How to start a PowerCLI Script automatically

Similar Questions

• How to start Oracle HTTP server automatically during the startup of the server?

  I installed the software of Oracle 11 g (fusion).
  
  I use only the Oracle HTTP component in any merger software for my Apex 4.0 to work.
  
  Now to start the Oracle HTTP server is a command:
  
  opmnctl startall
  
  
  (1) I wanted my Oracle HTTP server starts automatically each time my server reboots (Windows 2008 R2).
  
  How do I do that? Is there a place in Windows (autoexec) or somewhere I can copy the above command
  If the operating system runs this command every time when the server is restarted, instead of me manually
  execution of the command.
  
  
  
  Thanks in advance.

  I have a Linux script that does this. Maybe you can convert:

  #! / bin/bash

  ###############################################################################
  # Description: Script starting and stopping iAS and reboot after shutdown #.
  # File: iasora #.
  ###############################################################################

  # Global Variables - change as needed.
  #
  #
  IAS_FILE = "/ u01/app/oracle/product/midtier/bin/emctl." PID.
  RETRIES = 3

  # Set the script excution environment

  . / Home/Oracle/ias10g_midtier. Profile

  # Determine and perform actions based on the command line parameter

  case '$1' in

  implementation)

  LOOP_COUNTER = 1
  up to [f $IAS_FILE]
  do
  echo 'date '.
  "ECHO"
  echo "Starting Oracle iAS components."

  sleep 2

  Su - oracle-c ' $ORACLE_HOME/opmn/bin/opmnctl startall verbose; output.

  echo "Starting Oracle iAS Server Control Application"

  sleep 2

  Su - oracle - c "$ORACLE_HOME/bin/emctl start iasconsole '.

  If [! f $IAS_FILE]
  then
  If ['$LOOP_COUNTER"- eq"$RETRIES"]
  then
  echo "I give up. The file does not exist on the server.
  Echo "or something else failed."
  ECHO «»
  # At this point we could not download the file, send an alert...
  mailx-s 'cannot restart iAS' [email protected]<>

  on the other
  echo "the next restart attempt will be in 15 seconds... Please wait. »
  LOOP_COUNTER = ' expr $LOOP_COUNTER + 1' # increment the counter.
  sleep 15

  FI
  FI

  fact

  touch/var/lock/subsys/iasora

  sleep 30
  ECHO «»
  ECHO «»

  ;;

  *)

• How to start, stop, and restart automatically

  Hello

  I'm Pramod.S, I PCI - 5154 digitizer, I'm acquirng data now my question is I want to acquire the data for say 1 min to stop, after the gap of 2: I want to start acquirng again automatically for 1 min. can you please guide me in this way. I'll be gratefull if you send examples to demonstrate this feature.

  Pramod Hello,

  Regarding your question on the acquisition of a min, wait 2 minutes and acquires again for a minute, you'll need to create a program to control the acquisition and away. Is there a programming language you will use to control the acquisition?

  A simple control may use the function time in LabVIEW feature to see how long the acquisition has run before deciding to interrupt the acquisition and become inactive for 2 minutes. A simple implementation to start is attached.

  Hope this helps

• How to secure my PowerCLI script?

  Is there a way to secure my script for those who want to see my beautiful code?

  If you don't use of PowerGui Pro ($), you can also do it yourself.

  See Make-PS1ExeWrapper of Keith Hill and the PS2EXE project on Codeplex.

• How to start the virtual machines automatically invited when the VMware Server 2 for Windows host boots

  The title pretty well summarizes my doubt... before I used VMware Server 1, but I can't find the option of starting the virtual computer to start host under the dialogue box "set up the VM.

  Please see attached screenshot.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• How to start the database aautomatically

  Hello
  
  Oracle Version: 10.2.0.1(standard edition)
  OS: FEDORA 7
  
  Can someone help me please on how to start the base database automatically when the server is in place.

  http://www.Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php

  Good, nice and clear link to auto-start the PB on linux.

  HTH
  Girish Sharma

• PowerCLI script start vm and check the boot

  Hello

  I try to do a powercli script to start the virtual machine and check when the (windows) operating system is completely open and ready.

  How can I do?

  Maybe this helps...

  Start-VM - VM - runAsync

  $vm = get - vm

  Start-Sleep - seconds 20;

  $vm | Get-VMQuestion | Game-VMQuestion - version - confirm: $false;

  do

  {

  Start-Sleep - seconds 5;

  $toolsStatus = $vm.extensionData.Guest.ToolsStatus;

  } While ($toolsStatus - not "toolsOK");

• When I start my laptop script error on the screen.what that means and how it get rid you

  When I start my laptop SCRIPT ERROR comes on my screen. What it means and how to get rid

  You have assigned to a category of forum that is completely different to your question/problem. Your question has been moved to a forum category that matches it's better.

  If you don't already specify the product name, Windows version, version of the program and other necessary information on the product you have a problem with: do so immediately!
  And please explain the problem more in detail. Do not try to give an overall summary abstract with terms invention. Use natural language. Explain step by step what you do and what you see and why it is a problem.
  Provide accurate and complete data: exact error message of name, exact product of exact, exact file names, exact address... you get!

• whenever I start my pc it automatically opens the disc clean up, I don't want that. How to stop this scheduled task?

  whenever I start my pc it automatically opens the disc clean up, I don't want that. How to stop this scheduled task?

  Ive tried to delete, but I don't think that it wrks. It appears again on the performance of the tasks. I actually put it to daily nd now I can't undo this action. is it possible to change the disc clean up [Settings?] I can't find it. Ive tried properties, but it will not let u

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How use/start this script?

  Hello

  Maybe a stupid question:

  I ve got the following from Hal Rottenberg script. It named s detailed - VMReport.ps1. I Don t know how to start it :-)

  Begin {}
  # For custom objects propertynames collection
  $PropertyCol = @)
  'Name', 'IP address', 'OS',' home', 'CPU (number)", '(MB) of memory', 'Drive (Count) hard',"HD capacity (Total KB)","Floppy drive (County)","CD player (number)","NIC (number)', 'NIC1 MAC address', 'NIC1 Net name.
  )
  }
  {In process
  If ($_ - isnot [VMWare.VimAutomation.Client20.VirtualMachineImpl]) {continue}
  $Process = "" | Select-Object - property $PropertyCol
  $Process.Name = $_. Name
  $Process. "" IP address "= $_. Guest.IPAddress [0]
  $Process.OS = $_. Guest.OSFullname
  $Process.Host = $_. $host.name
  $Process. "" CPU (County) ' = $_. NumCpu
  $Process. "" memory (MB) ' = $_. MemoryMB
  $Process. "' Hard drive (County) ' = $_. HardDisks.Length
  $process. "" Capacity HD (Total KB) "= '($_.) Hard drives | Measure-Object-CapacityKB of the sum). Sum '
  $process. "" Floppy drive (County) ' = $_. FloppyDrives.Length
  $process. "" CD drive (County) ' = $_. CDDrives.Length
  $process. "" NIC (County) ' = $_.NetworkAdapters.Length
  $process. "' NIC1 MAC Address" = $_.NetworkAdapters [0]. MacAdress
  $process. "' NIC1 Net Name ' = $_.NetworkAdapters [0]. NetworkName
  Write-Output $process
  }

  Any idea?

  THX

  Chakoe

  I get the same error when I type the name of the script file.

  You can try typing the name and then hit .

  Completion of the order should provide the full name, if the file is located in the folder where you are.

• How to start a local HTML5 file automatically as a link?

  Hi, I started to learn the DPS two weeks ago and had a lot of fun. But yesterday, I had a problem how to start a weblink autmaticially. The checkbox in the control panel overlay creator to enable auto-start does not clicking on it. And the default is inactive. The other boxes in the Panel do not react too. This problem would be an InDesign bug? Basically, what I tried to do... .i inserted a HTML5 local file as an weblinki l is shown on my iPad after synchronization. But I have to tap on it to show the HTML content - but I want to start automatically.

  Thanks for your comments. I hope you, someone could help me.
  Bert Bye

  Something is wrong with your Setup. Try removing the InDesign preferences. If this does not work, try to uninstall and reinstall the tools DPS.

• Run the script automatically when Windows goes into hibernation or wakes up?

  Hello

  I use the group policy feature in Windows XP to run scripts automatically when you open a session or logoff.

  But it is also possible to make a script run automatically, whenever a Windows-xp machine is about to Hibernate? And also when it wakes up from hibernation?

  The clues how to proceed?

  A funny hibernation is that if you put into hibernation and power then upwards and don't 'do' nothing - like press a key or move the mouse (just to sit and watch), in 300 seconds (5 minutes), XP will go back into Hibernation automatically.  Try it!

  XP does because after it comes out of Hibernation, if XP detects that there is nothing to 'do', he thinks he might be from Hibernation by accident and goes back to "sleep" and said "why you wake me up?

  That's why when people hibernate during the night and their machine turn on the morning he wakes up, they make their coffee or breakfast and return later to see that they have the power of their machine again.  If they think something is wrong, but things are working as expected.

  One way to fix this, is to use a third-party tool that uses the command line to simulate a mouse movement.   It is enough to prevent the rehibernating while you are on XP.

  To simulate a movement of the mouse as soon as your system is equipped with Hibernation, you will need to download the nircmd.exe file.

  There are many other utilities of vouchers on NirSoft main page:
  http://www.NirSoft.NET/

  To simulate the movement of the mouse, download the file nircmd.exe here

  http://www.NirSoft.NET/utils/nircmd2.html

  Put the nircmd.exe file in a folder which is somewhere in your path (c:\windows\system32, etc.) or consult the path in your command file. I put the nircmd.exe file in my c:\tools folder where I keep other things.

  If you do not have Hibernate enabled in your Power Options, tab hibernation, it will put your system on Stand-By instead of Hibernation.

  Create a batch file (I called mine hibernate.bat and put the nircmd.exe in my c:\tools folder) and put this line in your hibernate.bat file:

  off @echo
  Powrprof.dll, SetSuspendState c:\WINDOWS\system32\rundll32.exe Hibernate
  c:\tools\nircmd.exe 10 10 movecursor
  movecursor-10 c:\tools\nircmd.exe - 10

  Save the new file hibernate.bat on your desktop or somewhere, you can retain and double-click it to run the batch file.  When you are sure that it works very well, and then drag the new desktop icon to your quick launch area (to the right of the button start), change the icon, rename, etc, so it looks a bit better and then you can click on new quick launch when icon to call the file hibernate.bat.  Now just remember to use the hibernate.bat file (which could be on your desktop with a nice icon) instead of the menu to turn off the computer.

  The first command will put the system into hibernation, and then when XP comes from hibernation (even days later), run the following commands in the batch file.  These last two commands will simulate a slight mouse movement and who will deceive XP into thinking there is a reason to get out of hibernation and it will not go back to sleep.  Then when you come back from your coffee, your system is always waiting for you.

  If your case, your hibernate.bat might look something like:

  off @echo
  order 1 run before hibernation
  2 run before hibernation command
  order 3 to run before hibernation

  Powrprof.dll, SetSuspendState c:\WINDOWS\system32\rundll32.exe Hibernate

  order 4 to run when coming out of hibernation
  command 5 to run when coming out of hibernation
  order 6 to run when coming out of hibernation

• How can I run a script once the PC is booting and after I connect to my account?

  Hi all

  I'm using Vista, I want to run a script after that my PC is start and run script after I sign in to my account.

  Can someone tell me how I can get there?

  Thank you very much.

  SF

  Hello

  You can try the suggestions of the link to find out how to assign scripts at startup:

  Assign computer startup Scripts

  http://TechNet.Microsoft.com/en-us/library/cc770556.aspx

  Use startup, shutdown, logon, and Logoff Scripts

  http://TechNet.Microsoft.com/en-us/library/cc753404.aspx

  Reference: run a program automatically when Windows starts

  http://Windows.Microsoft.com/en-us/Windows-Vista/run-a-program-automatically-when-Windows-starts

  You can also post your query on the MSDN forum for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

• I can't understand how to start the calendar after the migration.

  I can't understand how to start the calendar of lighting. Documentation, said he will start automatically, but it doesn't.

  I reinstalled Thunderbird with the XPI in the folder with the exec install and now it works. Install documentation is poor.

• Start the host program automatically starts the RT program

  Hey guys,.

  I'm in a test phase and wanted to ask if it is possible to start the RTW program automatically, when I start my host VI. I don't have any executable for the moment because I am in the test phase, but I only want to support on "the button execute on the host VI and start (RT and HOST) screws.

  Is that possible or do I have to press two buttons to run?

  Kind regards

  Slev1n

  As Crossrulz notes, LabVIEW RT is essentially to another computer, does not Windows but rather running a real-time operating system (if on PharLap an Intel processor, often a version of Linux on FPGA hardware, I think).  It has always been necessary for these targets of RT to be 'on' and 'something', of course.  In the early days of LabVIEW Real-time, they sat often slowed down and you would use VI server to download and launch your RT code on them.  With the advent of the LabVIEW project (much) better to manage the objectives of the RT as, OR goes to a slightly different model where, as Crossrulz points out, the RT Code is supposed to be downloaded to the target and configured to start automatically running when the target is powered.

  In development Mode, there are provisions to download ("Deploy") and start the target RT and (theoretically), it should be possible to do it programmatically.  I tried to do this, but it was noticeably awkward that I have "gave in" and (except when in development Mode) practical to develop recommended follow-up of OR deploy and defined as starting on the target of RT.

  The idea, of course, is that if you know that the target RT is running when you start the host, the target should wait for the host to send a signal saying ' Hi, Target, are you ready to start working with me? (the target, of course, answered "Sure, let's get started...") »).  How to set up the first handshakes, it is up to you.

  Note that this model assumes / requires that until the host stops, it informs the RT target that she came out, allowing target RT back to its State "in expectation of the host."  A really simple way to do this, of course, is for the host to tell the target to reboot, which in fact boost its Startup Code (which is the target RT program).

  Bob Schor