How to set up the Windows network access program?

Similar Questions

• How to set up the ASDM/HTTP access for Cisco ASA firewall

  Hi all

  I am looking for a solution / guide that will allow our ASA 5510, V8.4 (5) Firewall, ASDM version 6.4 (9) to help users Active Directory. I want to activate our administrators to access the ASA via ASDM using their AD accounts (a local administrator account also exist but not a password of General knowledge)

  Anyone would be abe to advise on a guide / Solution.

  Thank you very much

  If that you issue correctly you want active tpo AD authention for AMPS/HTTP access to the ASA. If it is correct that you have need of the following using the CLI to enable that command

  ASA-32-22 (config) # aaa authentication http console?

  set up the mode commands/options:

  LOCAL server predefined Protocol AAA 'local' tag

  Name WORD of RADIUS or GANYMEDE + aaa-server for the administrative group

  authentication

  After the console you needd to defind the name of the AD server you have configured on the SAA.

  You can do the same thing by using ASDM:

  

  Change LOCAL to the announcement that there are listed.

  I hope that answers your question.

  Thank you

  Jeet Kumar

• Windows 7. How can I remove the Windows media Center programs recommended in the "Open with" section?

  I select which application (Word, Excel, etc.), they all open with Windows Media Center. This happened recently and I don't know how to cancel it. I see the Windows Media Center in the 'Open with' box where it asks you to "choose the program you want to use to open this file. How I remove it from the section "recommended programs"? I see that Internet Explorer is also in this section. What should be there as well? What actually belongs to this group?

  "I see the Windows Media Center in the 'Open with' box where it asks you to"choose the program you want to use to open this file"." How I remove it from the section "recommended programs"? »

  A pretty easy regedit should remove an application from the section "recommended programs". Here is a procedure step by step on how to do it. Unfortunately, I don't think that will solve your problem. What seems actually to have occurred is either your .lnk .exe (or maybe both) have inadvertently been associated with WMC. Out of the list of the programs recommended for the open with dialog box will not change. In fact, the next time that you open the program, it will open in WMC and add automatically return a program recommended in the open with dialog box.

  There really should not be whatever it is that you open a .lnk or .exe with because you really don't want to open them... you want to run. To determine if the .lnk or .exe associated with wrong, you can either watch the extension file associations in the control panel > programs, or you can see if it's a shortcut or the actual executable file that does. Need to know who, or if she is at the same time, in order to complete the fix.

  Once you know it, this link will show you how to restore the default file type link. Matter of fact, now that I think of it, it wouldn't hurt to just restore default settings for .lnk and .exe.

  "I see that Internet Explorer is also in this section. What should be there as well? What actually belongs to this group? " I may be wrong, but I do not believe, you should really see anything in the open with dialog for a .lnk or .exe. Again, you don't want to really not open them... you want to run. The shortcut .lnk file goes to the executable and runs the .exe program.

• Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security

  In the diary of my application event log errors, I have many of these MSSHA ID 1027 events, get Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security.    I understand what its about, but have no idea how or what to do about it.  Help!

  http://TechNet.Microsoft.com/en-us/library/cc735442 (v = WS.10) .aspx? ppud = 4

  According to this site, no user action is required.

  I don't know why you receive this error message, but apparently is not a problem.

  http://msdn.Microsoft.com/en-us/library/dd565668 (v = VS. 85) .aspx

  the above site is a very detailed description of the error.

• Eclipse plugin Simulator - how to set up the network

  Hi I installed Blackberry JDE Eclipse plug-in successfully. My test app works fine on Simulator until he tried to open an HTTP connection to a URL (a real web address like www.google.comor localhost):

  Here's the code I used:

  S StreamConnection = null;
  Try

  {

  s = (StreamConnection) Connector.open (getUrl ());

  HttpConnection httpConn s = (HttpConnection);

  State int = httpConn.getResponseCode ();

  ...

  }

  So my question is how to set up the simulator so that it can open the connection to the network.

  Of BlackBerry MDS Simulator is packaged and installed with the plugin Eclipse and can also be downloaded separately if necessary. You can configure to start the MDS Simulator with your simulator of aircraft in debug/run dialog box. For more information about these steps, see the Eclipse plug-in for the next topic test a BlackBerry Application that uses an HTTP connection.

  To understand the parameter deviceside and information about network gateways, see the following resources:

  DB-00396: that is - different ways to establish an HTTP connection or socket
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  Video of transport network:

  http://NA.BlackBerry.com/eng/developers/resources/VideoLibrary.jsp#tab_ddetail_subtab_jde

  On BlackBerry's wireless data Transport Management - Part 1

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe?func=LL&objid=832210&objAction=browse&s...

• How to set up the order of priority of a start-up program

  Hello

  I'm using Pavilion laptop dv7-2110, Windows Vista 64 bit PC.

  Can someone explain to me how to set up the order of priority of a startup programs.

  Problem: Kaspersky Internet Security appeaps on the taskbar after Skype Torrent etc.

  Thank you in advance.

  You can access the start utility by typing "msconfig" in the start menu-> "search programs and files". From there, go to the Startup tab and you can select the programs to start and which not.

  Regarding the priority, I don't think there is a way, anyway you shouldn't be worried that your anti-virus starts just after other programs that it does not put you in danger.

  If you wish for a quick start you should probably disable most of the non-critical programs in the list, don't worry you do not break your computer if you uncheck anything that you don't know what it is, but I recommend that you don't have before checking what it is.

  Hope this helps

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?

  Good evening
  I have a toshiba qosmio f60, I read your answer about tv tuner.
  My question is: how to set up the tv with integrated antenna tuner? Thank you

  The tuner is already configured!
  You must use Windows Media Center.
  Here, you have to choose the tuner and need to look for available DVB - T channels.

  Notes; Signals DVB - T depends on the country and region.
  In my area I needed an external antenna because the signal is too weak.

• Qosmio F50 - 10Z - how to set up the bar multimedia?

  Greetings, have a question... because after a long time, trying to make it work, I can not find the problem...

  On my laptop, I reinstall Windows Vista, download all the drivers for the Toshiba for Qosmio F50 driver page, for Vista... and even how to set up the multimedia bar? With Dolby, sound on / off, light power... He s doesn't work do not. Are there special software required? Or can I put it somewhere?

  Thanks for help

  Use this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU research of Value Added Package 1.1.19

• How can I get the windows update? X8024400A error)

  I did a restore after my pro windows xp crashed now can't do windows update! How can I get the windows update? I get an error from the site Web has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. X8024400A error)

  Please help me!

  I could not download my favorite Antivirus unable to get updates.  Only a few site I couldn't even. It seemed to get worse until:

  I fould a place that gave me these instructions:

  1. Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • Regsvr32.exe atl.dll
     • Regsvr32.exe urlmon.dll
     • Regsvr32.exe mshtml.dll
     • Regsvr32.exe shdocvw.dll
     • Regsvr32.exe browseui.dll
     • Regsvr32.exe jscript.dll
     • Regsvr32.exe vbscript.dll
     • Regsvr32.exe scrrun.dll
     • Regsvr32.exe msxml.dll
     • Regsvr32.exe msxml3.dll
     • Regsvr32.exe msxml6.dll
     • Regsvr32.exe actxprxy.dll
     • Regsvr32.exe softpub.dll
     • Regsvr32.exe wintrust.dll
     • Regsvr32.exe dssenh.dll
     • Regsvr32.exe rsaenh.dll
     • Regsvr32.exe gpkcsp.dll
     • Regsvr32.exe sccbase.dll
     • Regsvr32.exe slbcsp.dll
     • Regsvr32.exe cryptdlg.dll
     • Regsvr32.exe oleaut32.dll
     • Regsvr32.exe ole32.dll
     • Regsvr32.exe shell32.dll
     • Regsvr32.exe initpki.dll
     • Regsvr32.exe c:\windows\system32\wuapi.dll
     • Regsvr32.exe c:\windows\system32\wuaueng.dll
     • Regsvr32.exe wuaueng1.dll
     • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
     • Regsvr32.exe c:\windows\system32\wups.dll
     • Regsvr32.exe wups2.dll
     • Regsvr32.exe wuweb.dll
     • Regsvr32.exe qmgr.dll
     • Regsvr32.exe qmgrprxy.dll
     • Regsvr32.exe c:\windows\system32\wucltux.dll
     • Regsvr32.exe c:\windows\system32\muweb.dll
     • Regsvr32.exe c:\windows\system32\wuwebv.dll
  2. Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
     netsh winsock reset
  3. If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
     Proxycfg.exe d
  4. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net start bits
     • net start wuauserv
  5. If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
     Bitsadmin.exe/Reset /allusers
  6. Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  7. Restart the computer.

  After doing these, well most of them work. When I clicked on OK, but some are not. All of this worked!   I was able to update.  I was about to throw my computer!

  I don't know the tip you give here would have worked more quickly.  I just couldn't not here. Something was originally internet Exployer of do not leave me here.

  I had to work on him. Now everything seems to work very well. I have sort of my breatgh again and wory that error could haoppen again.

  1 million for your help thanks. It's great to have a place like this with pro like you here.  Much appreciated by a non pro like me.  Great place to learn more about computers.

• Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

  Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

  Hi Rosa,.

  The size of the window for Hearts is actually design in Windows XP.

  However, there is a solution. You can follow these steps:

  
  Step 1

  a. first of all, copy the game.

  b. click Start, all programs, games.

  c. right-click on the game of hearts .

  d. Select Properties from the list.

  e. press the button find the target on the next window.

  f. right click on the highlighted file and select copy.

  g. then paste the copy on your desktop.

  h. right click on your desktop.

  i. Select Paste from the list.

  Step 2

  Finally, we will change the resolution for the game setting:

  a. right click on the game you just pasted on your desktop.

  b. Select Properties from the list and click the Compatibility tab.

  c. put the check box marked "run in 640 x 480 screen resolution.

  d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

  Hope the helps of information.

• How to set up the wireless keyboard

  How to set up the HP Pavilion new elegant laptop 15 and an external monitor with the lid closed. As the use of the laptop as a desktop with external display. Follow the work as long as the flap of the laptop is open.

  If you use Windows 7, and then click Start-> Control Panel-> hardware and sound-> Power Options. It should be a list on the left side of the window, choose the one that says "choose the closing the cover. Select do nothing to do. Should work even in Windows 8, as well.

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• How can I change the looks of Access Infrastructure Web location for the virtual machine files?

  How can I change the looks of Access Infrastructure Web location for the virtual machine files?

  My default is set to MACHINES C:\VIRTUAL.  But I want to change it to turn to an external drive connected with an eSata cable. Can I do this?

  Hello

  Add just like a new data store.

  Login to your web access, select your host (not the virtual machines) in the left menu.

  You should see a link on the right side with "Add data store", give it a name of store and add the directory.

  Now, you can add a virtual machine to this place.

  Good luck!

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki