How to synchronize the catalog between mac pro and imac?

Similar Questions

• CS5 for mac is installed on an old mac.  I have a new Mac Pro and iMac, that I want to install.  I can do this, and if not what is my best option.  I mainly use Photoshop later.  Thank you!

  I have a new Mac Pro and iMac, I want to install CS5 on them.  I can do this, and if not what is my best option.  I mainly use Photoshop later.  Thank you!

  Personally, I would install just without turning off. Worst thing that will l be happen you will need to disable a. Does not mean that you must uninstall just disable and when you need it, just disable one of the other and activate the current. But I assume CS5 because he is not yet supported most probably don't even follow the activations. I'm guessing the last part but when trying to install and activate without disabling one will not harm what anyone,.

• How to find the difference between standard edition and standard edition one

  How to find the difference between oracle database standard edition and standard edition one 64 bit
  
  (a) using sql
  (b) using the configuration/installation files

  How to find the difference between oracle database standard edition and standard edition one 64 bit

  (a) using sql

  Select * the option of $ v;

  (b) using the configuration/installation files

  opatch lsinventory-details

• How to change the space between folder icon and the text on the personal toolbar?

  I have some files in the personal toolbar with just a letter to indicate what they are, but on the theme that I use, the letter is too far from the record, it belongs to and partially falls under following folder icon. I don't want to increase the space between all the icons to show the full letter, as this decreases the amount of icons that you can have in the toolbar. Instead, I want to reduce the space between the file and the text belonging to him, so he is right next to him instead of 5 pixels away.

  I found various entries to change the padding and margins in userChrome.css, but it's always around the icon, I don't know where to look to close the space between the icon and the corresponding text.

  Any help would be greatly appreciated, thank you.

  Did you check the value of the left margin of the text?

  You can set if necessary negative margin values.

  #PlacesToolbarItems .toolbarbutton-text { margin-left: -2px !important; }

  Add .bookmark-item [container] If this enough for the items in the folder

  #PlacesToolbarItems .bookmark-item[container] .toolbarbutton-text { margin-left: -2px !important; }

• How to know the difference between RDM physical and virtual

  Hello!

  How can I see if a RDM (RAW device) is physical or virtual?

  I can see it in the vmx file or easily elsewhere?

  I have a few servers running both VMFS and RDM disks inside the virtual machine, and when you use ESX Ranger and make an instant backup, they are ignored to be backed up.

  Grateful for a response

  When you change the settings of the virtual machine and choose the RDM - there will be a radio button selected for the RDM mode, it is - it is really obvious. She'll be selected for the physical or virtual.

• How to move the catalog to new pc and external drive?

  I have

  Hello

  Please see export a catalog | Adobe Photoshop Lightroom CC tutorials

  Hope that helps!

  Kind regards

  Sheena

• Transfer of Photoshop CS5 between Macbook Pro and iMac; NO CD

  Hi there; I just bought an iMac, and I try to transfer my already purchased/installed Photoshop CS5 from my Macbook to the iMac. I can't find my CD, but have the serial number. Any idea?

  Download the CS5 products

  Mylenium

• How can I change lightroom 5 previews smart on the book of mac pro (mbp) when lightroom master image files 5 are on my external hard drive is disconnected from the mbp

  How can I change lightroom 5 previews smart on the book of mac pro (mbp) when lightroom master image files 5 are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external hard drive the mbp, I get the pop following window: "external hard drive A" disc could not be ejected because it uses 'Lightroom '. Exit this application and try out this disc again. When I do that and restart Lightroom 5, Adobe Photoshop Lightroom - screen select catalog appears, but does not list my external hard drive A as a choice.

  I've been reviewing Adobe's Lightroom Help | Smart web page Previews Lightroom 5 and still have not been able to understand what I am doing wrong. Any help would be appreciated.

  HI Thomas,

  Thank you very much for your suggestions! They finally gave me the direction I go solve the problems I had. Basically, the Mac Book Pro based Lightroom irdata files still had thumbnails. Once I removed the and redirected Lightroom external hard disk, smart previews of the external drive work when the player is well off the MBP. Much obliged.

  I was wondering if you have any suggestions on how to backup all the files content and related data of Lightroom that exists on the external hard drive to another external hard drive as a backup? Ideally, it would be great if I could be able to launch security HD since the Mac Book Pro and do the work of Lightroom with the backup image files and intelligent previews correctly. Thanks again. Your help has been invaluable.

• What is the difference between the book of mac pro MD101B/A and MD101HN/A

  I need to know the difference between Mac Book pro MD101 B / has and Mac Book Pro 101 HN / has

  They are the two 2012 13 "Mbps;

  https://support.Apple.com/en-us/HT201300

  Ciao.

• Used to properly synchronize my files between my Macbook Pro and iMac.

  Used to properly synchronize my files between my Macbook Pro and iMac. Ive toggled the function of auto-sync, made sure the file names are correctly built, etc.. It is to show the red on all the files on the Pro, but showing the Green controls on the iMac. Any ideas?

  Hello

  We would need to see your files of newspapers of these two machines.

  Newspapers are located in

  Mac:

  The log file can be found here:

  /Users//Library/Application Support/Adobe/CoreSyncSync/CoreSync-YYYY-MM-DD.log

  (where YYYY-MM-DD indicate the date of the last log)

  Note: The user of library users folder is hidden at startup with 10.7 or higher

  See http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html

  Windows:

  The log file can be found here:

  C:\Users\\AppData\Roaming\CoreSync\CoreSync-YYYY-MM-DD.log

  (where YYYY-MM-DD indicate the date of the last log)

  Note: The AppData folder is hidden by default this doc shows how to show if necessary

  http://helpx.Adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html

  Please the zip and send them to [email protected]

  Thank you

  Warner

• How to synchronize the start of IT and relaxation the Scan list (DAQmx Switch)

  Hello

  I want to measure samples of N to the AI0 of Council NI PXI 4461. The measurement starts on a rising edge of a digital triggering provided to the PFI0 of the same Board. The measure is configured with samples of N/2 pretrigged. So far, everything is under control...

  Using an NI PXI 2567 Board, the signal applied at the entrance the 4461 (AI0) switches between a V2 and V1 signal. I would like to synchronize the switch between the two signals with the trigger signal applied to the input of the PFI0 Governing Council 4461. In order to obtain samples of N/2 of V1 and V2 samples N/2. Synchronization of 1 to 5 ms would suffice!

  My question is how to synchronize the start of acquisition of AI pretrigged of 4461 with the switch control given by the Council of 2567?

  Thank you in advance for your help...

  PS: the configuration of the system is:

  -LabView 8.5

  -Chassis PXI-1044

  PXI-4461 on slot 2

  Module 4-slot PXI-2567

  Hi Frederic,.

  I came back to this recently and used the following examples to run the desired synchronization.

  PXI-4461: Acq & graph tension-Int Clk - dig Start & Ref .vi

  Samples per channel = 1000

  Rate (Hz) = 10000.00

  Start the trigger Source = / [name of the instrument DAQmx] / PXI_Trig0

  Onboard start = fall

  Reference Source Trigger = DAQmx Device Name] / PXI_Trig0

  Reference edge = fall

  Trigger samples = Variable (100, 500, 900)

  PXI-2567: Switch Scaning-SW Trigger.vi

  Advance the output terminal full = / [name of the instrument DAQmx] / PXI_Trig0

  Scan list = / [name of the instrument DAQmx] / ch0-> com0.

  Scan list = / [name of the instrument DAQmx] / ch1-> com1;

  Hardware configuration:

  The PXI-2567 module controls an external relay that switches between the voltage of 5 V on ch0 and ch1 0 V.

  The PXI-4461 connects to the COM of the external relay and therefore reads 5V when ch0 is connected; 0 v when ch1 is connected.

  Procedure: The above examples are used in the following procedure.

  1. run the PXI-4461 VI.  A start trigger (falling edge) is necessary to start collecting samples before firing.

  2. launch the module, PXI - 2567 VI.  When ch0 is initially (and immediately) on com0, a trigger is sent to PXI_Trig0.  The PXI-4461 will begin to acquire samples before firing.

  3. - click on the "Connect to the next" button on the front of the PXI - 2567 VI module.  This sends a trigger to entry software for the PXI-2567 module and the transitions of the scan for ch1-> com1 list.  Once the PXI-2567 module remains (debounced), advanced complete relaxation is sent on PXI_Trig0 for the PXI-4461.  The PXI-4461 will begin to acquire samples after outbreak.

  Note: Instead of the trigger of the software entry, an external input trigger can be used (e.g. PXI_Trig1).

  Results:

  > Before instant release of samples = 100

  Delay is caused by the time of actuation of external relay.

  

  > Before instant release of samples = 500

  Delay is caused by the time of actuation of external relay.

  

  > Before instant release of samples = 900

  Delay is caused by the time of actuation of external relay.

  

  I hope that the attached screws and the explanation above helps you and/or other customers who have this problem.

  Best regards

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• Is someone can you please tell me what the "ESD" means to Acrobat Pro Win ESD XI? What is the difference between 'Acrobat Pro XI' and "Acrobat XI Pro Win ESD"?

  Is someone can you please tell me what the "ESD" means to Acrobat Pro Win ESD XI? What is the difference between 'Acrobat Pro XI' and "Acrobat XI Pro Win ESD"?

  Hi pattiparrish,

  ESD stands for electronic Software Distribution. Acrobat XI provided compact disc of thought which included installation CD, on the other hand it was also provided by ESD, which included the direct download for Acrobat link XI products download Adobe Acrobat | Standard, Pro | DC, XI, X.

  There is no difference in the application, the difference, it's just that how it is provided to the customer.

  Kind regards
  Nicos

• How to open the Catalog Manager online

  Hello
  
  IAM trying to copy webcat between two PCs using the catalogue Manager.
  
  I can open the Offin mode.
  How to open the Catalog Manager online.
  opening online showing url which would be the url...
  
  thnx

  Hello...

  The URL should be:

  http://MachineName:9704/Analytics/saw.dll

  If a, b, systems are connected, you can use one or a b machine name in the url, and then access the corresponding machine catalog objects.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• How to synchronize the start time in the waveform graph

  Hi all

  I just find a solution in the forum to select the data you want in a grap of waveform with cursors, however, I don't know how to synchronize the time of beginning of waveform for the second graph. How can I extract start time of the waveform with the index data?

  

  Something like that?  It is a bit gross, but is what I think you're asking, should be able to use it as a starting point.

  

  The Max - Min is to make sure that the cursor is always valid.