How to subtract two measures of date format?

Similar Questions

• How can I configure the cell data format

  How can I configure data format of cell numbers: for example, I want to capture 123456.78 and need to be 12A3456.78?

  I tried to put #A # #. # format option, but it didn't work a few time and it became A123456.78.

  I also tried on excel and it worked very well, but I like the numbers better. is there a solution to this problem?

  Thank you

  HEY Chi - Lun,

  I don't think that this is possible as many number format. You should be able to insert A in a text string using a formula, but this would happen in a second cell, not that the number has been entered.

  "Assuming all the"numbers require the same inserted letter after the second number, this should do the work."number" entered in column A; the formula in column B. In the table below, your value as an example is A6.

  = Left (A, 2) & "A" & RIGHT (A, LEN (A) - 2)

  

  Kind regards

  Barry

• How to save two sous-schema data two in one file?

  Hello

  I have a VI tensions from different measurement channels one after the other. How could save the average data two in one file in two columns? The vi is attached. Thank you!

  Watch the context-sensitive help and help for function file writing worksheet to know each connector for then detailed.  You have several things hanging and some things wrong.

  The entrance to the lower part is a Boolean value to append data.  You want it as a True constant since you want to write constantly new data in the file to each iteration of the loop.

  You can't 1 d and 2D connectors at the same time hung.  It is there to give you options.  If the 1 d link has it who uses data, otherwise it uses the connector 2-D data.

  What you want to do is to take the 3 pieces of data and integrate it to a 1 d table and that wire in the 1-D connector.  Connector 2-D leave blank.

• How to subtract two fields in a form?

  I am working on a form of spending and I everything works except one thing.

  Subtract all on payments reports on previous expenditures on the State of current spending. I'm looking at the tab to calculate the properties of text field.  But I don't see a way to remove my two fields.

  Then, I set up a field that contains a negative, except when I display the field in the form, the negative is positive.  I enter-1 as a default value to my field of 'subtraction '.  I was then several 1 negative against most of payment the amount so I can get a negative on the amount of the payment.  I was then going to add the negative on the amount of the payment for the total amount to pay and arrive at a net due, but it does not work.

  Here is the calculation I'm doing:

  Total spending (field calculated from all previous fields.)

  Deductible expense (entered by the user)

  NET check fresh (Total expenses - deductible).

  Can someone tell me how to proceed?

  Thank you

  Dennis

  With Acrobat, there are 3 options of calculations.

  "The field is the _____ of the following fields:" options are for the sum, product, average, min and max operations or actions that could be repeated on several fields. We do generally not subtract or divide several fields in action.

  'Simplified field notation' uses only the field names and values. The field names must begin with an alphabetic character and has no spaces or special characters. Cannot perform conditional control statements or functions. Special characters or spaces may be in domain names, if the JavaScript escape character precedes the special character or a space. 4 arithmetic operations can be performed.

  'Calculation of custom JavaScript' has no restrictions on field names, control statements, functions or mathematical operations. We have access to the field object and the value property of the field object.

• How to convert number in the Date format

  Hi Experts,
  
  I have a date column says. date key order number (ex: 20110202). How to convert this number in format DD/MM/YYYY.
  
  Thanks in advance
  V

  Vincent Krishna wrote:
  Hi Experts,

  I have a date column says. date key order number (ex: 20110202). How to convert this number in format DD/MM/YYYY.

  Thanks in advance
  V

  SQL> select to_char(to_date('20110202','YYYYMMDD'),'DD/MM/YYYY') from dual;
  
  TO_CHAR(TO
  ----------
  02/02/2011
  

• How does the work in AS3 data formatting?

  In some of my older languages, I could convert various types of data in a well-formatted string.

  For example «!» x (20)"would be uppercase the first letter of the string.

  "$> > >, > > 9.99 would give me $1.23.

  (999) 999-9999 converting an integer or a string in a beautiful phone number research

  etc, etc.

  How did this kind of thing better done in AS 3?

  Also, is there a way to feed these masks to the text input controls so that (for example) a telephone number can be entered one already visible (de)-

  Thaks,

  VC

  The default controls are not hidden input, but some third-party controls

  do.

  There is a formatting help in StringFormatter and StringUtil

• How to create two columns of data?

  I am a dynamic form and I want my data to appear in two columns. At this moment I have a container subform text value flowed and the West. It contains two subforms instructions and tools side by side. As follows:

  

  The problem is when the data is sent, the instructions are first of all if they are in a column on the left side. Once the instructions are completed, the tools are in a column on the right side. Like this:

  instruction

  instruction

  instruction

  instruction

  tool

  tool

  tool

  tool

  How can I get to shoot at the same time, in two columns-by-side?

  Use a table like the one I showed in my example for you. In fact, you can simply use this form, import your XML code example into a data connection then simply bind the fields and the data together.

  Paul

• How to subtract two table of 1 d (uint16) same size

  I need to remove two 1 d (uint16) same size table. with output as follows...

  x - y = result (EXPECTED)

  5 - 2 = 3

  4 - 0 = 4

  0-4 = 0

  2 - 3 = 0

  If the difference is less than zero value must be zero. Currently, if I use the digital subtraction... I get...

  x - y = result (OBSERVED)

  5 - 2 = 3

  4 - 0 = 4

  0-4 = 4

  2 - 3 = 1

  Thank you

  Hello rajxabc,

  I don't know why you expect whole math unsigned to produce a 0 in the script show you below.  The U16 ends actually spent 0.

  Thus,.

  0-1 = 65535

  0-2 = 65534

  0-3 = 65533

  

  If you want to change the standard behavior of the unsigned integer math, you need to create a special algorithm for this, produce something like:

  

  There are a number of ways that you can accomplish this, but at the end of the day, I don't know that I would be the label none of them "expected."

• How change value of adf.currentDate Date Format change

  Hi all
  
  
  I try by default a variable to bind a SQL query by default Date VO. I used adf.currentDate in the default Expression of the bind Variable.
  
  the expression returns the value in the format 'YYYY-MM-dd', but the format required for the binding variable is "MM/dd/YYYY".
  
  
  I can have any groovy expression that allows to change the format or should I have to do this programmatically?
  
  Please help me with an idea / code snippet.
  
  Thank you
  TK
  
  Published by: 803641 on October 25, 2010 11:50

  What type is your variable binding (it seems to be a String/varchar) - If you do date comparison in the database, you must use date comparisons. Assuming you are trying to compare a column in the database, you can use something like:

  where your_date_column = to_date(:bind_var, 'YYYY-MM-DD')
  

  If you really need to get a string in the format MM/DD/YYYY, you could:

  to_char(to_date(:bind_var, 'YYYY-MM-DD'), 'MM/DD/YYYY')
  

  John

• How to join two sources of data tables

  Initially, I had these tables in a data source, and so had the tables attached as follows:
  < name cfquery = "getComments" datasource = "#application.dsn #" >
  SELECT a.id, a.rideComment, b.firstName, b.middleName, b.lastName, b.nickName, b.showName
  OF rideComments an a.riderId = b.id ON LEFT JOIN tUser b
  WHERE rideId = #rideInfo.rideId #.
  ORDER BY a.id
  < / cfquery >
  
  But I recently needed to divide my datasource and both tables got divided into differenct datasources. So, how 'join' them now?
  
  < cfquery name = "getComments" datasource = 'revolution' >
  SELECT id, rideId, rideComment
  OF rideComments
  ORDER BY id
  < / cfquery >
  
  < cfquery name = "getComments' datasource 'members' = >
  SELECT firstName, middleName, lastName, nickname showName
  OF tUser
  < / cfquery >

  This approach is to a query of queries. Run your queries and then use a t/t to join them:
  
  SELECT * from [user]
  
  
  SELECT * [ROLE]
  
  
  SELECT *.
  OF qryUsers, qryRoles
  WHERE qryUsers.roleId = qryRoles.id
  
  

• How to record measured analog data on the PC?

  Hello

  I am a beginner in the real-time hardware. I have the cRIO-9024 controller and the cRIO-9112 chassis. I have a few questions:

  (1) I can't see the examples because Labview 2009 shows that The NI Service Locator is not running. I just installed Labview 2009. How can I solve it?

  (2) what is the best way to filter the measured analog data? There are hardware module filtering or I have to use Labview tools as filters pint? I would like to read data to the time step 1 Ms.

  (3) how can I save measured analog data on the PC? I tried to use 'write to file measured', but he did my program slower and I couldn't get my 1 mS of a cycle. Can I use cRIO-9024 memory somehow and after when the programme is complete to save the files to the hard drive? Maybe it would be faster?

  Thanks for any help and examples, whether it would be possible.

  Hello Rodzynek,

  If you do not have the FPGA module (or just for now) the solution you gave with the filter would be OK. Place a second loop for file IO (and possible your communication to the user Windows interface) would be a good idea. Do not forget that you are using on the function of file create the file path represents the drive of the controller cRIO (which is mostly a c drive). You can send via FTP to the RIO DC (using the IP address) and have a look at the files.

  A suggestion to get this file programattically is that the cRIO controller sends the file name of the Windows user interface (after the closing of the record), with the Windows user interface, you can use the FTP functions in Labview to get the measures file.

  Best regards

• Convert number to date format

  HI team,
  
  I have a problem, how we can convert number in date format?
  This is the result of the query.
  
  SQL > col START_TIME for 999999999999999999999999
  SQL > select start_time in qrtz_triggers;
  
  START_TIME
  -------------------------
  1364243906000
  1364589406000
  
  So, I have to change the date format niumber rto.
  
  My date format as for example: "" Mar 25,2013 20:36:45 ""
  
  
  Please suggest me...
  Thank you
  Chavigny
  
  Published by: 939938 on March 14, 2013 06:39

  This is the number of milliseconds since January 1, 1970.

  SQL> SELECT to_char(to_date('01/01/1970','mm/dd/yyyy')+1364243906000/24/60/60/1000
    2  ,'Mon dd, yyyy hh:mi:ss PM') FROM dual;
  
  TO_CHAR(TO_DATE('01/01/1970','
  ------------------------------
  Mar 25, 2013 08:38:26 PM
  

  So in your query instead of start_time use
  TO_CHAR (to_date (' 01/01/1970 ',' mm/DD/yyyy') + start_time/24/60/60/1000,' Mon DD, YYYY HH: mi: ss PM "")

  Published by: kendenny on March 14, 2013 08:31
  Had used mm instead of e for the minutes.

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• Receive error message when calculating the two fields with different date format

  I'm more familiar with SQL Server and Oracle, then after a search online without success, I ask here.

  I use developer PL/SQL with DB Oracle 11g Release 11.2.0.2.0 Enterprise 64-bit

  MyTable:

  ID_Number VarChar2

  Date of Date_Received

  Select ID_Number,

  Date_Received,

  To_Date (substr (ID_Number, 1.6), "YYMMDD") SentDate,.

  Date_Received - NumDays To_Date (substr (ID_Number, 1.6), "YYMMDD")

  FROM MyTable

  Where substr (ID_Number, 7.3) in ('ABC', 'ABD')

  and length (Trim (translate ((substr (ID_Number, 1,6)), '0123456789',' '))) a null value

  ID_Number Date_Received SentDate NumDays

  131002ABC1654106 10/16/10/2013-2013 14 2

  131004ABD8813899 4/12/2013-4/8/2013 4

  131014ABD1844832 10/16/10/14 OF 2013-2013 2

  Sometimes the first 6 characters in the ID_Number aren't the numbers and length (Trim (translate deletes records))

  I want just the records where NumDays > 2

  I tried to put the request in a subquery and using where NumDays > 2 outside.  I also tried using the calculation directly in the Where clause.  Without it in Where clause it works very well, with him in a place, I get the following error:

  ORA-01931: Date format picture ends before converting all of the input string

  
  

  I don't know how to put the two dates in the same format.  I tried to declare the format without result.  I don't understand how I can calculate in the selection, but do not use the same calculation in Where clause.

  Thank you for your help.

  Hello

  SQL is a language to describe the desired results.  How the system gets these results belongs to you don't have much say about which conditions will be applied when.

  One place where you can control the order of things is a CASE expression.  When you say

  CASE

  WHEN condition_1

  THEN expression_1

  END

  You can be sure that expression_1 will be evaluated only when cond_1 is set to TRUE.

  Try something like this:

  WITH got_sent_date AS

  (

  SELECT id_number, date_received

  CASE

  WHEN the TRANSLATION (SUBSTR (id_number, 1, 6)

  , 'x' 0123456789 '.

  , 'x'

  ) IS NULL

  THEN TO_DATE (SUBSTR (id_number, 1-6)

  , "YYMMDD".

  )

  END AS sent_date

  FROM MyTable

  WHERE (id_number, 7, 3) SUBSTR ("ABC", "ABD")

  )

  SELECT id_number

  date_received

  sent_date

  , date_received - sent_date AS num_days

  OF got_sent_date

  WHERE date_received > sent_date + 2

  ;

  If you would care to post some sample data (CREATE TABLE and INSERT statements) and the results desired from this data, I was able to test this.

  Of course, you'll still errors of execution if id_number starts with 6 digits, but they do not have to be valid, for example '131100' or '130229'.  This is one of the reasons why the date information storage in VARCHAR2 columns are a bad idea.  To work around this problem, see

  https://forums.Oracle.com/message/4255051

• How to subtract the DATE CURRENT SYSTEM and tire of Siebel

  Hi Experts,
  
  How to subtract the date of DAY and Date, which came in Siebel?
  
  Example:
  The DAY - Date records in Siebel
  
  Current date = 25/11/2012
  Registration date in Siebel = 20/11/2012
  
  Technically the answers I want will be 5.
  How can I do this? My idea is to put a phrase in the MDB layer, but I want to just get your ideas:
  
  Current_Date - "Oracle Data Warehouse. "'"' Catalogue'."" """dbo"."" TABLE_NAME ". "' COLUMN_NAME '.
  
  
  Thank you!

  Hello

  You can use the available in OBIEE timestampdiff function to get the difference between two dates. This is one of the blogs that can help with the syntax.

  http://Shahin-OBIEE.blogspot.in/2012/04/various-calculations-for-date_16.html

  You can also google timestampdiff function for details on usage and syntax.

  Thank you