How to set up FireWire in a LAN on my Satellite P300-17 s

Similar Questions

• How to set the global ip in lan

  Hi guys.

  I am new to cisco .i have some basic question.

  in my situation .i use a cisco 1841.

  Ethernet 0/0 .i value vlan serval in this port .with address 10.x.x.x 24

  Ethernet 0/1 .i set an ip address overall inside .with 219.x.x.x .and I have another preserved global ip address.

  nat is ethernet 0 / 0---> ethernet 0/1.

  and my question is: How do I create the DMZ .i want to define another global ip in my local network.

  How can I make this adjustment.

  any suggetsion?

  Hello

  To use global IP to your internal LAN, you need static NAT for the internal LAN IP external IP address.

  Use command below:

  IP nat inside source static

  Hope it works.

  Rate if it works for you.

  Kind regards

  Jose

• How to set the memory of the Geforce 7300 in Satellite A200-10W?

  Hello
  my laptop Satellite A200-10W, came with a Geforce 7300.
  I know that the card has its 256 MB dedicated memory, but I don't know how to use shared memory.
  In other how can words, I use the committed memory, as well as the memory shared of my cards.
  Thank you.

  Hello

  just for info: won´t you get more than 256 MB of RAM. The only graphics memory is your dedicated, I Don t know what you mean with that shared, in my view, there is no available shared mem.

  Welcome them

• How to set properly contrast of the display on a Satellite A200 - 19L

  Dear all,
  Day before yesterday I bought a Toshiba A200 - 19L.
  When I play DVDs and movies, as well as photos I look at the picture is very pale, no contrast.
  I asked already brightness with FN/F5 I think (Ido has no computer available here now)
  The images become darker, but not contrast.
  It remains very pale.
  What can I do?
  There are some parameters that influence the contrast?
  To my old Satellite, movies are excellent and light brilliant.
  Will I put the new machine on scrap and go back to my old?
  Regarding
  Siegfried

  Hello

  in a first time, you must make your screen brighter. You can make it work with pressing Fn + F7 (I think that Yes, there should be a symbol with triangle showing the tip upwards and a bit of sun/light bulb).

  Then, you should go to the display properties and there should be an option in the advanced settings that control the contrast. Just pay attention to this point.

  Give some feedback if you have achieved some success...

  Welcome them

• How to set up a Lan to Lan VPN without using your external IP address?

  I have two 28 subnets A & B.

  My PIX and ASA outside interface addresses are both in A subnet.

  I am in the middle of a migration of the PIX to ASA and need to use the PIX outside of the address of the interface on the ASA for the last two remaining lan to lan VPN.

  I do like that because the sellers of these virtual private networks to connect to are huge dinosaurs IT and the aaages to get their sh * t tri... This means that I have to pass the IP address to my ASA, so I can't sentence have change for a new IP peer.

  I tried to figure out how to set a specific my counterpart VPN IP address but I can't figure out how...

  I even physically connected a second ethernet port and tried to give a similar IP in the same range, which it says it is not possible to have both outside the IP addresses on the same subnet.

  Hello

  It is not possible to have an IP address "secondary" on the physics/logic interface of a Cisco firewall.

  And as you've noticed, you cannot configure the same subnet on 2 different interface either.

  We are talking about such a large configuration that you want to just migrate from completely to the ASA PIX and make a switch during a maintenance window?

  Couldn't you just pass the ASAs 'outside' IP address address to that on the PIX and move the ASAs 'outside' of the PIX? Or not the ASAs "outside" IP address already some configured related to what makes this impossible?

  -Jouni

• How to set up a wired LAN on a Wrt320n?

  Hello, I have a router Wrt320n, and it is connected to 2 desktops through cables of cable.

  a computer is Windows XP, and the other has Windows 7.

  Both computers receive the Internet connection and are visible to the router, but the two computers cannot interact with each other.

  Which means that we cannot share files or play multiplayer games between them.

  I would like to know how to set up a Local network for these two reasons.

  Thanks in advance.

  For sharing files between 2 calculates... Make sure that file and printer sharing is enabled... Also, make sure the computer are in the same workgroup... Default workgroup in Windows Vista has been renamed to WORKING group. In Windows XP, the default workgroup name is MSHOME...

  Also, see this link.

• How to set up the Office remotely between two pc in different countries

  Hi, I just want to know how to use Remote Desktop between PC Windows 7 in different countries...

  I just tried Windows remote assistance but it take too long to set up first help me post the invitation file and the key to past and then I download the file and open it with Windows Remote Assistance and then copy the access code and enter it in the text box vacuum... and blablablabla

  I have seen a lot of video on how to set up remote desktop for always as when I want to use remote desktop, just ask the user on the other computer and connect it
  How can I do
  Thank you

  * and what is Remote Desktop connection software in windows 7? (next to the Windows Remote Assistance) 

  
  
  looking for help

  First of all know what version of Windows 7 is running on the computer you want to access remote/control. Go to the Start button and type winver in the search window. Windows will report to the version in a pop-up window on your desktop.

  ***********************************

  Assuming that the computer is running Windows 7 Ultimate or Pro...

  The main steps are...

  • Activate [DRC] Remote Desktop on Windows 7 Ultimate DRC PC host.
  • If the login ID DRC on the Windows 7 Ultimate DRC host PC is not an administrator, and then add the user to the remote desktop users group. Don't forget the DRC connection user ID are local on the host Windows 7 Ultimate DRC PC not the DRC PC client.
  • Make sure that there is an exception in the Windows Firewall, or any third-party firewall on the Windows 7 Ultimate DRC host PC.
  • If the host Windows 7 Ultimate DRC PC is behind a router make sure that TCP Port 3389 is transferred to the LAN IP (static is preferable) of Windows 7 Ultimate DRC host PC.

  You can test TCP Port 3389 port through your router forwarding by going to the http://www.canyouseeme.org test site. For help setting up through any router port forwarding, go to the PortForward.com site for help. Ignore references to UDP Port 3389.

  http://PortForward.com/English/applications/port_forwarding/Remote_Desktop/Remote_Desktopindex.htm

  Test call Windows 7 Ultimate DRC host PC from another PC or laptop computer on your local network using its LAN IP address (static is preferable).

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  To call from a remote location using the public IP address of the router to the PC host of Windows 7 Ultimate DRC is behind or a full domain name [FQDN] of DynDNS (which I assume that you have already configured).

  Its highly recommended that you use Network Level Authentication [KLA] If you connect remotely from a Windows 7, Vista or XP SP3/SP2 client.

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html#SP3

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/host-UseNLA.jpg

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/ClienttoServer-UseServerAuth.jpg

  Make sure that you use the latest version of the client if your connection from a client computer to Vista or XP SP3/SP2. Windows 7 includes the new RDC client software.

  http://support.Microsoft.com/kb/969084

  General help written for Vista, but close enough to Win 7...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html

  MSFT Win 7 DRC help pages...

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/search?q=remote+desktop&PRD=Windows7

  ***************************************

  If the remote computer runs Windows 7 Home Premium...

  Windows Live Mesh 2011 remote connections works well for the access/remote control of a computer Windows 7 Home Premium. It gives you a nice Remote Desktop display type of the Office from remote computers.

  http://explore.live.com/Windows-Live-2011-system-requirements

  You can use a web browser to access without installing any software, other than an ActiveX control, on the remote client or install Live Mesh on the client. Your choice.

  http://explore.live.com/Windows-Live-Mesh-Remote-Desktop-using?OS=Mac

  http://explore.live.com/Windows-Live-mesh-devices-remote-connections-what-UI

  If you use Live Mesh Remote Connections I suggest to create a Live ID limited account type that does not include an e-mail account. I have install a limited Live ID I use only to connect to some Live Mesh remote connections to computers I want / access control.

  https://accountservices.passport.NET/ppnetworkhome.SRF?VV=1200&mkt=en-us&LC=1033

  You can, if you wish, also use an existing Live ID or create a new, but this is your choice.

  I installed Live Mesh 2011 on desktop Win 7 Home Premium to my wife and in distance/access control can it go literally anywhere. Sometimes I use the web based (IE. Method ActiveX) from my laptop on the desk.

  Here is an example of a session Windows Live Mesh 2011 remote connections on my laptop computer for access to the / remote control of desktop Win 7 Home Premium to my wife.

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 402 & Thierry = 25AB668DA65C8FBE! 118

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 401 & Thierry = 25AB668DA65C8FBE! 118

  Otherwise if you want to remotely control a computer looking Windows Home Edition to TeamViewer (free for personal use) or VNC (my favorite is UltraVNC with its encryption plugin) as the other two alternatives.

• new update of Apple Watch doesn't have My Watch tab. I can't understand how to set up friends or family ring

  I updated my Apple Watch with the latest version of the software that is 10 IOS. But the last update did not My Watch tab in the settings. I can't understand how to set up friends or family ring? Any help on this will be appreciated.

  Hello

  IOS 10 (as in the previous version of iOS), My Watch tab is located in the application of the watch (not in the settings).

  If you have also updated your Apple Watch to watch OS 3, note that the application of friends (accessed via the side button, with a circle of people) has been removed from the watch and that there is no direct replacement for this feature.

• How to set one of my pictures as a screen saver

  I can't understand how to set one of my own photos as the screensaver on my iMac... How do I do it please?

  System Preferences > desktop and screen saver > screen saver > select one of the modes that uses a table > screen saver Options > choose a folder...

  Made in regards to the BONES of the Mavericks.

  Clearly, it will work best when you have more than one image.

  I guess you mean screensaver and no paper painted (preferably same group)?

• How to set the number of e-mail messages that are stored on my iPhone

  How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.

  This is series is not defined in the world

  You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area

• How to set google as homepage

  How to set Google as my homepage on newly installed Windows 8.1

  There is a separate forum for questions of Firefox, but...

  In the MenuBar in FIREFOX, select Tools-Options-general

  The first two fields are to set the home page.

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• How to set the default android home page.

  How to set the home page in the latest browser of firefox for android?

  Hello:

  Unfortunately you can not remove the top sites home page but you can pin a site, remove a site from unpin it and change the url of a pinned site.

  Please read this article for instructions.

  I hope this helps!

• How to set the time between slides in a slideshow (iPhoto, el capitan)

  How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.

  See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice

• How can set resolution screen on firefox, I know zoom in and out, but I want to upgrade my browser to my upgrade zoom

  Hello
  How can set my screen resolution of firefox (I know zom in and outside zom, but when I restart my firefox it chanaged to perviose zoom level)

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution. There are several ways to solve this problem. See the Web pages are broad and fuzzy after update of Firefox - how to fix article for a suggestion. Here is another possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.