How to tell RMAN does not use tape bakups to recover?

We have the discs and strips of incremental backups. When you run recover, RMAN sometimes chooses several fresh tape rather than backups on disk backup. This makes recovering too slowly.

We have tried to remove the band channels, but triggered RMAN

' RMAN-05019: WARNING: no allocated with any channel of type required to retrieve the copy of the data file... ". "and ignored these data recovery files.

Thank you.

Hello

> We have tried to remove the band channels, but triggered RMAN

> "RMAN-05019: WARNING: no allocated with any channel of type required to retrieve the copy of the data file..." "and ignored these data recovery files.

You can try this and see if that helps, and make sure you have sbt_type.

Run {}

allocate channels ch1 DISK device type; # You can add more Channels.

restore database from tag = "name of tag, sitting on the backup drive.

}

HTH,

Pradeep

Tags: Database

Similar Questions

  • Tablespace does not use a certain data file

    Hi all, I am new to Oracle DB. Reported by developer that storage space is full, and then I found that there are two data files associated with the storage space by checking dba_data_files. The first data file size is already full of 32GB, and the second is 8GB. However, it seems that the tablespace does not use the data file second when I check the free space of the tablespace because I cannot find its use. That's why Oracle DB shows ORA-01654 and tell me to add another data file. I fix this by adding another data file. But I'm just wondering why it seems that the tablespace does not use the second data file, I checked the status of second in the data file is online of v$ datafile. Could someone give me an idea about this problem? Thank you very much.

    c115bca7-E432-460f-a0c5-273b2157dcbe wrote:

    Hi all, I am new to Oracle DB. Reported by developer that storage space is full, and then I found that there are two data files associated with the storage space by checking dba_data_files. The first data file size is already full of 32GB, and the second is 8GB. However, it seems that the tablespace does not use the data file second when I check the free space of the tablespace because I cannot find its use. That's why Oracle DB shows ORA-01654 and tell me to add another data file. I fix this by adding another data file. But I'm just wondering why it seems that the tablespace does not use the second data file, I checked the status of second in the data file is online of v$ datafile. Could someone give me an idea about this problem? Thank you very much.

    1 cause the second data file - is not activate with auto-extend and its fixed size, 8 GB, which could deliver the extensions are not free - filled and that you may not able to find any free extends from dba_free_space
    2. Please activate auto extend for this data file and add the new data file based on space allocation.

    -Pavan Kumar N

  • View does not use index Mview underlying but mview uses indexes

    Hello

    I faced a situation where, while querying data to display based on mview does not use the index, but when we wonder of mview it uses index and produce quick results.

    Here are the details:

    
querying from view: (completes in more than a minute even after passing hint)
================================
explain plan for select /*+ index(  ITGI_CREDITOR_LEDGER_CMV ITGI_CREDITOR_LEDGER_INDX) */ * from CR_LEDGER_REP_V where vendor_id='1474911';

Plan hash value: 463951623

---------------------------------------------------------------------------------------------------
| Id  | Operation              | Name                     | Rows  | Bytes | Cost (%CPU)| Time     |
---------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT       |                          |  9056K|  5648M| 97644   (1)| 00:00:04 |
|*  1 |  VIEW                  | CR_LEDGER_REP_V          |  9056K|  5648M| 97644   (1)| 00:00:04 |
|   2 |   COUNT                |                          |       |       |            |          |
|   3 |    MAT_VIEW ACCESS FULL| ITGI_CREDITOR_LEDGER_CMV |  9056K|  2159M| 97644   (1)| 00:00:04 |
---------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   1 - filter("VENDOR_ID"=1474911)



Querying from mview: (completes within a second)
==============================

explain plan for select /*+ index(  ITGI_CREDITOR_LEDGER_CMV ITGI_CREDITOR_LEDGER_INDX) */ * from ITGI_CREDITOR_LEDGER_CMV where vendor_id='1474911';


Plan hash value: 1726512073

--------------------------------------------------------------------------------------------------------------------
| Id  | Operation                              | Name                      | Rows  | Bytes | Cost (%CPU)| Time     |
--------------------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT                       |                           |    21 |  5880 |    21   (0)| 00:00:01 |
|   1 |  MAT_VIEW ACCESS BY INDEX ROWID BATCHED| ITGI_CREDITOR_LEDGER_CMV  |    21 |  5880 |    21   (0)| 00:00:01 |
|*  2 |   INDEX RANGE SCAN                     | ITGI_CREDITOR_LEDGER_INDX |    22 |       |     3   (0)| 00:00:01 |
--------------------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   2 - access("VENDOR_ID"=1474911)



View DDL
========================

CREATE OR REPLACE FORCE VIEW SANJAY.CR_LEDGER_REP_V
(
   QRY,
   SR_NO,
   VENDOR_ID,
   VENDOR_TYPE,
   VENDOR_NUMBER,
   VENDOR_NAME,
   VENDOR_SITE_ID,
   VENDOR_SITE_CODE,
   GL_DATE,
   ACCOUNTING_DATE,
   PO,
   INVOICE_TYPE,
   AP_INVOICE_NO,
   INVOICE_DOC_CAT,
   AP_INVOICE_DATE,
   INVOICE_VOUCHER_NO,
   PAYMENT_VOUCHER_NO,
   CHQ_NO,
   DESCRIPTION,
   PAYMENT_DATE,
   ACC_CODE,
   PAYMENT_METHOD,
   CURR_CODE,
   DEBIT,
   CREDIT
)
AS
   SELECT qry,
          ROWNUM srn,
          vendor_id,
          vendor_type_lookup_code,
          vendor_no,
          vendor_name,
          vendor_site_id,
          vendor_site_code,
          gl_date,
          accounting_date,
          po_distribution_id,
          invoice_type_lookup_code,
          invoice_num,
          doc_category_code,
          invoice_date,
          inv_voucher_num,
          payment_num,
          check_number,
          description,
          pay_accounting_date,
          account_code,
          payment_method_code,
          invoice_currency_code,
          debit,
          credit
     FROM sanjay.itgi_creditor_ledger_cmv;

    The plan does not change even if I do not use advice.

    Although I said developer to use mview directly, but I did not understand this behavior.

    DB version: 12.1

    OPERATING SYSTEM: AIX 6.1

    Kind regards

    Gerard

    Note that the query on the view plan is only to apply your filter predicates on line 1, rather than against the mview in line 3. Line 2 said you that enforcement must correspond to a kind of County before it can filter which is due to the virtual rownum in your point of view.

    You need this column? In my opinion, it's meaningless. Remove the column from the view would mean that the view doesn't have to be assessed in its entirety (if not, how it will calculate rownums?) before allowing you to filter. You asked the developer to implement the work is likely to come with a different value of sr_no (if the developer is even using it?) than what he would have obtained by using the view.

    The column tries to catch a unique key for the view? Are you aware that rownum values can and will change between requests to the same table as the order lines are selected is not guaranteed. If the column is actually useful (and it is correct to calculate at this level) you then could it sense it is calculated inside the mview? This means that you can only refresh the mview completely and rownum values can (and will) only change on refresh.

  • part of the screen lack sound as if all type of himself downplayed a little and does not use the entire screen

    I have a dell studio with vista, I shot it today and the far right 1/4 of my screen has disappeared, its like everything kind of himself downplayed a little and does not use the entire screen. I didn't change anything or add programs. someone has an idea?

    Hi musicwatkins


    Did you the latest changes on the computer?

    You can check if changing the resolution of the screen helps you solve the problem. See below for links-

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

    http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

     

    You can also check if the setting parameters of monitor, referring to the manual of the monitor will help you.

     

    I hope this helps.

  • Firewall Windows does not use recommended settings

    Firewall service Windows is not running: does not use recommended settings

    Firewall service Windows is not running: does not use recommended settings

    Please specify:
    > windows firewall service is not running
    > does not use recommended settings

    If it running or NOT?
    Which of the above is the problem?

    RE: windows firewall service does not

    Start button > in the search box, type services > press the Enter key > scroll down to Windows Firewall and click on it...
    under the State column, it must be said... started
    under the Startup Type column, I must say... Automatic

    If it does not say that, right click on Windows Firewall > click Properties > make the changes.

    RE: does not use recommended settings

    Start button > in the search box, type windows firewall > looks upward at the top on the left, click on Windows Firewall > click on change settings > put on a blue radio point (recommended) level > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • 0 x 80070422 windows firewall does not use recommended settings to help protect your computer

    Hello, I kepp getting this firewall of windows message 0 x 80070422 does not use recommended settings to help protect your computer,.

    Whenever I click on the recommended use of the parameters, it gives me this code. I ran virus and malware scans and I foud more but now they have been removed. But still, I'm afraid that I don't have a wall of fire and that anthing can pass through.

    If anyone can give me some advice it would be greatly appreciated.

    Marko7

    Hello

    Run an online scan to check any virus or any other malicious software:
    http://OneCare.live.com/site/en-us/default.htm

    and see here

    Error code 0 x 80070422 cannot activate the firewall

    I would like to know if this helps
    Elvis

  • Can I create a web database search that does not use Javascript?

    Can I create a web database search that does not use Javascript?

    While it would be possible to do it through custom coding, this type of web database search would not supported by Eloqua.

  • Lightroom does not use my gpu and it says it is compatible, and the driver is updated, what do I do now?

    Lightroom does not use my gpu and it says it is compatible, and the driver is updated, what do I do now?

    As far as I could see, your card supports OpenGL 3.2 only that OpenGL 3.3 is necessary.

  • Why color Temp does not use theory standard blackbody in lightroom?

    Hi all, I would like to ask a question. Why the temperature in Lightroom does not use theory standard blue witch bsigns black body for higher values and the red ones for lower values on the kelvin color temperature scale?

    I'm not a novice and a motion graphic designer and 3D generalist and I do not understand why the Lightrooms does not use the normal scale. You go to a 3D ap and if you are familiar with lightroom you will have some problems whit lighthning because in all the 3d points and from what I've seen other counters aps use the kelvin color temperature values, higher values are asigned to blue spectrum. For example, with a bulb (D65) of natural light has a value of 2700 Kelvin is the red color red but in lightroom is on the opposite side and 2700 you have a tint of blue. I personally find very annoing this approach and I would like to ask Adobe if they could put an option to change the color temperature scale Kelvin standard.

    Thank you

    http://en.Wikipedia.org/wiki/Color_temperature

    Cursors do not set the light black body temperature, but compensation requested the image to compensate for the temperature of the black body of light.  This is going the other way.

    If a picture is taken in tungsten (light that is yellow-ish), we always want to look white 'white' when view us on a screen (as our eyes compensate for the color temperature of the ambient lighting).  To adjust to the lighting low temp black body (i.e. yellow-ish), so we want to make the image more blue, so it does not yellow.  Until the lower part of the blackbody temp lighting (i.e. more yellow enlightenment), the more blue the compensation that we must apply.

  • ORA-16797: database does not use a server parameter file

    I can see newspapers apply pending data. But in the dataguard alter journal generates error ORA-16797: database does not use a server parameter file

    Error message in the logfile dataguard
    -----------------------------------

    DG 2010-03-23-17: 0 2 714415739 MICHAEL 46:45: GET_DRC finished
    DG 2010-03-23-17: 714415740 3 1000000 MICHAEL 46:45: GET_SITE: success. (len = 464)
    DG 2010-03-23-17: 714415740 3 1000000 MICHAEL 46:45: GET_SITE finished
    DG 2010-03-23-17: 2000000 3 714415741 MICHAEL 46:45: GET_SITE: success. (len = 481)
    DG 2010-03-23-17: 2000000 3 714415741 MICHAEL 46:45: GET_SITE finished
    DG 2010-03-23-17: 0 2 714415742 MICHAEL 46:45: CTL_GET_STATUS sent to the ANZPRD site for treatment
    DG 2010-03-23-17: 0 2 714415742 MICHAEL 46:45: CTL_GET_STATUS finished
    DG 2010-03-23-17: 47:32 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16797: database does not use a server parameter file
    DG 2010-03-23-17: 47:32 0 2 704706097 CTL_GET_STATUS operation cancelled during phase 1, error = ORA-16797
    DG 2010-03-23-17: 47:32 0 2 704706097 CTL_GET_STATUS operation cancelled during phase 1, error = ORA-16797

    QL > SELECT MAX(SEQUENCE#), THREAD # V$ ARCHIVED_LOG GROUP THREAD #;

    MAX(SEQUENCE#) THREAD #.
    -------------- ----------
    2, 2000
    2060 1

    I did the steps

    Create spfile pfie
    Shutdown
    Started by spifile

    No luck. Journal of applied began. but I see the same error in the datagurd log file

    Here's what it should look like:

    SQL> show parameter pfile

NAME_COL_PLUS_SHOW_PARAM                                                         TYPE
-------------------------------------------------------------------------------- ------
VALUE_COL_PLUS_SHOW_PARAM
---------------------------------------------------------------------------------------
spfile                                                                           string
C:\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEORABASE.ORA
SQL>

    My guess is that the file is not in the right place. Check the location and your ORACLE_HOME environment variable.

    It should be in $ORACLE_HOME/database for windows, $ORACLE_HOME/dbs for real operating systems.

  • How can I say Migration Wizard does not use WiFi?

    I'm trying to migrate from

    an old Macbook Pro running Yosemite

    for a new Macbook El Capitan running.

    I normally connect these machines to the internet through WiFi and DHCP.

    When I tried to migrate using WiFi it is too slow.

    I tried to disable WiFi on both machines and directly

    connect using an Ethernet cable

    as the Migration Assistant suggested doc.

    I needed a lightning for Ethernet card to connect to this

    cable for the new Macbook Pro.

    So I ran the Migration Wizard on both machines.

    The Migration Wizard insisted to turn on the WiFi again.

    How can I say Migration Wizard to use the cable and not WiFi?

    I guess I have to configure something on the network first,

    but the Migration Wizard documentation does not explain how

    to do manually and does not correct it automatically.

    Connect by Ethernet or drive directly to the computer and turn off Wi - Fi.

  • Why BrowserField demo does not use BrowserField?

    I had some problems getting the BrowserField object to display all images on a page. When you search the formus, it was suggested to use the BrowserFieldDemo included in JDE for example. I tried and it works, but the back button does not work and you can not click on one of the links. Then I discovered that it does not actually use a BrowserField object as in

    net.rim.device.api.browser.field2.BrowserField

    Does anyone know how to make the browserField to work... WITH a functional back button and no image broken?

    I'd appreciate all point in the right direction.

    In fact, I realized that BrowserField demo uses OS 4.0 components while the BrowserField object is only OS 5.

  • does not use the INDEX

    I have problem with a query as follows. It does not index when I keep a function on the left side of the comparison in which the condition.

    But when I remove the function is using the index.

    With BLC AS 
Name                                      Null?    Type
 ----------------------------------------- -------- ----------------------------
 ID                                        NOT NULL NUMBER
 MASTER_VALUE               NOT NULL NUMBER(8)
 DESC_TEXT_ID                                    NUMBER
 GVM                                                     VARCHAR2(50)
 MASTER_LOOKUP_ID    NOT NULL  NUMBER
 WORK_SECTION_ID                          NUMBER
 AUDIT_TRAIL_NO                              NUMBER
 

SQL> SELECT COUNT(*) FROM BLC;
  COUNT(*)
----------
      7769

SQL> SELECT COUNT(DISTINCT(GVM)) "distinct" FROM BLC;
  distinct
----------
      1350

SQL> SELECT COUNT(*) "nulls" FROM BLC WHERE GVM IS NULL;

     nulls
----------
      6419

SQL> SELECT COLUMN_NAME,INDEX_NAME FROM DBA_IND_COLUMNS WHERE TABLE_NAME='BLC';

COLUMN_NAME                              INDEX_NAME
---------------------------------------- ------------------------------
MASTER_LOOKUP_ID      LKPCDE_MSTLKP_FK_I
WORK_SECTION_ID        LKPCDE_WRKSEC_FK_I
GVM                                   LKPCDE_UK
MASTER_VALUE              LKPCDE_MASTERID_VALUE_UK
MASTER_LOOKUP_ID     LKPCDE_MASTERID_VALUE_UK
ID                                       LKPCDE_PK

SQL> EXPLAIN PLAN FOR SELECT ID FROM BLC WHERE UPPER ( GVM) = 'MAIN_ORG';
Explained.
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------
Plan hash value: 3196655606
--------------------------------------------------------------------------------------
| Id  | Operation         | Name             | Rows  | Bytes | Cost (%CPU)| Time|
--------------------------------------------------------------------------------------

PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------
|   0 | SELECT STATEMENT  |                  |    78 |   624 |    18   (0)| 00:00:01 |
|*  1 |  TABLE ACCESS FULL| BLC |    78 |   624 |    18   (0)| 00:00:01 |
--------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
-----------------------------------------------------------------------------------------------------------------------------------
   1 - filter(UPPER("GVM")='MAIN_ORG')
13 rows selected.


SQL> EXPLAIN PLAN FOR SELECT ID FROM BLC WHERE GVM
  = 'MAIN_ORG';
Explained.
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------
Plan hash value: 1620245961
--------------------------------------------------------------------------------
----------------
| Id  | Operation                   | Name             | Rows  | Bytes | Cost (%
CPU)| Time     |
--------------------------------------------------------------------------------
----------------

PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------
|   0 | SELECT STATEMENT            |                  |     1 |     8 |     2
 (0)| 00:00:01 |
|   1 |  TABLE ACCESS BY INDEX ROWID| BLC |     1 |     8 |     2
 (0)| 00:00:01 |
|*  2 |   INDEX UNIQUE SCAN         | LKPCDE_UK        |     1 |       |     1
 (0)| 00:00:01 |
--------------------------------------------------------------------------------
----------------
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------
   2 - access("GVM"='MAIN_ORG')
14 rows selected.

SQL> EXPLAIN PLAN FOR SELECT /* INDEX(LKPCDE_UK) */ ID FROM BLC WHE
RE UPPER ( GVM ) = 'MAIN_ORG';
Explained.
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------
Plan hash value: 3196655606
--------------------------------------------------------------------------------
------
| Id  | Operation         | Name             | Rows  | Bytes | Cost (%CPU)| Time
     |
--------------------------------------------------------------------------------
------

PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------
|   0 | SELECT STATEMENT  |                  |    78 |   624 |    18   (0)| 00:0
0:01 |
|*  1 |  TABLE ACCESS FULL| BLC |    78 |   624 |    18   (0)| 00:0
0:01 |
--------------------------------------------------------------------------------
------

Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------------
---------------------------------------------------
   1 - filter(UPPER("GVM")='MAIN_ORG')
13 rows selected.

    Please let me know how I can force it to use an index as it is causing the CPU usage.

    I can't change the query in the application it is used in several places.

    Thank you

    And/or read: ORACLE-BASE - Oracle function index

  • Why Adobe does not use the codec x264vfw open source for things like. AVI?

    Well we all know who wants to work with the x264vfw that does work in Premiere Elements.

    But I think Adobe might have to operate with the open source x264vfw or AVC-Intra coding Manager.

    I'm still wonder as to why it would work when I re - encode with another program to h264 in MP4 but again?

    Adobe goes really easy and messing with us. because they say there is support for h264 but only for MP4 and the other...

    Why they do not add. Support AVI, which goes to support of Adobe because I can't enter the livechat... because it is only of the week...

    This Codec the H264, X 264 and STROKE-1 are the most used codecs today, in my opinion, so I don't know why they don't sit their dev on it.

    It does not work on their $ 600 Application named Premiere Pro is something I do not understand...

    For me its amazing if I'm honest.

    Now, I want to know why adobe is such a service at this point.

    They all scream it, but Adobe does nothing.

    If someone knows a solution without re-encoding or FFMPEG, because it works well with my Variable rate in Premiere Elements let me know.

    Also, I want a response from Adobe, why they do nothing.

    I tried to put in plugins x264vfw .dll file or the folder, but the problem is not resolved.

    I sit to keep quiet for a while behind that and see how much son he existing... and it is more frustrating.

    ADOBE, it's time to do something!

    Sergadra

    As said, Adobe is the only one who can answer the type of questions you may have. And he does not here.

    Out of curiosity, I ask "have you contacted other manufacturers of video editing software and have been able to get the.

    Why answers to its marketing and strategy of the function defined for its current versions or future?

    Adobe feature/bug report form and a wait and see seems to be your opportunity of Adobe in this respect. So, you wait and see

    If your suggestion is coming in the next version. I'm not criticizing, just reporting what seems to be the 'what. '

    RTA

  • Crystalstark.co.za has a response email facility which Mozilla does not use, but Internet Explorer will use to launch Outlook express. Help, please.

    The site includes a hyperlink for an e-mail response. When you open the site in Internet Explorer, the hyperlink is recognized, but Firefox does not recognize the hyperlink. Or Chrome!

    Well Yes, this happens a lot when Web pages are built using Microsoft Office coding, which uses particular coding too early versions of Internet Explorer.

Maybe you are looking for

  • Syntax error line 43 of swupd.conf

    I get error messages repeated in the swupdate errorlog: Syntax error on line 243 library/software/Server Update/Config/swupd.conf: Invalid address or port Here's the line 243 of this file: To listen *: 0 Everyone see what is the problem? This error s

  • Running a Seq file when running the GUI (command line option) return an error

    Hello I use a LabVIEW based UI to run/execute a file in sequence by using the command line option. My command line is "Test DUT' D:\QF\GUI-test-Sequential.seq D:\QF\GUI-Test.exe - runEntryPoint When I ran the get 3 popup saying that some of the peram

  • SVE14A27CXH the noise of the fan after victory 8.1 upgrade

    Noisy fan (running gear) after upgrade to Windows 8.1. Sony VAIO model number: SVE14A27CXH

  • Paper says wrong size

    I have an XP pro pc HP deskjet 5650 printer (C6490A) I use size document 81/2 x 11 "it prints well with that when I pass paper stock map for calandars a few times it will print most or the time it will say wrong format of paper or jam or do both.  I

  • How can I transfer control a/c Director of netbook on the desktop (a/c comments)

    Some time ago, that I transferred control of a/c administrator from my office to my netbook, I was going on vacation and I needed my netbook with me. Unfortunately I don't remember how I did it, and I need to transfer control to my office. I would ap