Re installation Dell is 920 printer says spooler service must be started. How to start and get the printer to work?
Windows XP... Dell desktop computer and printer
Although Christopher has correctly described a way to start the Printer Spooler service, chances are that he won't stop even once until you remove the problem that caused its judgment in the first place.
Often, but not always, the print spooler stops because there is a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpyware
Do not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Use of the special procedure for printers Lexmark described below and follow in its first Article. If still no joy, use the alternative method that is linked below.
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
output
B. clean the old printer drivers and install the latest drivers by using the directions in One Article.
A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.
Open a command prompt window (start > run > cmd > OK)
Type the following in the black command prompt window and press enter
dependent on the spooler of sc config = RPCSS
output
Note that there is no space before the =
If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.
Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
Tags: Windows
Similar Questions
-
Error 1068 print spooler service does not start
original title: PROBLEM WIT THE PRINT SPOOLER
I HAVE A SYSTEM TO BOOT WINDOWS VISTA AND I GOT THE PRINTER LEXMARK X 1130 INSTALLED.
I BOUGHT THE LEXMARK INTERPRET S405, AND I REMOVED ALL OTHER PRINTER DRIVERS AND INSTALL THE DRIVER FOR THE S405, BUT THE I STARTED HAVING A PROBLEM THE THE PRINTER SPOOLER DID NOT WANT TO INSTALL THE NEW PRINTER AND ME GIVES ERROR 1068THE SPOOLER SERVICE WILL NOT START. I CONTACTED LEXMARK TECHNOLOGY CENTER AND THE TECHNICIAN TRIED TO HELP ME, BUT NO LUCK. Help, please
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsThe tutorial consists of 3 parts:
Step 1:
Check the hardware
Step 2: Use a troubleshooting tool
Step 3: update
driversApplication Microsoft Support Fix It:
http://support.Microsoft.com/mats/printing_problems/en-usTry this Windows
Tutorials:
It consists of many themes that you can click and read the tutorials.
There also an Fix It application
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsHere is the main link with: Support for Windows
Technical problems of Vista and troubleshooting - printing
http://support.Microsoft.com/ph/11732#tab11 -
the spooler service does not start how
When in the properties of the spooler service I did start one here does not and shows me the message error 1503
Comment do car because of this I cannot use my printer: scan or print
Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)
http://answers.Microsoft.com/fr-FR/windowslive/Forum?tab=unanswered
http://support.Microsoft.com/common/international.aspx
-
We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8. We have installed RPM utilities to manage the installation. The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk. Here's a summary of what we have done so far, and to what extent we got.
First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel. Then we installed LabView 8.6.1. Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation. To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:
http://decibel.NI.com/content/docs/doc-4511
We were then able to compile and install the kernel nation module thanks to:
. / configure
do
make installlsmod said that nation has been properly installed. Then we ran the installer for DAQmx 8.0.1 by:
. / INSTALL - nodeps
To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion. Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:
Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...
Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
installed.Pre Installation...
Preparing... ########################################### [100%]
1:nitimingi ########################################### [ 4%]
2:nipalki ########################################### [ 7%]
3:nipali ########################################### [ 11%]
RC0.d directory not found, startup script is not accredited with init levels.
4:labview80 - rte # [14%]
5:ni653x ########################################### [ 18%]
6:nicdigi ########################################### [ 21%]
7:nidaqmxcapiexmp # [25%]
8:nidaqmxcapihelp # [29%]
9:nidaqmxcapii # [32%]
LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
10:nidaqmxcfgi # [36%]
11:nidaqmxef # [39%]
12:nidaqmxhelp # [43%]
13:nidaqmxinfi # [46%]
14:nidaqmxswitch # [50%]
15:nidimi ########################################### [ 54%]
16:nidsai ########################################### [ 57%]
17:nimdbgi ########################################### [ 61%]
18:nimioi ########################################### [ 64%]
19:nimru2i ########################################### [ 68%]
20:nimxdfi ########################################### [ 71%]
21:nimxpi ########################################### [ 75%]
22:nimxs ########################################### [ 79%]
RC0.d directory not found, startup script is not accredited with init levels.
23:niorbi ########################################### [ 82%]
24:nipxirmi ########################################### [ 86%]
25:nirpci ########################################### [ 89%]
26:niscarabmm # [93%]
27:niscxi ########################################### [ 96%]
28:nistci ########################################### [100%]After Installation...
At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:
update of RC - a boot nipple
update of RC - a bunch of nipxirmu
update of RC - a bunch of mxssvr
update of RC - a bunch of nisvcloc
update of RC - a bunch of nidevlduWhen the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk. lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present. modprobe-l shows that only nation and nipalk are available.
So we have several questions:
1. we install drivers in the correct order? Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?
2. What kernel modules should be loaded for this equipment run? How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk? Are there others?
3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView? Are there additional kernel modules related to the support of LabView?
4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?
I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system. Is there other information that we can provide that would be useful? Thanks for any help or suggestions you can offer.
Craig
Hey Craig,.
Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit. User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.
NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card. Most of these kernel modules have not been brought to support 64-bit Linux. Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux. Unfortunately, you need all the modules to use your hardware.
I hope that answers your question.
Shawn Bohrer
National Instruments
-
Original title: "Prop Res DLL not loaded".
Try printing the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL not loaded" How can I load it? Typically get this message when I print review copy. My system is Windows XP.32 bits
Hi Robert,.
I would be grateful if you could answer the following questions:
1. did you of recent changes made to your computer?
2. which antivirus app do you use?
Here are a few troubleshooting steps that you can try to solve this problem.
Method 1: Let's uninstall and reinstall the Lexmark X 1185 printer drivers.
To uninstall the printer software, see the following link.
http://support.Microsoft.com/kb/307895
Restart the computer, visit the following link and install the printer drivers.
If the method above does not work, follow the steps in the next method.
Method 2: Error Message When you try to print or save a document in OneNote 2007 or in Word 2007: "Prop Res DLL not loading" or "Cannot load Library DLBAPRP.dll"
http://support.Microsoft.com/kb/918730
Note: suggested above steps are applied to your scenario as well.
If you have additional problems, please reply to this post and we will be happy to help you further.
-
Log name: SystemSource: Service Control ManagerDate: 17/07/2011-21:12:53Event ID: 7000Task category: noLevel: errorKeywords: ClassicUser: n/aComputer: ivan-PCDescription:The BCM42RLY service failed to start due to the following error:The system cannot find the specified file.The event XML:
7000 0 2 0 0 0 x 80000000000000 203523 System Ivan-PC BCM42RLY%%d Kooriginal title: can someone please help...Hello
1. you are using a Dell computer?
2. What is the model number of your computer?
3. don't you make changes to your computer before the problem?BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.
-
Windows mail - error and the same letter over and over again.
When I open Windows mail, I start to get the mail and I get it about 474 243. And then an error saying Windows mail will be closed because of an error. And I start it again and I get the SAME email AGAIN, and again, it stops somewhere and closes.
Anyone know what could be the problem?You can try to set up a new e-mail account and use the exact settings of the account that you have now. This way, you will have a copy of the same account. Then see if it has the same problem. If it works and is not old, and then see if the old man works after this and remove one of them, if you do not receive the messages in doubles.
If the new copy of account has the same problem, then it's a stuck message and your courier company should fix this.
Steve
-
Hello
I just had to update my laptop Azus Windows 8. I reinstall all my programs. All my financial records are Open Office, so I need to reinstall the program. The download starts and gets to about 50 MB before the zone State says down load has failed. This happens no matter if I choose run or save. I lowered my security settings for IE but still not completely download. I downloaded Open Office earlier this year with no problems. It must be something that I am missing. Please help I need to do my job. Thank you
Do you have any error messages at all when you try to download?
What utility Antivirus you have installed? Have you tried to disable it temporarily and and see if they work?
Have you tried to save the download to a different location on the hard drive such as the desktop?
Have you tried using another user account?
What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.
Press the Windows key + X
Click prompt (Admin)
At the command prompt, type the following command, press ENTER.
ipconfig/release
then
ipconfig/renew
then
ipconfig/flushdns
leave the command prompt
Press the Windows key + R, type: folder
Press enter
Delete the contents of the temp folder
Restart the computer and try to download again.
If the problem persists, try resetting your router if you are connected to one.
Turn off the router, unplug it, wait 10 minutes
Plug it in again, power up once again
Reconnect the Ethernet cable
Try to download again
You can try to download free Office instead which can OO.org Open files.
-
Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?
first of all uninstall cc on your computer.
Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html
Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe
If that translates into the same initialization error:
start at the top and work your way down to apply applicable patches until your problem is solved.
If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
If your error is:
"Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.
first of all, rename folder OOBE OOBE.old.
to find the OOBE:
Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE
Win 32 bit OS: Program Files \Common Files\Adobe\OOBE
Mac os: HD > library > application support of > adobe > caps
Mac os: USER > library > application support of > adobe > OOB
If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
If you use an installation dvd:
Copy the contents of the drive in a desktop folder and install from this directory.
If you are using a mac:
1. try to create a new user account in Mac with administrator privileges.
2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the
3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.
4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.
5 restart the installation.
If everything is applicable above fails, check your Setup logs:
http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html
-
I volunteer for installation of the Government in New Orleans. I'm helping recommendations on equipment and software. Their editing computer cannot be connected to the Internet. How to buy and receive the software and updates?
Please see this link in the topic "successful."
Creative cloud using Enterprise | Applications and updates
You can use managed delivery of applications for the following:
- If you need to exercise strict control over the applications installed on client computers.
- If end-users have administrator privileges on the computer.
- To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
- If there is no Internet access on client computers.
-
I am installing 13 items and get the installer could not initialize error... on mac...
Please follow the steps in Photoshop elements 13 will not install & check if it helps you.
Concerning
Stéphane
-
Dell AIO 920 printer/scanner device does not print
I have a freedom to sell that works under Windows 7. I have a Dell AIO printer/Scanner.
The printer does not print. IT says 'ready' on the status line.
Any help please?(1) download and install the latest driver for dell reference story
See the following link
http://www.Dell.com/support/drivers/us/en/19/product/Dell-920
(2) see below link for troubleshooting
http://www.Dell.com/support/troubleshooting/us/en/19/product/Dell-920
(3) solve printer problems, see link below
(4) solve printer problems, see link below
http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems
(5) troubleshooting hardware probblems, see link below
http://Windows.Microsoft.com/is-is/Windows7/open-the-hardware-and-devices-Troubleshooter
(6) you must enable the lists of services that is used for HARDWARE, to do this
Start RUN type SERVICES. Enter MSCfind the names of services and right-click, then choose
Properties, like AUTOMATIC start mode
(a) SERVICE of WWW.MOTOROLA.COM/BLUETOOTHSUPPORT
(b) HOST of DEVICE HUMANINTERFACE
(c) PLUG AND
(d) PORTABLE DEVICE ENUMERATOR SERVICE
(e) SPOOLER PRINT (for printers)
(f) DETECTION MATERIAL CORE(g) UPnp DEVIICE HOST
(h) WINDOWS DRIVER FOUNDATION
(i) ACQUISITION of IMAGE WINDOWS(j) INSTALLER of MODULES WINDOWS
(k) ASSISTANT SERVICE COMPATIBILITY PROGRAMrestart pc ypur
Guilbert
-
PRINT SPOOLER service does not START, ERROR: 1058 - Service cannot be started.
OS = XP SP3
Laptop = Dell D500
As directed by Microsoft and Dell knowledge base, I deleted the printer spools and pilot; and edited my registry, remove the drivers and monitors printing. I also followed a process dictated by the KB919750, nothing helped.
I am unable to add printers, because of this problem.
I keep getting the same error messages...
"Cannot start service on Local computer print spooler.
"ERROR 1058: cannot start Service.
OS = XP SP3
Laptop = Dell D500
As directed by Microsoft and Dell knowledge base, I deleted the printer spools and pilot; and edited my registry, remove the drivers and monitors printing. I also followed a process dictated by the KB919750, nothing helped.
I am unable to add printers, because of this problem.
I keep getting the same error messages...
"Cannot start service on Local computer print spooler.
"ERROR 1058: cannot start Service.
PML: thank you. Your suggestion to confirm that the device was also PERMITTED did the trick! I can now and have ADDED a printer. Thanks again!
-
I have to keep repairing my printer spooler service whenever I start
I have a XP Home system and a Brother DCP-130 c printer. I closed all night and the next day when I need to print, I told myself I need to intall printer and that the Printer Spooler service is not operated. I fix this with Microsoft fixit, but after that I have stop and restart almost every day I have to fix it again. Why this keep happening?
Derek
The problem disappeared?
-
Have a new mac book pro 13 "computer laptop. have a dell 1250c laser printer. He used to work with my 17 "pro, but not now. Software OS X 10.9.3 (13D 65)Dell does not provide a new driver for my new mac book pro 13 "In addition, it will show 3 pages of device settings - ea time I try to print by pressing the buttons on my Dell, but not the page I want to print. Help?
Best of this post in the Forum of devices/printers, here:
http://en.community.Dell.com/forums/3528.aspx
Bev.
Maybe you are looking for
-
tag rendered height depends on the location of the file
I already posted this question to the stack overflow, but in my opinion, it is best to post it here because I don't have this strange behavior in Firefox 11.0 (I have not tried other versions of Firefox). Here goes: I have two files with the same con
-
A program called Windows Antidanger Center will not let me run google chrome
a program called antidanger windows will not let me run google chrome and divx and continues to appear even when I refuse access, is anyway to get rid of him?
-
Error code: Easyshare 1935x17x2103064800x download problem
I have 32 bit VISTA compatible Easyshare. The error code I get (1935x17x2103064800x) no matter if I try to install an Easyshare disc or download it (I have no earlier versions of Easyshare on this computer) sends me a Kodak self-service site that sa
-
* Original title: Unknown Publisher for most of the Microsoft Services such as the window update Recently, my Toshiba hard drive failed on my Satellite L500. I replaced it with a new 500 GB hard drive. And then used my Toshiba restore to out of the
-
in Vista, I could pass between English and Russian with button EN or RU. I have the new windows 7 Home Edition and discovered that it is only available in Windows 7 Enterprise and Ultimate. update is available to resolve this problem?