How to stop or remove perlinnoise?

.. then I can add the following image. and use an alpha tween to show. If you test this, (just rename images by image names I use and export to as3 library). You can see that the perlinnoise is continuously existing in the background. Simplicity and test, I'm tweening only two halves of an image that I'm trying, but actually I finally many tween parties (copyPixels) of the original image.

I'm trying to get this to work because Tween does not work when you try Tween than an index of an array (so I can time differently each index), even if I name each index item in the table.

Interestingly, enough when I use the loop and set the property of the Rectangle x new ix the bit of code below works to stop the perlin noise. But as soon as I remove the loop, the flag.fillRect (flag.rect, 0); does not work.

If (newMC2.alpha == 1) {}

found = true;//stage.removeChildAt(0);stage.removeChild(flag);ary.splice(0);

break loop;

break scloop;

break noise;

flag.fillRect (flag.rect, 0);

} //END if

Here is my code:

import flash.display. *;
import flash.events.Event;
import flash.events.TimerEvent;
import flash.geom.Rectangle;
to import flash.geom.Point;
import flash.utils.Timer;
import flash.utils.setTimeout;
Import fl.transitions.Tween;
Import fl.transitions.TweenEvent;
Fl.transitions.easing import. *;
ary var: Array = [0,14,28,42,56,70,84,98,112,126,140,154,168,182,196,210,224,238,252,266,280,294,308,322,3 36,350,364,378,392,406,420,434,448,462,476,490,504,518,532,546,560,574,588,602,604];
var pW:uint = 301;
var xyPnt:Point = new Point (0,0);
var rippleSz:uint = 160;
var scalex:Number = 50;
var ScaleY: number = 100;
var: channels: uint = BitmapDataChannel.BLUE;
var chX:uint = channels; var chY:uint = channels;
var oct:uint = 1;
var dmode:String = DisplacementMapFilterMode.COLOR;
var color: uint = 0xFFFFFFFF;
var dalpha:Number = 1;
var fW:uint = 603; var fH:uint = 214;
var fData:BitmapData = new BitmapData (fW, fH); perlinNoise applied to this
var flagBmp:Bitmap = new Bitmap (fData);
var: timer = new Timer (10000,4);
timer.addEventListener (TimerEvent.TIMER, vPic);
Timer.Start ();
addChild (flagBmp); Adds the container bitmap to the stage object
var lwyData0:BitmapData = new lawyers_sprite;
var lkeData1:BitmapData = new lake_sprite;
var dckData2:BitmapData = new duck_sprite;
var ctyData3:BitmapData = new cotie_sprite;
var fRect:Rectangle = new Rectangle (0,0,fW,fH);
var tempFDataX:BitmapData = new BitmapData (fW, fH);
var img1:BitmapData = lwyData0;
var nPic:BitmapData = lkeData1;

tempFDataX.copyPixels (img1, fRect, focus()) new;
var: matrix new matrix());
var fData2:BitmapData = new BitmapData (fW, fH, false);
fData2.draw (tempFDataX, matrix, null, null, fRect, true);
var flag: Bitmap = new Bitmap (fData2);
addChild (flag);
function vPic(event:Event):void {}
var ct:uint = timer.currentCount;
switch (ct) {}
case 0:break;
case 1:
img1 = lwyData0;
nPic = lkeData1; break;

case 2:
img1 = lkeData1;
nPic = dckData2; break;

case 3:
img1 = dckData2;
nPic = ctyData3; break;

case 4:
img1 = ctyData3;
nPic = lwyData0; Timer.Reset (); Timer.Start (); break;

by default:
img1 = lwyData0;
nPic = lkeData1; break;
}
tempFDataX.copyPixels (img1, fRect, focus()) new;
var: matrix new matrix());
var fData2:BitmapData = new BitmapData (fW, fH);
fData2.draw (tempFDataX, matrix, null, null, fRect, true);
var flag: Bitmap = new Bitmap (fData2);
addChild (flag);
var found: Boolean = new Boolean();
flagBmp.blendMode = BlendMode.HARDLIGHT;
flagBmp.alpha =. 3;

stage.addEventListener (Event.ENTER_FRAME, wind);

rippleSz = 160;
var rippleSz2:Number = 160;
var offset0:Point = new Point (0,0);
ScaleX = 50;
ScaleY = 100;

function wind(event:Event):void {}
offset0.y-=. 5;
offset0.x-= 5;
rippleSz2-= 1;

noise: if (rippleSz2 > 100) {}
fData.perlinNoise(rippleSz2,rippleSz,oct,1,true,true,5,false,[offset0]);
var replaceData:DisplacementMapFilter = new DisplacementMapFilter(fData,xyPnt,chX,chY,scalex,scaley,dmode,color,dalpha);
var replaceDataAry:Array = new Array (ReplaceData());
Flag.filters = replaceDataAry;
Flag.Smoothing = true;
break noise;
}
else {}
scloop: if ((scalex < = 50) & & (scaley < = 100) & & (found == false)) {}
If ((scalex > = 0) & & (scaley > = 0)) {}
offset0.y-=. 5;
offset0.x-= 5;
rippleSz2 +=. 5;
ScaleX-= 1;
ScaleY = 2;
fData.perlinNoise(rippleSz2,rippleSz,oct,1,true,true,5,false,[offset0]);
var replaceData2:DisplacementMapFilter = new DisplacementMapFilter(fData,xyPnt,chX,chY,scalex,scaley,dmode,color,dalpha);
var replaceDataAry2:Array = new Array (replaceData2);
Flag.filters = replaceDataAry2;
Flag.Smoothing = true;
flag.fillRect (flag.rect, 0);
break scloop;
}
else {}
trace (CT);
var StageObj:Stage = stage;
loop: for each {(ix:uint var in ary)
var newBmd:BitmapData = new BitmapData (pW, fH);
newBmd.copyPixels (nPic, new Rectangle (0,0,pW,fH), xyPnt, null, null, false);
var pix: Bitmap = new Bitmap (newBmd);
PIX.x = 0;
PIX.Alpha =. 1;
var newMC:MovieClip = new MovieClip();
stage.addChild (newMC);
newMC.x = 0;
newMC.alpha =. 1;
newMC.addChild (pix);

var newBmd2:BitmapData = new BitmapData (pW, fH);
newBmd2.copyPixels (nPic, new Rectangle (302,0,pW,fH), xyPnt, null, null, false);
var pix2:Bitmap = new Bitmap (newBmd2);
Pix2.x = 0;
PIX.Alpha =. 1;
var newMC2:MovieClip = new MovieClip();
stage.addChild (newMC2);
newMC2.x = 301;
newMC2.alpha =. 1;
newMC2.addChild (pix2);

var twTimer:Timer = new Timer (2000,44); ARY.length is 45
twTimer.addEventListener (TimerEvent.TIMER, doTween);
twTimer.start ();

var twn:Tween = new Tween(newMC,"alpha",Strong.easeIn,.1,1,1.5,true);
TWN. Stop();
setTimeout (twn.start, 1000);
var twn2:Tween = new Tween(newMC,"alpha",Strong.easeIn,.1,1,1.5,true);
twn2. Stop();
setTimeout (twn2.start, 3000);

/ * If (newMC2.alpha == 1) {}
found = true;//stage.removeChildAt(0);stage.removeChild(flag);ary.splice(0);
break loop;
break scloop;
break noise;
flag.fillRect (flag.rect, 0);
} //END if
} //END loop * /.

Tween = new Tween (newMC, "y", Strong.easeOut,-214, 0, 1.5, true);
} Else //END
} //END if
} Else //END
} //END wind
} //END vPic

OR we know math to move each pixel, so that the waves of the whole image as a flag, without perllinnoise, so that I can start and stop the ripple when you want.

Set flag.filters to an array of length zero.

Tags: Adobe Animate

Similar Questions

3 Windows XP, how to stop "software removal malware tool-Feb 2012 (KB890830) to reinstall, & on & above?

3 Windows XP, how do I stop the "software malware removal tool-Feb 2012 (KB 890830) to reinstall more & on & above?

Hello MickeyWright,

You can try to reset components to update Windows from the following link and check if the problem still persists.

How to reset the Windows Update components?

http://support.Microsoft.com/kb/971058

Let us know if that helps.

How to stop the removal of the pixels outside the canvas area?

When I develop a selection or transfer and image/object autour then deselect the edges/parts that end up falling outside the area of the canvas are deleted. How can I stop this? When I'm going to move the layer or resize I can't because parts never landed outside the canvas area have been removed. It's Photoshop CS6, I never had this problem with CS5.

Activate the crop tool and turn off [] Delete cropped Pixels in the area options.

-Christmas

How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

Orifginal title: Aggrevation

How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

Hi ElginCarelock,

You can try to restart the computer and check.

Uninstall all USB device manager entries

a. Click Start and typedevmgmt.msc and press ENTER.

b. expand Bus USB controllers.

Note: You will need to scroll down to find this point.

c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

d. Repeat steps above for each controller USB is listed under Bus USB controllers.

e. restart the computer and check.

Hope this information is useful.

How to stop Motion 5 to rename the items?

How to stop Motion 5 to rename the items?

For example, I have a folder named "Box" inside this folder are 5 additional folders and in these files are text and circles/squares etc. Once I have copy and insert the name of the parent is "copy of zone 1", the names of children is now "copy print"1", 1 paper copy etc, and children are also name with a copy to the front and a number in the back. If you like 50 items in the folder, you need to go to each name and remove the copy, then move to the back of the name and remove the number. That would make 100 corrections. If you duplicated "Box" 10 times that would be 500 times I have to delete the copies and 500 times I have to delete the number. I am an organized person and I do not confuse names like "copy paper 27.

I only want that this

'Copy of movement case 12-11'

to look like this

"Movement block 12.

It takes a lot of time to remove the copy at the front and out the number on the back of name.

In Autodesk Maya 3D they do something similar, it turns 'apples' in 'pasted apples 1 ", so created a script that deletes all the text"stuck"in the name and number on the back the text name.

I think it's a pretty silly renaming procedure. Adds text to the front and rear. Makes me wonder where they got their education.

David

David, for starters I can't duplicate what you describe, where things are added to the front and back automatically, you may need to clarify some things. Looks like what you're saying is you have Group in movement named "Box" If you copy and paste the group, the name of the new group is "copy of copy of box? Or you add 'Copy from' before the name of the Group at some point before making a copy/duplicate of the Group?

Movement, like the Finder and many other applications, will add an object in double with 'copy', then add numbers after that. The structure of renaming seems simple enough. For example:

1. start by a group of layers / named 'box '.

2. copy and paste "Box" will give you "Box copy.

3 copy and paste 'Copy of box' will give you «box copy 1"»

My tests, if "copy" part of the name at the end, only the numbers will be added and increase gradually. I think that if you get something like "Box copy copy" you have added manually "copy" at the beginning of the name, which is the only way that I could reproduce what you describe. If you don't want to have to remove 'copy' twice, don't start a layer name or "Exemplary" program group. Motion is probably not check if the copy is at the beginning, at the end.

For what is a way of not having a copy or a number added to the end, it is not a. It is probably a requirement of how the movement initially creates duplicates of layers/groups and make sure, that it is not destroy the existing layers. This is probably the best. This is similar to the creation of the records or documents in the Finder, just moving, you can go back and rename multiple items with the same name once they are created. If you are uncomfortable with writing scripts, sounds like you are, maybe it's a good option, otherwise you will have to do some manual changes as you go.

How to stop the pop-up tip help Mozilla

If the update added a few features which I love but a serious makes me angry because I don't know how to stop it. Mozilla keeps offering suggestions on how use the web with annoying help tip popups blocking my screen. He says things like "press Ctrl + W to close tabs. It is faster' and ' to start private browsing...'

It is SO annoying and I can't find a way to stop it. This isn't the first time I used Firefox and I don't need to be told how to use it as if it was my first time. Help, please... I don't want to go to Chrome. x.x

It is being run by Mozilla experience. That's because at some point you have installed the test pilot add-on or used a beta version of Firefox and in doing so registered to help Mozilla to test the new features.

If you want to remove it, feel free to uninstall the test pilot and the add-on experience. Disable or remove modules

Reopened FF & found 2 strips not 20 + both for adding toolbars, how to stop?

I closed and seq. Reopened an hour later - it my 20 + tabs disappeared - 2 new ones in their place. I was asked to install a Yahoo toolbar and the other wanted to my good to install a toolbar of Downloader YouTube (CDA).
I don't want either and only had not asked either. (I had downloaded a stand alone YouTube Downloader program - but nowhere he said I would get to the toolbars with.)

(In this case, I found an option to "Restore last session" - and fortunately it brought back my tabs)

I looked in the Extensions and found one for CDA Toolbar - fortunately disabled. I removed it completely.
This will stop my tabs disappear again? And I can still use the CDA program without the toolbar?
I have nothing to allow Yahoo toolbar in so I have no idea why it turns up - how to stop it deleting all my tabs?

Hello

Glad to know that you were able to restore your session on the Forelegs. Usually, this occurs if a program that you have installed on your computer tries to install the toolbars and plugins for Firefox. Please uncheck all the options for the facilities of the toolbar, the next time that you install the software, or at least make a note of these programs so that you know what to uninstall if necessary.

Come to the toolbar for a YEAR, I found this reference on the Internet, which mentions that the YouTubeDownloader program installs a plugin in the browser - CDA toolbar. You should be able to use the CDA program without the plugin also. I suggest that you keep the plugin disabled in Firefox mode and it will not interfere with your use.

And if you have chosen to uninstall the plugin, you can follow the steps detailed below.

To uninstall a possibly unwanted extension, please proceed as follows:
1. In the Firefox Firefox window click on the top left and select Add-onsor, if the Firefox button is not displayed, click the Tools menu, and then click Add-ons.
2. Once the add-on Manager has opened in a new tab, click the Extensions button on the left side of the window.
3. You should now see a list of your extensions installed on the right side and buttons on the right side of each extension.
4. To remove an extension of Firefox, simply click on the Remove button. You should see a message that informs you about the deletion of the add-on.
5. Note that some modules require a restart of Firefox to make it disappear completely. To perform a restart of Firefox after removal of add-on, click restart now in the message.
You can find more information about uninstalling extensions in the following articles:

Disable or remove modules

Remove a toolbar that has supported your Firefox or the homepage search

When I answer a mail, or want to send an e-mail, a new empty email opens. It started a few weeks ago. No idea how to stop what is happening. Help, please.

I use an iMac with El Capitan 10.11.3 in my email software, a problem started a few weeks ago. When I answer a mail, or want to send an e-mail, a new empty email opens. No idea how to stop what is happening.

E-mail programs must close and restart. Empty mails are stored under Concepts and should be deleted.

Then a mail can be answered, but with the 2nd mail, the same thing happens again, and an empty mailpage appears again.

Very annoying. Help, please.

Please remove "Report", also known as the 'Trusteer Endpoint Protection', following the instructions on this page.

Back up all data before making any changes.

Foxfire runs when "Pac Man" plays continuously. How to stop it?

It started this morning for the first time. He plays when Foxfire is activated, not with IExplorer. Foxfire runs when "Pac Man" plays continuously. How to stop it?

This has happened

Each time Firefox opened

NA

User Agent

Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 4.0; .NET CLR 2.0.50727; WWTClient2 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Removal of CoolPreviews 3.1 seems to have solved my problem.

Satellite L500/01U: How to stop the camera setting will appear on the desktop

Whenever I start, there is a graph of type small coloumn with icons of the camera, with TOSHIBA on top.
That's the picture/video, settings, effect, face recognition.
How to stop what appears, as it's annoying the heck out of me, because it is covered permanently on my Web pages.
I can remove it with a right click, but I can't say how to stop appearing on start up.

Hello

I agree with Akuma.
To cancel the camera automatically load software, the simplest method is to disable in msconfig.
In RUN, type msconfig. Go to the Startup tab and disable the camera software.

That s it ;)

Welcome them

How can I reset remove bios of the G4 Core 2 Due Series Pavilion

Please tell me how I can reset remove bios of the Pavilion G4, I forgot the BIOS password.

My Code stop it is 70886016

Thank you.

Dear customer,

Welcome and thanks for posting your query on the Forum from the HP Support

Looks like you are looking for a password here, we will surely help you with this problem

Please try this password = 65784038

Steps to follow:

1. use the posted above unlock code to access the BIOS

2 disable all passwords that are enabled

3. If the request for current password - enter the unlock code

4. for the new password, simply press the ENTER key

5. repeat the same thing to check the password column.

6. then exit the BIOS saving & exit option to save the changes.

Troubleshooting:

Incase if the password does not work please try a Hard Reset as follows.

1. power off the laptop

2 disconnect the power adapter and remove the battery

3. press the Power button for 30 seconds

4. connect the power supply/AC adapter (leave the battery for now) & start Notepad

5. If now see you a password, please enter the same password I've shared before and press on enter

Hope this helps, for other queries in response to the post and feel free to join us again

* Click on the star KUDOS left to say thank you*.

Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

Thank you

K N R K

Although I am an employee of HP, I speak for myself and not for HP

How to stop the spam e-mails in my Inbox to hotmail address?

Original title: too much junk in your Inbox!

why I am and how do I stop these emails from flippin with address "contact12543" ect. ? I'm as much as 46 per day! It's annoying, I'm tired of him, and I do not give my hotmail address to anyone, I don't know! or on a Web site I visit.

I get messeages talk to me about this job more difficult to prevent this garabge in my Inbox, well, WHEN!

Hi Randy,

Thanks for posting your question in the Microsoft Community.

I understand you want to know how to stop e-mail spam in your Inbox to hotmail address. Correct me if I'm wrong.

I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

You should report the e-mail as spam, so that the e-mail that keeps arriving in your Inbox is redirected to the Spam folder directly and you do not have to worry about this.

Please follow the steps described in the links below and check the issue:

Help keep the spam in your Inbox:

http://www.Microsoft.com/security/online-privacy/spam-prevent.aspx

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

When to trust an e-mail message:

http://Windows.Microsoft.com/en-us/Windows7/when-to-trust-an-e-mail-message-IE9

Report an abuse, phishing, or spam in Outlook.com:

http://Windows.Microsoft.com/en-us/Windows/Outlook/abuse-phishing-junk-email

Hacked account:

http://Windows.Microsoft.com/en-us/Windows/Outlook/hacked-account

If the problem persists, then I suggest you to post the same question in the Windows Live Mail forum for additional help.

Portal of Windows Live e-mail:

http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

How to stop emails double in my Inbox in? I get duplicates of all emails.

I use OUTLOOK EXPRESS for my e-mail. For months I get duplicates of 90% of the e-mails received. I can't figure out how to stop the duplicates. Can anyone help?

First of all, check tools | Accounts and make sure that the account is not listed twice.

Second, make sure that your security program is not set to scan e-mail.

If the above does not help, create a new file Pop3uidl.dbx.

Tools | Accounts | Mail | Properties | Advanced. Uncheck: Leave a copy of messages on the server. Then, remove the Pop3uidl.dbx file. You will get the messages once more, but it should be.

Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

With OE closed, find the Pop3uidl.dbx file and delete it. Another will be created automatically when you open OE.

How to stop demand for files compressed in my Outlook Express? This request appears on my screen of many times while I'm working.

How to stop demand for files compressed in my Outlook Express? This request appears on my screen of many times while I'm working, even when I go on the internet, it always appears & crashes me typing. I have a lot of emails and I don't want to compress their files.

original title: HOW can I STOP ASKING to COMPRESS the FILES in OUTLOOK EXPRESS

How to stop demand for files compressed in my Outlook Express? This request appears on my screen of many times while I'm working, even when I go on the internet, it always appears & crashes me typing. I have a lot of emails and I don't want to compress their files.

Compress, (Compact in American English), removes waste of space, not your messages. Please read below, but if compact you and still get the prompt, after return. It is another question.

Why OE insists on compacting folders when I close it? :
http://www.insideoe.com/FAQs/why.htm#compact

Compacting your folders periodically is a must to keep OE works fine and at some point, you may lose all your saved messages if you do not. When you delete or move messages, the space they used remains until you compact.

Never touch anything until the compression is finished.* *.

See:
www.oehelp.com/OETips.aspx#2

With SP2, Automatic compaction in the background has been removed because of problems he has caused. Now, you will get a prompt to compact after 100 closures of OE, you need to do, and do not touch anything until it's finished. If you compact manually, at your convenience, this will also set the counter to zero. See this for more information:
http://www.insideoe.com/files/maintain.htm#compact

If you are fully patched, you will now see a copy of your dbx files copied to the Recycle Bin as BAK files. If something goes wrong when compacting, the messages can be easily restored from this backup. A compact manual resets also the counter in the back of the registry to zero now.

For more information, see the information framed in red here:
www.oehelp.com/OETips.aspx#2

To keep things running smooth and harden faster:

Do not archive mail in default OE folders. It will eventually become corrupt and you may lose mail. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

And backup often.

Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx

Everytime I turn on my email I receive thousands of messages from the mail administrator how to stop it?

Everytime I turn on my Outlook Express I get thousands of messages from mail administrator how to stop this?

You had incorrectly posted your message in Office Outlook forum. I moved to this forum.

Looks like someone is using your e-mail address as the address of the sender of junk mail and you see NDRs from when mail is sent to non-existent addresses. It is not uncommon, and it ends by goes its own. You can try to create a rule to remove these non-delivery reports, or you can connect to your mailbox using a web browser and create a rule it if Outlook Express never sees the messages.

How to stop or remove perlinnoise?

Here is my code:

Similar Questions

This has happened

NA

User Agent

Maybe you are looking for