How to start and stop the APEX?

Similar Questions

• How to start and stop the video capture in a state machine

  Hello

  I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
  I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

  I hope you can help me, the VI is attached. Thank you!

  Hello

  First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

  Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

  And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

  Try now.

• How to start and stop the timer by using the keyboard.

  Hello, I would really like to help please, I have

  here to launch a program whereby I press a key

  which starts the timer and press another button to stop the timer, the

  delay is displayed and used to move an object on the phase on the delay dependant.

  Thank you

  Attach a listener of events on the stage of your film.

  stage... addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

  According to the http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/events/KeyboardEvent.html# KEY_DOWN

  1 if you want any key, so you don't need a key code.

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  2. If you want the same key to both use a Boolean value like this:

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == MyKey) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  }

  3. If you want two different keys

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == myStartKey) {}

  start my Countdown

  } Else if (event.keyCode == myStopKey) {}

  Cancel and reset my timer

  }

  }

  }

• Can you start and stop the glassfish server in JDeveloper 12 c and how?

  Mr President.

  Can you start and stop the glassfish server in JDeveloper 12 c and how?

  Concerning

  have you looked at

  http://www.Java-n-me.com/2014/02/GlassFish-extension-for-JDeveloper-12C-go-live.html

• Is it possible to start and stop the servers without using nodemanager?

  Is it possible to start and stop the servers without using nodemanager? If so, how?

  Hello

  Please follow the link below, it will be useful

  http://docs.Oracle.com/CD/E1322201/wls/docs81/ConsoleHelp/startstop.html#1243161_

  Concerning
  Fabian

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...

• How to unsubscribe and stop the writings of cash on the card?

  How to unsubscribe and stop the writings of cash on the card?

  
  

  This is an open forum, not a direct line to Adobe support... you will have to wait for a response

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• How to create services start and stop the script of automation for different servers

  Hi all
  
  I want to create a file bat for automation object, start and stop services
  I have some services in 1 server and a server in 2nd and some servers in 3rd.
  has you all know that I have to follow the sequence to start and stop services can all help me in creating .bat combining 3 servers fo start and collapses of the services.
  
  Thanks in advance
  
  Concerning
  SM

  the location of your batch file should not matter

• iOS 10 times to start and stop the music messed up

  I'm running a SE 64 GB iPhone with iOS 10. Many songs from my iTunes library has some moments of power, but after update, they are all mixed. Songs don't start or stop when they're supposed to, or they're going to start and stop at a random time, which is annoying. The same problem was in the beta, causing me to backup on iOS 9. I assumed that this bug would be fixed in the final version. All the solutions in addition to remove and re - download my library?

  Hello Carnage1215,

  Thank you for reaching out to the Community Support from Apple. I understand your music has had some problems and I want to help him. By the sounds of things that your songs start may be delayed or in the middle of the piece, is that correct?

  Before you make too much trouble shooting, it's a good idea to make a backup of your iPhone If you don't have it already. If you do not know how to save your phone from this article will guide you in the process: the backup of your iPhone, iPad and iPod touch

  Once you have made a backup, I would recommend to reset all the settings on your iPhone. This will ensure that all old data of a version of iOS parameter are removed and reset default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & paper painted and privacy, then you may need to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If you always use the same behavior after you restart your phone, please inform the community. We are all here to help.
  Best regards.

• How to start and stop a task with c#?

  Guys,

  I need a help. I'm trying to reproduce a task created using Meansument & Automation Explorer. The task is very simple create a channel of digital output and send the values 0 or 1 to enable and disable a relay in my board DAQmx.

  Kind regards

  Alexander has.

  I found the solution, add a new item in solution using Add new item choose component or and together the configurations such as a task type that you need. The issue will create a class for your task, this class has all the events to start and stop a task, and you can add your new methods if necessary.

  Thank you all.

  Alexandre Albuquerque

• Start and stop the ASM in a standalone environment

  Hello

  I installed just 11 GR 2 grid Infrastructure and ASM you have running.

  Q1. How I closed ASM correctly? So far I have

  stop the + ASM instance

  stop the listener

  However I always seem to have a number of processes that are running

  Grid1 6184 1 0 10:53?        19:00:00 /home/app/oracle/product/11.2.0/grid/bin/ohasd.bin restart

  Grid1 6338 1 0 10:54?        00:00:31 /home/app/oracle/product/11.2.0/grid/bin/oraagent.bin

  Grid1 6351 1 0 10:54?        00:00:00 /home/app/oracle/product/11.2.0/grid/bin/evmd.bin

  Grid1 6387 6351 0 10:54?        00:00:00 /home/app/oracle/product/11.2.0/grid/bin/evmlogger.bin o /home/app/oracle/product/11.2.0/grid/evm/log/evmlogger.info-l /home/app/oracle/product/11.2.0/grid/evm/log/evmlogger.log

  Grid1 6883 1 0 10:57?        00:00:05 /home/app/oracle/product/11.2.0/grid/bin/cssdagent

  Grid1 6897 1 0 10:57?        00:00:01 /home/app/oracle/product/11.2.0/grid/bin/ocssd.bin

  When I do = >

  Grid1 [+ ASM] > ASM srvctl status

  ASM is not running.

  Q2. What are the processes above, and how to close properly?

  Q3. What is the procedure for starting a ASM?

  any help appreciated,

  Jim

  
  

  Look for the command

  crsctl stop

• How to start and stop two parallel loops?

  Hello

  I want to control two parallel loops with different timing in a vi. Second, it means that to start the loop 1, roll 2, stop 1 or 2 restart loop 1...

  But if loop 1 turns that I can't start looping two then reverse.

  Can someone help me and show what is bad in my example?

  Thank you

  Christian

  Hello Christian,.

  The reason why you can't do what you want is actually quite simple.

  You have an external loop which is 'on' the two inner loops.

  So when you stop one of the inner loops, the outer loop will still be in the same iteration until the other inner loop ends - stop the other inner loop.

  You can see very easily if you explore the outer loop iteration count - only when both loops internal, it is incerment.

  So, to do what you want, you need to make them independent - you need two external loops.

  Check my attachtment, see if that's what you need.

  Hope this helps,

  Paulo

• Re installation Dell is 920 printer says spooler service must be started. How to start and get the printer to work?

  Windows XP... Dell desktop computer and printer

  Although Christopher has correctly described a way to start the Printer Spooler service, chances are that he won't stop even once until you remove the problem that caused its judgment in the first place.

  Often, but not always, the print spooler stops because there is a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Starting and stopping the process GG

  GG admin guide I understand we can start/stop the GG (excerpt, pump, Replicat) procedures through shell scripts, and it is mentioned that it can be invoked from a script to start/stop/go. Are there restrictions on these operations?
  
  We intend to implement the process of stop/start GG in our application scenario where you need to update the source DB (and thus the target DB also) through a batch process at regular intervals (once a week, can also be less frequent). The plan is the first above mentioned stop GG process, update source DB with the latest data, transfer data to target the DB using exp/imp, restart GG treats using the SNA option after. All these steps are automated.
  
  From the tests above of initial works but don't know if GG power operation is strong enough to manage the scenarios on a regular basis and will work. Are there known issues with these operations such as disorders while implementation power which makes it unfit for use through scripts like the one mentioned above.
  
  Enjoy all the entries in the present.
  
  Thank you

  The process can be run from the command line and are just as reliable as any other executable UNIX regarding commissioning correctly if all the prerequisites are met.

  To launch the Manager from the command line
  To run the management of the control of the operating system interface, use the following syntax.
  Bishop paramfile [ reportfile]

  On the source and target systems, publishes one of the following sets of commands
  in the process, you are a beginner. Run the Oracle programs
  Directory of GoldenGate.
  extract paramfile .prm reportfile .rpt [Pei ]
  or...
  replicat paramfile .prm reportfile .rpt

  You can automate the monitoring, and it's an exercise as any monitoring process (for example, the tail of the alerts log and grep for errors ORA, logs of web server of grep, etc..). You can see extract and replicat upstairs / ongoing run, so you can also use Director (Management Pack).

• AS3 video start and stop the question.

  Hello

  I am new to AS3 and I'm trying to figure out how to stop a clip to play on mouse click. For now, I created a movieclip that plays when the user clicks on it, but now I want to be able to stop the movieclip if clicked again.
  At the moment, I have the following code:

  Stop();
  bigTree_mc.addEventListener (MouseEvent.CLICK, onClickplayAnimation);

  function onClickplayAnimation(event:MouseEvent):void
  {
  bigTree_mc.play ();
  }

  The tree animation plays very well, but I want to be able to stop it if the user click on it again.

  Any help would be appreciated!

  Thank you!

  Try...

  Stop();

  var isPlaying:Boolean = false;

  bigTree_mc.addEventListener (MouseEvent.CLICK, onClickplayAnimation);

  function onClickplayAnimation(event:MouseEvent):void
  {
  {if (isPlaying)}

  bigTree_mc.stop ();

  } else {}

  bigTree_mc.play ();
  }

  isPlaying =! isPlaying;

  }