As a router E1200 internal (not connected to the internet)?

Similar Questions

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• Router WRT54G does not connect to the internet during the passage of the modem cable to fios buildings

  I recently had need save money and cut off my cable service. Fortunately my building has a service that they lead in all apartments. It's just an ethernet wire that runs into my apt... (I pay for it with my mainentance). The router linksys has worked with the cable modem, but as soon as I plug the service buildings (i.e. Fios) it doesn't let me go on the internet. If I hang the service buildings until dirrectly on my Vista PC or Mac OS 10, it works fine but as soon as I set up the router I get an unable to connect to the internet message on Firefox, IE and Safari.    Ive updated the ware closes on it and Ive reset router noumerous times. IM at a loss.   Would appreciate any help.

  Probably, you will need to reconfigure your modem. Here is the procedure.

• My Airport Extreme is connected to a cable modem from Arris Surfboard, overtime, I try to set up it tells me that I am not connected to the Internet if I use a router TP - Link AC1750 can I connect is not my ISP. What I am doing wrong?

  I followed the instructions on how to set up my Airport Extreme, but he says that I am not connected to the internet.

  I can connect with a wireless router TP-Link is not a problem with my service provider. I want to connect with my Airport Extreme.

  What I am doing wrong?

  What exact model of the modem Arris do you have? Is your service provider Internet Cox, by chance?

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal

  All of a sudden not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Refer to the following articles. The steps of troubleshooting in these articles may help you resolve this problem.
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Router is not connecting to the internet.

  I can connect to my router both wired and wireless, but the router is not the internet. I use a cable modem with Comcast as my ISP.  When I plug the cable modem directly into my PC (as I do to post this message) I access the internet without problem. When I plug the cable on my router, I can't connect to the internet.  With my Wired internet router and my PC wire3lessly connected to my router, here is the result of my diagnosis:

  Microsoft Windows [Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\sgray>ipconfig/all

  Windows IP configuration

  Name of the host...: owner-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.co.comcast.net.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 00-24-D2-DF-9E-8A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : hsd1.co.comcast.net.
  Description...: Realtek RTL8191SE Wireless LAN 802.11n PC
  I E NIC
  Physical address.... : 00-24-D2-DF-9E-8A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::1c34:caaf:2ec6:9ce5% 12 (Preferred)
  IPv4 address: 192.168.1.101 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Saturday, February 27, 2010 13:48:05
  End of the lease...: Sunday, February 28, 2010 16:40:03
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 301999314
  DHCPv6 DUID customer...: 00-01-00-01-12-46-23-69-00-1E-33-F7-75-1D

  DNS servers...: 68.87.85.102
  68.87.69.150
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : hsd1.co.comcast.net.
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 00-1E-33-F7-75-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::b456:a41f:9a6e:4fc0% 11 (Preferred)
  IPv4 address...: 75.71.12.18 (Preferred)
  ... Subnet mask: 255.255.254.0.
  Lease obtained...: Saturday, 27 February 2010 16:40:07
  End of the lease...: Saturday, February 27, 2010 17:40:07
  ... Default gateway. : 75.71.12.1.
  DHCP server...: 68.87.66.13
  DHCPv6 IOOKING...: 234888755
  DHCPv6 DUID customer...: 00-01-00-01-12-46-23-69-00-1E-33-F7-75-1D

  DNS servers...: 68.87.85.102
  68.87.69.150
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap.hsd1.co.comcast.net. :

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.co.comcast.net.
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4 b 6: 1f96:b4b8:f3ed (preferred
  EXEs)
  Address IPv6 local link...: fe80::4b6:1f96:b4b8:f3ed % 13 (Preferred)
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter isatap. {34ACF225-4239-4274-989A-C35F258144E9}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : hsd1.co.comcast.net.
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:4 47 b: c12:4 b 47: c12 (Preferred)
  ... Default gateway. : 2002:c058:6301:c058:6301
  DNS servers...: 68.87.85.102
  68.87.69.150
  NetBIOS over TCP/IP...: disabled

  C:\Users\sgray>ipconfig/all

  Windows IP configuration

  Name of the host...: owner-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.co.comcast.net.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 00-24-D2-DF-9E-8A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : hsd1.co.comcast.net.
  Description...: Realtek RTL8191SE Wireless LAN 802.11n PC
  I E NIC
  Physical address.... : 00-24-D2-DF-9E-8A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::1c34:caaf:2ec6:9ce5% 12 (Preferred)
  IPv4 address: 192.168.1.101 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Saturday, February 27, 2010 13:48:05
  End of the lease...: Sunday, February 28, 2010 16:40:03
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 301999314
  DHCPv6 DUID customer...: 00-01-00-01-12-46-23-69-00-1E-33-F7-75-1D

  DNS servers...: 68.87.85.102
  68.87.69.150
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.co.comcast.net.
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 00-1E-33-F7-75-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap.hsd1.co.comcast.net. :

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {34ACF225-4239-4274-989A-C35F258144E9}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\sgray
  Microsoft Windows [Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\sgray>ping 192.168.1.1

  Ping 192.168.1.1 with 32 bytes of data:
  Reply from 192.168.1.1: bytes = 32 time = 3ms TTL = 64
  Reply from 192.168.1.1: bytes = 32 time = 1ms TTL = 64
  Reply from 192.168.1.1: bytes = 32 time = 2ms TTL = 64
  Reply from 192.168.1.1: bytes = 32 time = 1ms TTL = 64

  Ping statistics for 192.168.1.1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 1ms, Maximum = 3ms, average = 1ms

  C:\Users\sgray
  Microsoft Windows [Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\sgray>ARP - a

  Interface: 192.168.1.101 - 0xc
  Internet address physical address type
  192.168.1.1 00-16-b6-3f-57-5a dynamic
  192.168.1.105 00-25-b3-9f-a1-cb Dynamics
  192.168.1.255 ff-ff-ff-ff-ff-ff static
  224.0.0.22 01-00-5e-00-00-16 static
  224.0.0.252 01-00-5e-00-00-fc static
  224.0.1.60 01-00-5e-00-01-3c static
  239.255.255.250 01-00-5e-7f-ff-fa static
  255.255.255.255 ff-ff-ff-ff-ff-ff static

  C:\Users\sgray>Microsoft Windows [Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\sgray>netsh int ip show dns

  Configuration for interface 'Wireless Network Connection 2'
  DNS servers configured through DHCP: None
  Register with what suffix: elementary school only

  Configuration for interface "wireless network connection".
  DNS servers configured through DHCP: 68.87.85.102
  68.87.69.150
  Register with what suffix: elementary school only

  Configuration for interface "connection to the Local network.
  DNS servers configured through DHCP: 68.87.85.102
  68.87.69.150
  Register with what suffix: elementary school only

  Configuration for interface "Loopback Pseudo-Interface 1"
  Statically configured DNS servers: no
  Register with what suffix: elementary school only

  C:\Users\sgray>Microsoft Windows [Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  Can you tell me what I've misconfigured?

  Thank you!

  Well problem solved! Poster on this forum, and after receiving no help, I went to my local Best Buy and asked them to recommend a router that wasn't a Linksys.  I came home, plugged in my new Netgear Wireless-N-300 router, ran the installer and poof!  -I'm on the internet.  Linksys thanks for forcing me to buy a better router.

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• HP Deskjet 3510: Printer not connected to the Internet after new router purchase.

  After buying a new router, printer does not work. Is not connected to the Internet. I followed the instructions on how to connect but nothing I did helped. Wireless test results show the printer are currently configured with an automatic IP address, I don't know why or how this happened. Also shows that wireless and wireless is working and success to the configuration of the printer, just not connected to the Internet.

  Yes you will need a printer USB cable like this.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?ie=UTF8&QID=1458167924&SR=8-1&keywords=printer+USB

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• Cannot install iOS 9.3 on my iPad. Said that I'm not connected to the internet

  CCannot install iOS 9.3 on my iPad. Said that I'm not connected to the Internet. Router rebooted, says even I'm not connected.

  I have this same problem with my iPhone 5 s. hope someone can provide an answer.

• Error: Your device is not connected to the Internet.

  Hello

  I have a dash HID - B70 model and until last week it works fine. I used about 2 weeks ago and have had on energy saving mode after that. I tried to use it again a couple of days, and when I typed on the screen the unit remained in power save screen and showed a yellow above the clock error message: "your device is not connected to the Internet. Press to reconnect. "I hit this button and the unit tried to reconnect, but will still end up back in the same error message and the screen.
  I tried to push the reset button on the device, but I still see the same black screen and the clock with the error message once it restarts. I unplugged my wireless router and managed to get the device to show me the other wireless networks, then I plugged the router back in and reconnected (device showed that the connection was successful), but then he went immediately to the error screen.
  I can't the unit to go to the home menu at all, no matter what button I push, if unfortunately I can't even reset to factory settings to avoid the problem.

  Any advice on how to fix this? I do know not why it happened because I didn't have the routers or wireless providers, nor have I added all devices on my home network.

  Thanks in advance for your help.

  
  

• not connected to the internet deskjet 3520

  First day instaled deskjet 3520 printer all-in-one on the internet ok

  Two days does not connect to the internet.

  My internet connection is ok for my laptop and mobile

  Hi rubyjim,

  Thank you for the additional information.  I was very surprised to see the number of disconnects the printer has had in the last 24 hours.

  According to the information provided, I'm surmising that you stopped in step: evaluate the wireless network Test page according to the wireless network Test page you are correctly connected to your network.  In this step you ask to change the change to your wireless router, you please begin at this stage and test wireless printing?    If you are unable to print please continue with the remaining steps.  For ease of reference, I have included a list of the document printer does not maintain the wireless connection again.

• My Apple Watch does not OS 2.1 update. Keep saying at the end that cannot verify the update as long as it is not connected to the internet. The iStore even tried and they couldn't help.

  Nice day

  I need help with my Apple Watch. I tried the update to OS 2.1. I can't update as the right at the end of the download it says cannot verify the update as long as it is not connected to the internet. I made sure wifi was strong, batteries were in charge, I have even matched and re-paired the watch. I took it to the iStore so they couldn't get it updated and everything they said was sorry, you will have to wait the next update be released. Everyone dealing with this issue? What should do?

  Concerning

  Hello

  Because the update for you Apple Watch comes from your iphone is your iphone

  Running ios 9.2?

  If, then go to settings on iPhone reset network settings after reset entered your key wireless router.

  Also before doing this turn off your router for 30 seconds.

  Then repeat the update of watch.

  See you soon

  Brian

• Error message that I am not connected to the internet on some app

  Some of my programs will not update (automatic or manual) when I am online. Quicken, RoboForm, CCLeaner will be updated without problem. I was not able to install SP2, as well as updates of .NET Framework on my PC (XP Pro have). Suite of McAfee or Norton 360 will not update their definitions. I can open the Windows IE or Mozilla and go to the site, but I still see a message that I am not connected to the Internet. I have a broadband wireless router/w.

  Hi ricklnewman,

  ·        You receive an error message or error code when you try to install Service Pack or .net Framework?

  The antivirus installed on your computer can block windows update in order to install. Microsoft recommends not having more security or anti-virus software installed on your computer, as this could cause conflict of files.

  Follow the methods below:

  1 start your computer in aclean boot and try to install the updates. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  Make sure that you reset the computer in normal mode (you can see step 7)

  2. reset windows update components, you can see the below link for the same thing:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See the links below to obtain the latest service pack for Windows XP:

  How to obtain the latest Windows XP service pack: http://support.microsoft.com/kb/322389

  You can download and install the standalone product of the .net framework from the link below:

  Microsoft .NET Framework 2.0 Service Pack 2:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b2c0358-915B-4eb5-9b1d-10e506da9d0f&displaylang=en

  Microsoft .NET Framework 1.0 Service Pack 3:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6978d761-4a92-4106-a9bc-83e78d4abc5b&displaylang=en

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.