How to simulate a joint manipulator

Similar Questions

• How do simulate you a right-click of the mouse on the touchpad?

  How do simulate you a right-click of the mouse on the touchpad?

  You open the Boot Camp Control Panel and put in place the pad to work how you want it to run. I have the lower-right corner of the touch pad as a right click.

• How to simulate cRIO in labVIEW?

  Hello everyone!

  I m new to labVIEW and I want to simulate cRIO on it. I read all the posts on this issue, but none of them has really solved the problem. In fact, I read the solution given on or developer area titled "how to simulate FPGA targets in labVIEW with the help of the Project Explorer'. However, when I tried to follow the instructions given here, I realized that on the opening "Untitled project" - 'New', my system shows that 'new' as an option "Target Folder" and not "targets and devices." Why is it so? I asked for a few of my friends, but unfortunately they are too new to labVIEW. I, therefore, ask you to help me with this problem. Please answer in a simple language, I understand (a beginner with labVIEW)!

  Thanks a lot for your help!

  Herschelle

  Hi Herschelle,

  LabVIEW FPGA for LabVIEW 2011 SP1.

  Time real LabVIEW LabVIEW 2011 SP1.

  These downloads will give you both of the modules for 30 days free evaluation mode. You can then get in touch with your local branch of National Instruments on 01635-523-545 and buy a license of one of our internal sales engineers. Alternatively, you can also buy the software online through the software product pages.

  Product page for the FPGA Module.

  Product page for the real time Module.

  I hope this helps!

• How to simulate a right-click in LabVIEW

  I write code in LabVIEW to record the activities of the mouse for example move, click on the mouse and the right click of the mouse to the left.  I'm able to reproduce the movement by dragging and click of a mouse., but the right click of the mouse to the left.  Can someone show me how to simulate a RIGHT mouse click in LabVIEW?  Thank you very much.

  Son

  Have you looked into the case of the structure of the event time-out?

• How to simulate GPS on blackberry tablet.

  How to simulate GPS on blackberry tablet.

  I have seen this thread but does not have the relevant information.

  Kindly let me know setp by the set procedure.

  I guess that this post would be useful... to simulate the GPS close to Charlottesville, WILL

  jtegen wrote:

  Here's the simulator of GPS functions.  Works very well to work around the fact that the Simulator simulates a GPS and I don't have a PB (yet).  This Simulator is near Charlottesville, Virginia.

  package gps{    import flash.events.Event;    import flash.events.GeolocationEvent; import flash.events.TimerEvent;   import flash.sensors.Geolocation; import flash.utils.Timer;
  
  public class GpsPositionDriver{  private var timer        : Timer = new Timer( 2000 );  private var gps_service  : Geolocation = null;  private var last_step    : int = 0;  private var data         : Array = new Array();  private var start_time   : Number = 0;
  
  //////////////////////////////////////////////////////////////////public function GpsPositionDriver( sensor : Geolocation ){ this.gps_service = sensor;    this.timer.addEventListener( TimerEvent.TIMER, Ping );
  
    var now : Date = new Date();  this.start_time = now.getTime();
  
    // data   this.data.push( { altitude : 600, heading : 45, hacc : 100, vacc : 100, latitude : 38.020654096686464, longitude : -78.53692074499511, speed : 10 } );    this.data.push( { altitude : 601, heading : 46, hacc : 100, vacc : 100, latitude : 38.02160072090434, longitude : -78.53949566564941, speed : 12 } ); this.data.push( { altitude : 601, heading : 270, hacc : 100, vacc : 100, latitude : 38.022090932211185, longitude : -78.54177017889404, speed : 13 } );   this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02234448849692, longitude : -78.54357262335205, speed : 15 } );
  
    this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02242900706387, longitude : -78.5454179831543, speed : 2 } );  this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.022344488497076, longitude : -78.54835768423462, speed : 3 } );    this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02227687357351, longitude : -78.55168362341308, speed : 5 } ); this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02210783599131, longitude : -78.55638285360718, speed : 1.5 } );   this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02187118272113, longitude : -78.56230517111206, speed : 1 } ); this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02166833645269, longitude : -78.56691857061767, speed : 5.5 } );   this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02166833645269, longitude : -78.57022305212402, speed : 5 } ); this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.022006413255085, longitude : -78.57387085638427, speed : 5 } );    this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02283469482895, longitude : -78.57738991461181, speed : 2.5 } );   this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02454193955506, longitude : -78.58196039877319, speed : 17 } );    this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.0275675527831, longitude : -78.58826895437622, speed : 8 } );  this.data.push( { altitude : 601, heading : 290, hacc : 100, vacc : 100, latitude : 38.029832455209, longitude : -78.59288235388183, speed : 7 } );   this.data.push( { altitude : 601, heading : 300, hacc : 100, vacc : 100, latitude : 38.0320803861371, longitude : -78.59751721105957, speed : 10 } ); this.data.push( { altitude : 601, heading : 25, hacc : 100, vacc : 100, latitude : 38.033009961471976, longitude : -78.59901924810791, speed : 12 } );    this.data.push( { altitude : 601, heading : 30, hacc : 100, vacc : 100, latitude : 38.034598662916025, longitude : -78.6012508460083, speed : 11 } );
  
  }
  
  /////////////////////////////////////////////////////////////public function Start() : void{    this.timer.start();}
  
  /////////////////////////////////////////////////////////////public function Stop() : void{ this.timer.stop();}
  
  /////////////////////////////////////////////////////////////////private function Ping( event : Event ) : void{  var now : Date = new Date();
  
    var evt : GeolocationEvent = new GeolocationEvent( GeolocationEvent.UPDATE ); evt.altitude           = this.data[this.last_step].altitude;  evt.heading            = this.data[this.last_step].heading;   evt.latitude           = this.data[this.last_step].latitude;  evt.longitude          = this.data[this.last_step].longitude; evt.horizontalAccuracy = this.data[this.last_step].hacc;  evt.verticalAccuracy   = this.data[this.last_step].vacc;  evt.speed              = this.data[this.last_step].speed; evt.timestamp = now.getTime() - this.start_time; // ms from runtime initialized
  
   this.gps_service.dispatchEvent( evt );
  
    this.last_step++; if( this.last_step == this.data.length )this.last_step = 0; // reset
  
      }  }}
  

• How save/simulate an arrow key?

  Hello

  I need to register the software simulation using:

  -arrow keys (for the input field/menu selection).

  -Return the key (for the validation of choice).

  Capture screen is, of course, is not a problem, as I do it manually.

  What I did find is: how to simulate a button arrow.

  IE: tell the user of the lesson to "press the arrow key to enter the menu of xxxxx." and do it...

  I tried to use the field text, with empty response and with arrow key down as validation key, but it does not work...

  Thank you.

  Hello

  It helps please, if you tell us what version of Captivate you use.

  For more interactive objects (click boxes, buttons, text input boxes), the user can get a "successful action" by clicking (for Click box, touch or the Send button to a text entry area) OR by using a keyboard shortcut. By assigning this shortcut key (e.g. Enter), you allow the user to use this key. CP5, you'll find it in the property Panel, area Action. For CP4 find you this shortcut key in the p.e. Button, first tab properties dialog box.

  Lilybiri

• How to simulate overprinting in Acrobat Standard?

  I know how to simulate overprinting in professional but it is in the standard?

  anyone?

  You ask what about printing or display?

  I will answer from the point of view of Acrobat 9 Standard.

  Display: in the preferences > display the Page in the "Page content and information" section, you have a few options for the simulation of overprinting. (Only for the PDF / x files - this is the default;) Never, always, automatic). Automatic examines the document for any content which should simulate overprint preview IT to display as it would when printing. Acrobat 8 should have similar, but not all options.

  Printing: You cannot simulate overprinting when printing Acrobat Standard. (I refer to the parameter in the Advanced Print dialog box in Acrobat Pro that allows you to simulate overprinting in the printed output for proofing on a printer that does not support overprinting)

  Does that help?

• How to simulate a right CTRL key on a Satellite M30?

  Hello!

  I don't have a right CTRL key on my Satellite M30. But one of my frequently used desktop application need this key and redefine in the request is not possible. How can I simulate this right CTRL key on my laptop?

  Hello

  Read the user manual. There, I found the info that the key combination FN + Ctrl simulates the right CTRL key to extended keyboard.

• How to simulate a DAQ hardware and use it to test applications without hardware?

                         How can I simulate a DAQ in MAX material and use it to test applications without hardware?

  If my application requires input from external hardware to do how can I simulate a DAQ hardware in LabVEIW?

  I need to simulate several digital inputs and outputs to test the software. currently I have not the material and material DAQ here.

  answer with your valuable suggestions.

  Thanks in advance

  RENN

  Hello

  There is no option to simulate the traditional device. You need hardware for it so I would say to simulate a PXI system that has a configuration similar to the PCI-6014 and make a small change to your request...

• How to simulate the locking mechanism?

  I downloaded the BB10 Simulator and it works.  How can I simulate keys hw on the device using the Simulator?  For example, if I press the power button top on the Z10 or Q10, the device locks.  How can I simulate this in the Simulator?

  Hello

  You can use the controller. It is available in the controller file in the same directory where your Simulator installed.

• How to simulate BlackBerry options/commands from java code?

  Hi friends,

  For wipe/erase of personal data, we have the following option on BlackBerry phone (model: 9930)
  Options of-> Security-> Security Wipe

  I want to give the same option in my BlackBerry App (e.g.. A button marked "clear data")
  How can I simulate the same functionality through java code

  Can someone please provide some help or provide a reference to the entire API

  Thank you

  Laughing out loud
  You can enter simulation (clicks, presses), and you can launch native applications, if you know their module name, but both approaches have their limitations.

  See http://www.blackberry.com/developers/docs/7.1.0api/net/rim/device/api/system/ApplicationManager.html... or http://www.blackberry.com/developers/docs/7.1.0api/net/rim/device/api/system/ApplicationManager.html... to see how to apply.

• How to get the JOINT-2 log file

  Hi, we installed in the 6500 system JOINT-2 cat. Anyone know how to get the syslog JOINT-2 file? and how config to send the log to syslog server? I know that these two questions are quite simple, but I've yet to find answers.

  Any help would be greatly appreciated.

  You can get the JOINT events to the CETS format. Using the Manager of IPS or other tool to collect these logs.

• How to simulate failover with 6.5.1 or auto-passage vCSHB to the

  Hello

  How do we simulate the auto-passage or failover with vCSHB 6.5.1?

  In the installation guide, you will find a chapter entitled: "Installation check" - pag 49. You can find the details on you can do these tests.

• How to simulate failover

  Hello

  How can I simulate vCenter Server Heartbeat failover? I have a P2V configuration and have need test if failover is working or not. Turn off the primary Server does not automatically switched to the secondary Server vCenter vCenter.

  Hello

  See pg 27 of https://docs.google.com/viewer?a=v&q=cache:daDQCRMWQr4J:www.vmware.com/pdf/vcenter-server-heartbeat-63-u1-quick-start-guide.pdf+&hl=en&gl=ie&pid=bl&srcid=ADGEESgLeNQw-DsNpP_pCuPJLGx-W70ZVF-7eNRgNB9uIO5l0AbMniKLKmpK7uFaTccOFPInY9K6bxQquSV-OfGQ8U7ozWp2FmrVnaLThMYdK7d96qAqUpnwV6rsFpB9HAIPwZqYjuN9&sig=AHIEtbSIDK_od1nOhxjmQjMichoc0aQjJQ

  Failover details simulation tests.

  Many tx

• How to simulate the form-update which is used by messageBox

  Hello

  I use a script object to my function to add/remove lines in my PivotTable.

  If I do NOT use the messageBox whenever I call the function, I get some problems with my index of the table. T

  It would be too difficult to describe all aspects of my code, so let us cut a long story short.

  MessageBox is a kind of update the form. How can I simulate this update without using messageBox?

  XFA. Form.Recalculate (1); does not at all help

  function addORremoveRow (myCheckBoxAsObject) { }

  xfa.host.messageBox ("without me any updated!");

  ... If checkBox "off the table" = click on-> add row

  ... If checkBox "off the table" = clicked-> delete line

  }

  I'm not able to tell you what's wrong with your form, so I would need more information.

  So I guess that your need to add something like xfa.layout.relayout (); to your script.