How to set up the connection to a wireless network.

Similar Questions

• Where and how can I increase the distance for my wireless network?

  My router for my wireless network is in the family room.  I'm sitting in the living room and have only 2 bars at the moment.  Most of the time, I can't get a connection.  How can I increase the distance and how can I make sure?

  Hello

  What version of the Windows operating system is installed on your computer?

  I suggest you to refer to the following Microsoft article and check if it helps.

  10 tips to help improve your wireless network:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  Hope the information is useful.

• How can I disable automatically connects to a wireless network?

  How can I disable the automatic connection on wireless network connection?

  In the lower right corner of your screen, you have an icon with several bars.  It is the WiFi icon.  A click on that and you will see a list of WiFi connections.  Right click the one you want to change, and then click Properties.  Click the connection tab and uncheck the box to automatically connect when the network is in range.  And then click OK.

  I hope this helps.  Good luck.

• How can I change the name of my wireless network?

  I use OS X 10.11.4 and utility Airport 6.3.6. I would change the name of my network and I don't know how or where to do this. And once this is done, have what I would do with my extreme and Express to continue them to work?   Any help would be appreciated. Thank you.

  Cheers, Peter

  I use OS X 10.11.4 and utility Airport 6.3.6. I would change the name of my network and I don't know how or where to do this.

  You can change the name of the network using AirPort Utility as follows:

  • Run the AirPort Utility.
  • Select the AirPort base station and then, select change.
  • Select the wireless tab.
  • The network name can be changed in the field "name of the wireless network. Enter the desired name, and select update.

• How to set up the connection BT of PDA?

  Hello :)

  PDA cannot find the ActiveSync service, although Windows Mobile Device Center 6.1 runs, and the COM port is configured appropriately.
  PDA HTC P3300 Artemis-WinMob 5.0, Bluettoth, latest version 7.10.10 USB adapter
  IVT BlueSoleil works very well

  Manual * 'How to configure a connection between the PDA (Windows Mobile 6) and the Windows Mobile Device Center' * not help

  Windows 7 64 bit

  Check if the COM service is running:
  -Right click on the Bluetooth system tray icon
  -Select 'Options. '... »
  -Ensure to that 'Bluetooth COM port Service' is checked in the "Général" tab

• How to set up the connection after banner in Anyconnect 3.1.05170

  Hello, I'm trying configure Anyconnect for the first time on an ASA 5505 (we use Cisco VPN Client on a 2800 router). I have Anyconnect version 3.1.05170 installed and I try to figure out how to get a connection pop-up banner after who said... "WARNING!" you are logging..,"and then gives the user an option to 'Accept' or 'Disconnect '. I've seen some previous posts that mention the banner, but I can't seem to find the location for her in ASDM or CLI.

  I tried to change the 'fr' file in the 'GUI and text' box, it only changes the message during the VPN connection process, but again, he does not have a "pop-up" banner and when I try to configure a DAP; a message box appears only when I choose "Cancel". I could keep looking but thought that it would be better to ask someone who already knows how to do this...

  Hello

  you could create a banner of login under Setup > remote access > clientless SSL VPN access > Group Policies

  see the example in the link below:

  http://ccnpsecuritywannabe.blogspot.com/2014/05/clientless-SSL-VPN-smart...

• How to set up the connection HP LaserJet P1102w wireless in Mac 10.9.2

  Hello, so I need help to set up my wireless printer (HP LaserJet P1102w) to my computer (Mac 10.9.2)

  OK, here is your support page with everything you need to get running.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&product=4110396

• I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run"wzcdlg.dll, FlashConfigCreateNetwork"

  Original title: wireless network connection wizard does not work

  How can I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run 'wzcdlg.dll, FlashConfigCreateNetwork' I can see no wireless connections more.  Not sure why all of a sudden it stopped working.  Thank you!

  Hi ChadWilliams_1974,

  Try the following methods:

  Method 1: Try the steps from the link.

  Troubleshooting network connection problems:

  http://www.Microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx#3

  Method 2: Reset TCP/IP Protocol, you can run the fix it from the link below and check if the problem is resolved.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  I hope this helps.

• How to run a script as administrator and copy some setting of the connected user's profile?

  I want to copy some profile setting to the connected on folder (% userprofile%\AppData\Roaming\Microsoft\Word) user profile password when they connect. Because the standard user accounts do not have the right admin to copy files to the folder, so I use schedule a task to run the .cmd as local administrator every time that a user login. But, when I use the % username % setting to try copying the file to the logged on user profile, the setting of % username % is interpreted as the name of the local administrator because the scheduled task is run as administrator. Therefore, the file is exemplary in the local Administrator profile. All solutions? Thank you

  I log on as a user account standard and do a right-click the .cmd and run as admin. The script interpreter .cmd parameter of % username % as the admin because I ran as administrator.

  -> Not altogether. There are two cases:

  • You are connected under an administrator account. When you right click on cmd.exe, then you get a 'high' console session that is still running under the name of your current account.
  • You are connected under a regular account. When you right click on cmd.exe and then you get a prompt and admin account name and its password. The new session is running under admin account.

  Is there a way to set the parameter to % username % as long as the logged on user, when you run the .cmd as an administrator.

  -> No - see above. Execution of a session high under a regular user account would defy the principle of administrator accounts.

  Either of these two options, I gave you in my previous answer might work, with a bit of scripting. A much simpler method would be to restore the default permissions to the %userprofile%\AppData\Roaming\Microsoft\Word folder. Normally full, users have access to it. This is my preferred option. With the help of a scheduled task that is running under an administrator account is a kludge.

• When I try to connect to my wireless network, that it asks a security key how do I find the key my router is a comtrend CT-5363

  When I try to connect to my wireless network, that it asks a security key how do I find the key my router is a comtrend CT-5363

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. who is your internet service provider?

  If you use windows7, I suggest you to follow the steps from the links and check out.

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a security key for a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-security-key-for-a-wireless-network

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder

• How to set up the internet conection with Windows XP?

  Hello, I just got a windows XP computer, and I'm trying to configure internet for this. I have an ethernet cable that connects to it, but when I plug it in, nothing happens. I open internet Explorer, but I put a dial widget pass. I tried to configure the interent in Control Panel Network, but it did not work. I have a modem that connects to a D-Link router and from there, to your computer and the computer XP. Please help me to set up.

  Hi Brainiac107,

  You get the error message?

  Method 1:  You can see the steps outlined in the article below

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  Method 2:  You can follow the steps mentioned in the link below to make an Internet connection

  To establish an Internet connection

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/howto_i_client.mspx?mfr=true

  Also check out the article below

  How to set up a connection to the Internet in Windows XP Professional

  http://support.Microsoft.com/kb/305549

• Eclipse plugin Simulator - how to set up the network

  Hi I installed Blackberry JDE Eclipse plug-in successfully. My test app works fine on Simulator until he tried to open an HTTP connection to a URL (a real web address like www.google.comor localhost):

  Here's the code I used:

  S StreamConnection = null;
  Try

  {

  s = (StreamConnection) Connector.open (getUrl ());

  HttpConnection httpConn s = (HttpConnection);

  State int = httpConn.getResponseCode ();

  ...

  }

  So my question is how to set up the simulator so that it can open the connection to the network.

  Of BlackBerry MDS Simulator is packaged and installed with the plugin Eclipse and can also be downloaded separately if necessary. You can configure to start the MDS Simulator with your simulator of aircraft in debug/run dialog box. For more information about these steps, see the Eclipse plug-in for the next topic test a BlackBerry Application that uses an HTTP connection.

  To understand the parameter deviceside and information about network gateways, see the following resources:

  DB-00396: that is - different ways to establish an HTTP connection or socket
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  Video of transport network:

  http://NA.BlackBerry.com/eng/developers/resources/VideoLibrary.jsp#tab_ddetail_subtab_jde

  On BlackBerry's wireless data Transport Management - Part 1

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe?func=LL&objid=832210&objAction=browse&s...

• How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point?

  How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point? I am trying to connect a Samsung Galaxy stellar and receive an error page indicating that the DNS search failed. I do not know how to set up my computer, I have the wireless power and know how to connect to the hotspot from the phone. The phone is able to recognize the computer and its IP address, and the computer recognizes the phone and tries to connect but then displays the error message "DNS search failed.

  Any help would be great!
  Raquel

  Hi Raquel,.

  Do you have any security program installed on the computer?

  I suggest to go through the steps from the link provided and check if it helps.

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  You can also consult the manual of the computer for the same and check.

  If the problem persists, you can also contact manufacturing for known problems:

  Support.Toshiba.com

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this helps and let us know if you need more assistance.

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.