How to set up the osb and soa in the only area

Similar Questions

• How to set up the password disk HARD on Equimum L40-141?

  Hello

  Can someone tell me how to set up the hard drive on my laptop password above please?

  Thank you
  Jane

  Hello

  Have you checked the settings in the BIOS?
  My BIOS contains an option for the HARD drive password parameter.

  But just a question; Why do you want to set the HARD drive password?
  Is this really necessary?

  You need to know if the HARD drive has been fixed, and that something will go wrong, I mean that if you would forget the HARD drive password, the HARD drive would be locked and is no longer usable.
  So be careful with this password if you want to know my opinion; Don t pay.

  Welcome them

• Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?

  Good evening
  I have a toshiba qosmio f60, I read your answer about tv tuner.
  My question is: how to set up the tv with integrated antenna tuner? Thank you

  The tuner is already configured!
  You must use Windows Media Center.
  Here, you have to choose the tuner and need to look for available DVB - T channels.

  Notes; Signals DVB - T depends on the country and region.
  In my area I needed an external antenna because the signal is too weak.

• How to set on the Sony NEX-6 automatic exposure bracketing

  How to set on the Sony NEX-6 automatic exposure bracketing

  Hi FotoEdge,

  You can adjust the automatic exposure of the support under Menu section. Instructions and information on this option is referred to in the #58 manual page.

• How to set up the multimedia keys (only the last 3 buttons)

  Hello

  How to set up the multimedia keys (only the last 3 buttons)? The first button works, you open the browser and the other open WMP.
  But the last 3 buttons (play/pause, Stop, forw/rewd) aren´t work with WMP. How can I fix?

  Thank you

  Hello

  Can you please tell us what model of laptop Satellite A do you have?

• Qosmio F50 - 10Z - how to set up the bar multimedia?

  Greetings, have a question... because after a long time, trying to make it work, I can not find the problem...

  On my laptop, I reinstall Windows Vista, download all the drivers for the Toshiba for Qosmio F50 driver page, for Vista... and even how to set up the multimedia bar? With Dolby, sound on / off, light power... He s doesn't work do not. Are there special software required? Or can I put it somewhere?

  Thanks for help

  Use this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU research of Value Added Package 1.1.19

• How to set up the wireless keyboard

  How to set up the HP Pavilion new elegant laptop 15 and an external monitor with the lid closed. As the use of the laptop as a desktop with external display. Follow the work as long as the flap of the laptop is open.

  If you use Windows 7, and then click Start-> Control Panel-> hardware and sound-> Power Options. It should be a list on the left side of the window, choose the one that says "choose the closing the cover. Select do nothing to do. Should work even in Windows 8, as well.

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi

• How to set up the order of priority of a start-up program

  Hello

  I'm using Pavilion laptop dv7-2110, Windows Vista 64 bit PC.

  Can someone explain to me how to set up the order of priority of a startup programs.

  Problem: Kaspersky Internet Security appeaps on the taskbar after Skype Torrent etc.

  Thank you in advance.

  You can access the start utility by typing "msconfig" in the start menu-> "search programs and files". From there, go to the Startup tab and you can select the programs to start and which not.

  Regarding the priority, I don't think there is a way, anyway you shouldn't be worried that your anti-virus starts just after other programs that it does not put you in danger.

  If you wish for a quick start you should probably disable most of the non-critical programs in the list, don't worry you do not break your computer if you uncheck anything that you don't know what it is, but I recommend that you don't have before checking what it is.

  Hope this helps

• Eclipse plugin Simulator - how to set up the network

  Hi I installed Blackberry JDE Eclipse plug-in successfully. My test app works fine on Simulator until he tried to open an HTTP connection to a URL (a real web address like www.google.comor localhost):

  Here's the code I used:

  S StreamConnection = null;
  Try

  {

  s = (StreamConnection) Connector.open (getUrl ());

  HttpConnection httpConn s = (HttpConnection);

  State int = httpConn.getResponseCode ();

  ...

  }

  So my question is how to set up the simulator so that it can open the connection to the network.

  Of BlackBerry MDS Simulator is packaged and installed with the plugin Eclipse and can also be downloaded separately if necessary. You can configure to start the MDS Simulator with your simulator of aircraft in debug/run dialog box. For more information about these steps, see the Eclipse plug-in for the next topic test a BlackBerry Application that uses an HTTP connection.

  To understand the parameter deviceside and information about network gateways, see the following resources:

  DB-00396: that is - different ways to establish an HTTP connection or socket
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  Video of transport network:

  http://NA.BlackBerry.com/eng/developers/resources/VideoLibrary.jsp#tab_ddetail_subtab_jde

  On BlackBerry's wireless data Transport Management - Part 1

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe?func=LL&objid=832210&objAction=browse&s...

• How to set programmatically the current node in a tree view of the ADF.

  Hello
  

  I'm trying to understand how to set programmatically the current node in a tree view of the ADF.

  My use case example is quite simple; If we take the sample application ADF Summit where under Management Summit, we have a tree view on the left with a list of high level of the country which in turn contain a subset of customers; then, in the right pane, we the customer detail information.

  What I'm trying to achieve is a solution by which I can add a new customer, commit and then to the tree show the client newly created as the currently selected entry.

  I use a pop-up dialog box to create my new entry of the customer and everything works well in this area, and my newly created folder is saved in the database.

  I know how to force the tree to cool off, but what I can't understand is how to do so, it highlights the newly created folder.

  Any help would be much appreciated.

  Refer

  https://blogs.Oracle.com/jdevotnharvest/entry/how_to_programmatically_disclose_a

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/78-man-expanding-trees-treetables-354775.PDF

• Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Please let me know how to start.

  Please try to follow: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• How to set up the workflow in 11i

  How to set up the workflow in 11i
  
  
  EBS 11i,
  Linux-Oracle
  DB - 10.2.0.4

  Please follow

  Control - Workflow: Setup-ID Doc: 113664.1
  Configuration of the envelope of Notification based on Java Oracle Workflow 2.6 with Oracle Applications 11i [ID 231286.1]

  11i/R12 - a guide for troubleshoting emails of Notification Workflow - inbound and outbound Doc ID:831982.1
  Troubleshooting incoming e-mail Notifications [ID 1184846.1]
  Troubleshooting Workflow Oracle Applications 11i [ID 262011.1]
  UAS: Diagnostics, Solutions and information [ID 332152.1]

  Workflow control
  Re: Setup R12 Workflow
  Workflow notifications are sent, but messages are not sent

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder