How to join two sources of data tables

Initially, I had these tables in a data source, and so had the tables attached as follows:
< name cfquery = "getComments" datasource = "#application.dsn #" >
SELECT a.id, a.rideComment, b.firstName, b.middleName, b.lastName, b.nickName, b.showName
OF rideComments an a.riderId = b.id ON LEFT JOIN tUser b
WHERE rideId = #rideInfo.rideId #.
ORDER BY a.id
< / cfquery >

But I recently needed to divide my datasource and both tables got divided into differenct datasources. So, how 'join' them now?

< cfquery name = "getComments" datasource = 'revolution' >
SELECT id, rideId, rideComment
OF rideComments
ORDER BY id
< / cfquery >

< cfquery name = "getComments' datasource 'members' = >
SELECT firstName, middleName, lastName, nickname showName
OF tUser
< / cfquery >

This approach is to a query of queries. Run your queries and then use a t/t to join them:

SELECT * from [user]

SELECT * [ROLE]

SELECT *.
OF qryUsers, qryRoles
WHERE qryUsers.roleId = qryRoles.id

Tags: ColdFusion

Similar Questions

Oracle how to multiply two columns of different tables and results

Oracle how to multiply two columns of different tables and get the result in the third column?

I want to multiply all the lines of the quantinty column in the table of quantity with the relevant lines of the table of prices price column and get the result of multiplying in the third column. What should I use procedure trigerr? OR IS IT POSSIBLE HOW TO DO IT PLEASE HELP :D

Edited by: 994229 2013-03-15 12:44

/* Formatted on 3/15/2013 3:51:08 PM (QP5 v5.185.11230.41888) */
CREATE TABLE mytable1
AS
   (SELECT 1 id, 5 VALUE FROM DUAL
    UNION ALL
    SELECT 2, 7 FROM DUAL
    UNION ALL
    SELECT 3, 8 FROM DUAL);

CREATE TABLE mytable2
AS
   (SELECT 1 id, 4 VALUE FROM DUAL
    UNION ALL
    SELECT 2, 12 FROM DUAL
    UNION ALL
    SELECT 10, 12 FROM DUAL);

  SELECT id,
         mytable1.VALUE,
         mytable2.VALUE,
         mytable1.VALUE * mytable2.VALUE product
    FROM mytable1 FULL OUTER JOIN mytable2 USING (id)
ORDER BY id;

ID     VALUE     VALUE_1     PRODUCT
1     5     4     20
2     7     12     84
3     8
10          12

How to join two fields with slightly different data
I have two columns, I need joined, both keep the columns of numeric data, but are of type varchar2 (6). The problem is that one of the columns keeps leading zeros to ensure that all 6 characters are used, but not the other. And columns preserve leading zeros may vary how many zeros are in the number-based computing.

For example, the column with zeros can contain the number 4200, which would mean that he would remain with 2 zeros as 004200. Or it could contain 320, which means that he would remain with 3 zeros as 000320.

The other column that does not have leading zeros not only keeps the number, so, in the example above, it would keep 4200 and 320 respectively.

Can someone help on how to join these columns so that they match? I guess I have to delete the zeros in one or add zeros in the other? I tried to use the trunc with zeros on the ground, but it did not work...

The following sql code:

M06.mbr06_prv_id has no zeros, prv647.provider_id zeros. See bold below...

SELECT
M06.mbr06_prv_id,
prv647.Site_ID
Of
Odw.mbr06_mbr_elig m06
JOIN THE
Odw.prv647_prov_exp prv647
WE
M06.mbr06_prv_id = prv647.provider_id
WHERE
M06.mbr06_subs_id = "999999999 '

BTW, I have no control on how this data is represented in a table... !
Hello

user12296489 wrote:
... I guess I have to delete the zeros in one or add zeros in the other?

Yes, this is how I see.
LTRIM removes given characters from the beginning of a string. LPAD adds characters at the beginning of a string. I would use LTRIM in this case, because if you use LTRIM, you probably need to handle a single column. If you use LPAD, you have to play with the two columns, as one of them still has the extra 0, and it sometimes needs them.

I tried to use the trunc with zeros on the ground, but it did not work...

TRUNC is working on the kinds or DATEs; you have VARCHAR2s. You can convert them to numbers, but then you risk of errors to cause bad data (and it linked to the wrong data).
>

The following sql code:

M06.mbr06_prv_id has no zeros, prv647.provider_id zeros. See bold below...

SELECT
M06.mbr06_prv_id,
prv647.Site_ID
Of
Odw.mbr06_mbr_elig m06
JOIN THE
Odw.prv647_prov_exp prv647
WE
M06.mbr06_prv_id = prv647.provider_id
WHERE
M06.mbr06_subs_id = "999999999 '

If you are certain that m06.mbr06_prv_id never has extra characters, whereas the join condition can be
```
ON   m06.mbr06_prv_id   = LTRIM ( prv647.provider_id
                                  , '0'
                       )
```
If this isn't the case, CUT then the two columns.

BTW, I have no control on how this data is represented in a table... !

Report a bad design is for people who don't have not this control. Numbers are the number of columns, not VARCHAR2. If the ID really needs to be strings, they should be validated and standardized once, when they are placed in the table, no more, and more, in all queries that use these columns.

I hope that answers your question.
If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
Explain, using specific examples, how you get these results from these data.
Always tell what version of Oracle you are using.

How to join two tables of different schemas of Oracle by using a subquery
I'm trying to join two different schemas of Oracle tables using a subquery. I can extract data from each of the tables without problem. However, when I combine select statements it by using a subquery I get Oracle error *'ORA-00936: lack of expression ' *. Given that each SELECT statement runs on its own without error I don't understand what's missing. I'm trying to get the result set is matching the LINE_ID of PDTABLE_12_1 in the schema with the table PDTABLE_201 MAT_DESCRIPTION DD_12809 in the RA_12809 schema.

The query is as follows:

SQL = "SELECT [DD_12809]. [PDTABLE_12_1]. LINE_ID OF [DD_12809]. [PDTABLE_12_1] JOIN "_".
+ "(SELECT [RA_12809]. [PDTABLE_201]. MAT_DESCRIPTION "_".
"FROM [RA_12809]. [PDTABLE_201]) AS FAB "_".
+ 'ON [DD_12809]. [PDTABLE_12_1]. PIPING_MATER_CLASS = FAB. PIPING_MATER_CLASS ".

The format of the request is copied from a manual of programming SQL.

I also tried running the query uses a right JOIN on the two tables, but got the same results. Any ideas would be useful. Thank you!

Published by: user11338343 on October 19, 2009 06:55
The format for the join of two tables in Oracle feels like any other database:
```
SELECT a.col1, a.col2, ..., b.col1, b.col2, ...
FROM   schema1.table1 a,
       JOIN schema2.table2 b ON a.col = b.col and ...
WHERE  a.other_col = 'FRED'
AND    ....;
```
Do not place bracketed identifiers in Oracle. The account that connects to the database must have select privileges on the two tables.

How to change the source of data in application with the deployment plan

Hello
JDev Version: 12.1.3
I can't change the source data with the deployment plan bc4j.
Any example on this requirement?
Thank you
Anil

Well, if you take a look at:

http://Biemond.blogspot.com/2009/04/using-WebLogic-deployment-plan-to.html

(one of the links in the link you get), you will see Edvin Biemond answwer:

"you must change the configuration of module of the Application so that it uses a data source. and in the deployment of applications disable deployment of jdbc connection.

Now you is enough to make the good source of data on each wls and deploy ears. »

The simplest (and probably the best) way is, as I told you, and you are also mentioned: open up JDeveloper and change declaratively and re-download the ears

How to join two tables to retrieve the data from the columns in table two. Tables have primary and foreign key relationships

Hello
I want to join the two tables to retrieve the data from the columns of the two table passing parameters to the join query. Tables have primary and foreign key relationships
Details of the table
Alert-1 - AlertCode (FK), AlerID (PK)
2 AlertCode-AlertDefinition-(PK)
Help, please

----------

Hi Vincent,.

I think that you have not worked on adf 12.1.3. In adf 12.1.3 you don't have to explicitly create the association. When you create the EO to your table, Association xxxxFkAssoc, will be created by ADF12.1.3 for you automatically. Please try this and do not answer anything... You can also follow the links below. I solved the problem by using the following link

Oracle ADF Guide step by step - Oracle ADF tutorial: creating a relationship of the master / detail using Oracle ADF

---

How to join two tables if you transpose the rows, columns and rows in one of the table

Hi guys,.

can someone help me please in the write request

I have two tables

Agents and Agent phones but in the agent phones table for the id of an agent it displays 4 rows because one of the column there types of different phones (office, mobile, home, fax)

So instead of display 4 rows, I used max(case...) to convert rows to columns

now how to reach it with another table

Requirement:

Database: 11.2.0.2.0

create the table AGENT_PHONE

(

agent_id NUMBER (20) not null,

agent_type_code VARCHAR2 (10) not null,

agent_type_prefix VARCHAR2 (10) not null,

Phone_Number VARCHAR2 (16) not null,

phone_type_code VARCHAR2 (10) not null

)

CREATE TABLEAGENTS

(

agent_id NUMBER (20) not null,

agent_type_code VARCHAR2 (10) not null,

agent_type_prefix VARCHAR2 (10) not null,

NAME VARCHAR2 (40) NOT NULL

)

INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

VALUES (29709, ARE ', 'OFFICE', '4805551436', 'CELL');

INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

VALUES (29709, ARE ', 'OFFICE', '1111111111', 'PHONE');

INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

VALUES (29709, ARE ', 'OFFICE', '2223334444',' OFF');

INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

VALUES (29709, ARE ', 'OFFICE', '5556667788', 'FAX');

INSERT INTO VALUES AGENTS

(29709, ARE ', 'OFFICE', 'FLY');

INSERT INTO VALUES AGENTS

(1234, ARE ', 'OFFICE', 'MIKE');

SELECT * FROM AGENT_PHONES

AGENT_ID

AGENT_TYPE_CODE

AGENT_TYPE_PREFIX

PHONE_NUMBER

PHONE_TYPE_CODE

---------------------------------------------------------------------------------------------

29709	RE	OFFICE	4805551436	CELL
29709	RE	OFFICE	1111111111	PHONE
29709	RE	OFFICE	2223334444	OFF
29709	RE	OFFICE	5556667788	FAX

SELECT * AGENTS

AGENT_ID

AGENT_TYPE_CODE

AGENT_TYPE_PREFIX

NAME

29709

OFFICE

ROB

1234

OFFICE

MIKE

This is so the data we have in both table

Now, I transposed rows to columns in the table of agent phones so I used the following query

SELECT AP. AGENT_ID,. AGENT_TYPE_CODE,. AGENT_TYPE_PREFIX.

MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'CELL' THEN AP. PHONE_NUMBER END) AS CELL.

MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'OFF' THEN AP PHONE_NUMBER END) AS TURNED OFF.

MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'FAX' THEN AP. PHONE_NUMBER END) LIKE FAX,.

MAX (CASE WHEN PHONE_TYPE_CODE = 'PHONE'. THEN AP PHONE_NUMBER END) AS PHONE

AGENT_PHONE AP

WHERE AP. AGENT_ID = 29709

GROUP OF AP. AGENT_ID, AP. AGENT_TYPE_CODE, AP. AGENT_TYPE_PREFIX.

	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	OFF	FAX	PHONE
1	29709	RE	OFFICE	4805551436	2223334444	5556667788	1111111111

My question is how this to join the agents table so that my output should be like this...

I want to display all the results in the table of the Agent, even if they are not in the table of agent phones. As you can see there are other agent id 1234 is also populated

AGENT_ID

AGENT_TYPE_CODE

AGENT_TYPE_PREFIX

NAME

AGENT_ID

AGENT_TYPE_CODE

AGENT_TYPE_PREFIX

CELL

PHONE

OFF

FAX

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

	29709		RE					OFFICE					ROB			29709		RE					OFFICE				4805551436		1111111111		2223334444		5556667788
	1234		RE					OFFICE					MIKE

Currently, I run this query and I get the output as below

SELECT *.

AGENTS HAS

LEFT OUTER JOIN AGENT_PHONE AP

ON A.AGENT_ID = AP. AGENT_ID

AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	NAME	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	PHONE_NUMBER	PHONE_TYPE_CODE
1	29709	RE	OFFICE	ROB	29709	RE	OFFICE	4805551436	CELL
2	29709	RE	OFFICE	ROB	29709	RE	OFFICE	1111111111	PHONE
3	29709	RE	OFFICE	ROB	29709	RE	OFFICE	2223334444	OFF
4	29709	RE	OFFICE	ROB	29709	RE	OFFICE	5556667788	FAX
5	1234	RE	OFFICE	MIKE

I want id 29709 agent in a line with 1234 agent also id to display

You can rotate your phone number of agent in columns

Select *.

of AGENT_PHONE

pivot)

min (PHONE_NUMBER)

for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

)

AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	PHONE	OFF	FAX
29709	RE	OFFICE	4805551436	1111111111	2223334444	5556667788

Then you can join to view inline or CTE

with AGENT_PHONE_PIVOT like)

Select *.

of AGENT_PHONE

pivot)

min (PHONE_NUMBER)

for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

)

SELECT *.

AGENTS HAS

LEFT OUTER JOIN AGENT_PHONE_PIVOT AP

ON A.AGENT_ID = AP. AGENT_ID

AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	NAME	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	PHONE	OFF	FAX
29709	RE	OFFICE	ROB	29709	RE	OFFICE	4805551436	1111111111	2223334444	5556667788
1234	RE	OFFICE	MIKE	-	-	-	-	-	-	-

Is that what you're looking for?

How to join two tables without constraints?

I want to get back the tables to join without constraints!

Table 1:

get 100
101 wet
series 102

and

Table 2:

10 xxx movies
11 yyy
12 zzz
QUERY 1:

SELECT * FROM TO LEAVE P, CUSTES C
WHERE (P.ID, P.NAME, C.ID, C.NAME) IN (SELECT P1.ID, P1.NAME, C1.ID, C1.NAME
OF P1, C1 CUSTES TO GO)

I got the result like this,

ID ID NAME
101 wet 10 xxx
zzz 101 wet 12
YYY 101 wet 11
Get 100 10 xxx
102 the yyy 11 value
series 102 10 xxx
100 get 11 yyy
100 get 12 zzz
102 the value 12 zzz

All ranks was sent three times! but I need to write once.

QUERY 2:

Select id as pid, name as the name of go
Union
Select id as pid, name as the name of custes;

QUERY2 OUTPUT IS.

NAME OF PID
10 xxx movies
11 yyy
12 zzz
get 100
101 wet
series 102

In the 2nd query get the attached files of the two tables. But my need is two tables record to display like this

ID NAME NAME_1 ID_1
Get 10 xxx 100
wet 11 101 yyy
set of 12 zzz 102

I'm looking for is, I want to join in parallel columns in my trips!

Is there a source... ? or the same code is happy...!

Something like that?

WITH t1 AS (SELECT '100' id, 'get' name FROM DUAL
            UNION
            SELECT '101', 'wet' FROM DUAL
            UNION
            SELECT '102', 'set' FROM DUAL),
     t2 AS (SELECT '10' id, 'xxx' name FROM DUAL
            UNION
            SELECT '11', 'yyy' FROM DUAL
            UNION
            SELECT '12', 'zzz' FROM DUAL)
SELECT id,
       name,
       (SELECT id
          FROM (SELECT ID, name, ROWNUM rw FROM t2) t_in
         WHERE t_in.rw = t_out.rw)
          id_1,
       (SELECT name
          FROM (SELECT ID, name, ROWNUM rw FROM t2) t_in
         WHERE t_in.rw = t_out.rw)
          name_1
  FROM (SELECT ID, name, ROWNUM rw FROM t1) t_out

SQL> WITH t1 AS (SELECT '100' id, 'get' name FROM DUAL
  2              UNION
  3              SELECT '101', 'wet' FROM DUAL
  4              UNION
  5              SELECT '102', 'set' FROM DUAL),
  6       t2 AS (SELECT '10' id, 'xxx' name FROM DUAL
  7              UNION
  8              SELECT '11', 'yyy' FROM DUAL
  9              UNION
 10              SELECT '12', 'zzz' FROM DUAL)
 11  SELECT id,
 12         name,
 13         (SELECT id
 14            FROM (SELECT ID, name, ROWNUM rw FROM t2) t_in
 15           WHERE t_in.rw = t_out.rw)
 16            id_1,
 17         (SELECT name
 18            FROM (SELECT ID, name, ROWNUM rw FROM t2) t_in
 19           WHERE t_in.rw = t_out.rw)
 20            name_1
 21    FROM (SELECT ID, name, ROWNUM rw FROM t1) t_out;

ID  NAME ID_1 NAME_1
--- --- -- ---
100 get 10 xxx
101 wet 11 yyy
102 set 12 zzz

SQL>

The number of rows in the tables are the same?

How to save two sous-schema data two in one file?

Hello

I have a VI tensions from different measurement channels one after the other. How could save the average data two in one file in two columns? The vi is attached. Thank you!

Watch the context-sensitive help and help for function file writing worksheet to know each connector for then detailed. You have several things hanging and some things wrong.

The entrance to the lower part is a Boolean value to append data. You want it as a True constant since you want to write constantly new data in the file to each iteration of the loop.

You can't 1 d and 2D connectors at the same time hung. It is there to give you options. If the 1 d link has it who uses data, otherwise it uses the connector 2-D data.

What you want to do is to take the 3 pieces of data and integrate it to a 1 d table and that wire in the 1-D connector. Connector 2-D leave blank.

How to create two columns of data?

I am a dynamic form and I want my data to appear in two columns. At this moment I have a container subform text value flowed and the West. It contains two subforms instructions and tools side by side. As follows:
The problem is when the data is sent, the instructions are first of all if they are in a column on the left side. Once the instructions are completed, the tools are in a column on the right side. Like this:
instruction
instruction
instruction
instruction
tool
tool
tool
tool
How can I get to shoot at the same time, in two columns-by-side?

Use a table like the one I showed in my example for you. In fact, you can simply use this form, import your XML code example into a data connection then simply bind the fields and the data together.

Paul

How to join two parallel identification relationships?
I have four entities A, B, C and D with the following identification relationships:

A <-b
A <--C
B <-d
C <-d

A has a unique primary key HELP. B and C have their own primary keys SUBMISSION and CID and the primary foreign keys for the primary key of the a. So the primary keys of B and C are (SUBMISSION, HELP) and (CID, HELP). D has its own primary key DID and primary and foreign to B and C keys. So the primary key of D is (, (SUBMISSION, HELP), (CID, AID)). As you can see the primary key of A appears twice in the primary key of D, because of two relationships Parallels identification.

Now I want two aides in the primary key of D are identical. The primary key of D should be a four tuple (SUBMISSION, CID, DID, HELP).

How can I Express that in the logic model of the Data Modeler?

What I've tried so far: I designed the logic model in a physical model and changed there a parallel relations. I changed the child column associated with the redundant reference to HELP the other. After that data Modeler asked me to remove the column created automatically, which is not a reference more. This seems to be a solution for the physical model.

But: there seems to be not possible for this model in the logic model directly nor is engineer possible changes to the physical return to the logical model.

So, what can I do?

I asked this question with some names of more concrete variables to stackoverflow:
http://StackOverflow.com/q/13027950/402322

And this is the physical model after the change explained above:
https://picasaweb.Google.com/LH/photo/TCeW1Si0UOybltn34oIWj9MTjNZETYmyPJy0liipFm0
Hello

You must play with attributes that overlap / folding. Open the properties of the D entity dialog box, go to 'Overlap attributes' page - you should see help-ecosystems1 pair listed. Check the "fold" checkbox. Ecosystems1 attribute will remain in the entity, but there will be no column associated with the relational model after engineering before him. You can change your decision during the direct engineering - data Modeler detects existence of keys that overlap and dialogue engineering position on related tab.

Philippe

How to compare two source codes?

Hello

I would like to know if there is a way to compare the codes from different sources (different .vi or different groups of the vi...) in LabView?

Our 2 production lines are similar, and I would like to know if there are differences in the 2... 2 production lines management programs because we have to make some changes.

Thanks for your help

Benedict

... Adding to the message of Putnam...

We compare two available "Screw" and "VI predetermined.

It will highlight the differences.

Ben

Customer router how EasyVPN join two easy VPN servers?

I have a router in the branch with dynamic ip address, configured as a client of EasyVPN (network extension mode) needs to connect to both servers (two other branches with static Ip) Easyvpn,... is this possible? and how to do io?

On the HUB router, you can try without the isakmp profile:

Crypto-map dynamic dynmap 10
no set isakmp profile L2L

and also keep the following:

ISAKMP crypto cisco123 key address 0.0.0.0 0.0.0.0

Post edited by: Jennifer Halim

How to subtract two measures of date format?
Hello

I need to create the following report

DATE OF BOOK... ARRIVAL_DATE... LEAD_TIME... This is arrival_date-book_date

10 November 10... 15 November 10... 5

In the above example the enforcement timeframe should return 5.

How can achieve this, I get the error:
[nQSError: 10058] A general error occurred. [nQSError: 22023] An arithmetic operation is performed on a non-numeric type. (HY000)
SQL issued: SELECT "Business block Start Date. "' Start date ', 'Business block. "" Block ID ","Business block. "" Date of creation ","Business block. "' Start date '-'Business block. "" Created on "OF THE"Business block summary.

Tried to THROW the dates, Bud did not work either
Concerning
Giuliano
Use the timetstampdiff function

TIMESTAMPDIFF (sql_tsi_day, DATE, ARRIVAL_DATE BOOK)

You cannot use Arithmetic operation on date columns.

Kind regards
Sandeep

How to join two pictures together in a Photo on macbook

I can't move pictures from one album to another on the Photos on my Macbook help!

I asked that your message be passage to:
- Photos for Mac

How to join two sources of data tables

Similar Questions

Maybe you are looking for