How to trace calls OIC

Similar Questions

• How can I call a stage, which is in a sous-suite, of a different sous-suite

  Hi, could someone me, please?

  How can I call a stage, which is in a sous-suite, of a different sous-suite.

  For example:

  Two sub sequence, is called, it is called B. In the order B, there is a step called BStep.

  In a sequence, there is a stage called AStep.

  Now, I Hope AStep can I call BStep, how can I do?

  Thank you in advance!

  Allan,

  What you're asking to do is not a practice of good software.  That's like saying you want to call a single line of code into a DLL.

  The best way to do what you want is to put the steps in a 3rd sous-suite.  Then set the subsequence with the parameters of the step.  Then call this subsequence of a sequence and the sequence B 3rd.

  This way, whenever you update the stage, they both get changes.

  Hope this helps,

• How to properly call modal vi function in the C dll

  I have a labview function that takes a string as input and passes out when the user clicks OK in a 2 button dialog box. I have built a dll and then calls the function from a C++ environment by using the LoadLibrary function. If I set the Panel before shows the default settings and NOT modal the vi is displayed correctly but the dialog box box does not work. If I put the Panel before the vi to modal then vi front panel display correctly, therefor there I find that the dialog should be modal in his view.

  My question is about C++ How can I call a dll that displays a Modal form correctly? or how can I change the dialog box in modeless behavior / defect that can be done to the face before of the vi?

  Thanks in advance for any help.

  Hi, thanks for yor reply.

  The dialog box displays only partially. No, I have not tried the express vi, but I did create a vi to behave like a dialog box 2 button

  allowed me to define it as modeless. It also displays only partially.  I since first announcement also tried to run the dll also using labview and teststand to call the dll, in both cases the dll load and behaves correctly, the dialog box appears correctly.

  This suggests that the problem is with the C++ code but not being is not a very experienced C++ programmer I don't know how to debug the problem more far.

  Any help is highly appreciated.

• How to make calls telephone entrants House to show on computer?

  Original title: show phone numbers.

  Windows XP SP3, PCI Soft Data Fax Modem with SmartCP. My question is how to make calls telephone entrants House to show on computer?

  I have phone line connected to the modem 'in' connection and main phone is connected to the "out" connection. The computer used to display incoming calls from land line, but I had a crash that required me to do a clean reinstall of Win XP and etc, etc, and I don't remember how to set up.

  Thanks in advance,

  Chris

  CallerID display isn't natively provided by Windows XP.  Either you need to reinstall the software SmartCP and/or additional software originally installed on your computer.

  Go to the website of the manufacturer of your computer for you make sure you get the correct version.

• How to block call someones on z3 compact

  How to block call someones on z3 compact

  You can't actually block. There is an option to send calls directly to voicemail, but to block you cannot without a 3rd party app.

• How can I call the stream media player in webworker.

  Hi all.

  I need a few snipets of invoke media player from the webworker blackberry

  How can I call it stream media player in webworker please help me.

  You should be able to:

  location.href = 'mymediaurl';
  

• Smartphones blackBerry how to block calls or I cant.

  need to know how to block calls

  Hi theunderdogg1965

  Welcome to the community

  If you want to block some calls on your device, you can install any App.Go to App World of call blocking, and there are several version free call blocking app available. It allows to block these calls.

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• How can I call Adobe? I need to talk about how to create my site and bind it to lightroom. I have creative cloud.

  How can I call Adobe? I need to talk about how to create my site and bind it to lightroom. I have creative cloud.

  The only phone support I know is not for sales, the use of programs

  You will also likely get detailed assistance in the specific forums for the programs you use

  Forum of https://forums.adobe.com/thread/1929760 to find a forum for your program list

• How can I call method on the view controller Business components

  Hello
  I did a general method to display messages at the view level,
  How can I call this method in the method after validation in the EntityImpl appears automatically after the validation operation.
  Gold how can I call it in _ validationbutton to display after validation;
  
  public class MessageBeans
  *{*
  public static void showMessage (String title, String msgBody, String msgType)
  *{*
  
  FacesContext fctx = FacesContext.getCurrentInstance ();
  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_INFO, title, msgBody);
  fctx.addMessage (null, msg);
  
  
  *}*
  *}*

  1 - Drag and drop the operation of control of data validation on the page.
  2 - Double click on the button, this will bring the dialog box link Action property that allows you to link the button action method in the bean.
  3 - Select the managed bean, or create a new and enter the name of the method. and click Ok.
  3. This will create a method for you to like those posted before, you just need to change the method and show the message after successful validation.

• How to trace part an object

  Nice day

  I would like to know how to trace you left an object and in this case, the part of a letter. Look at my (aweful) below, attempt to show you

  what I'm doing...

  What is the best way to go about this? Tool pen (Tediuos...), copy the letter and cut at some point? I have no idea how to do...

  Thank you

  

  You can use the 'lag path"on the letter to create the form and then cut the way where you have to.

  You should take a look in the manual on the basics of working with paths.

• How the webservice call (two way ssl) from a composite?

  How the webservice call (two way ssl) from a composite? What configuration of weblogic, I put?

  Problem with one of the managed server while activating SSL. _ issue Resovled

  Certificate is not correct according to standarad for its use.

  Kind regards
  Anuj

• How can I call him to XSLT transformations

  Hello
  
  I followed the first example * LoanGateway1 * from Oracle Service Bus samples and tutorials *.
  
  normalLoan It's the WSDL resource
  NormalLoan This is an external business service used by OSB
  ManagerLoanReview This is an external business service used by OSB
  LoanGateway1 It's the proxy OSB service
  
  loanGateway1_TO_managerLoanReview.xsl (request)          It's XSLT Transformation between the Service of Proxy LoanGateway1 and business ManagerLoanReview
  managerLoanReview_TO_loanGateway1.xsl (response)      It's XSLT Transformation between ManagerLoanReview of business and Service of Proxy LoanGateway1
  
  
  Definition of the scenario: a client sends a loan application to a proxy service named LoanGateway1. The default proxy
  service at a stage of conditional routing that checks the value of the interest rate charged in the
  loan application document. If the interest rate is less than 5%, the loan application is forwarded to the
  ManagerLoanReview business service; otherwise, it is routed to NormalLoan business.
  
  From the console of the BSO, I would invoke the XSLT (loanGateway1_TO_managerLoanReview.xsl) to do the conversion application between the Service of Proxy LoanGateway1 and business ManagerLoanReview
  
  From the console of the BSO, I would invoke the XSLT (managerLoanReview_TO_loanGateway1.xsl) file to do the Transformation of response between the ManagerLoanReview of business and Service of Proxy LoanGateway1
  
  
  Can someone tell me how I can call him to XSLT transformations?
  
  Edited by: user10070593 01-mar-2011 05:24

  When you have selected the XQuery, located below, you should an inputfield where you could put in an xpath expression

  So let's say the variableentree of your xslt is my_input, it will show my_input on the left then to the right, it shows the inputfield in which you can put something like $body / *.

  If you do not see the inputfield check if you use the variable 'my_input' in your xslt
  in xquery there will not display the inputfield when you don't make any expressions xpath on the variable, in order to check that too

• How can I call Save as dialog box before you download pdf files?

  How can I call Save as dialog box before you download pdf files?

  Here's my favorite scenario:

  1. the user clicks on the button

  2 Save as dialog box displays

  3. the user chooses the place

  4. a set of PDF files download here OR download a single zip file

  Background:

  I want to ensure that the user sees that the files are downloaded. I'm content to users who are not Web warned.

  Concern:

  1. the user has no idea how to find the downloaded files or files have even downloaded.

  2. I would like to deliver all in the form of zip files. Not sure if the automatic opening of zip files still exist.

  FOR INFO:

  I use jQuery UI buttons. Not sure if that factors in the response.

  Just for clarity, I'm not forcing a download. The user will click on a button.

  Click on a button or click on a link, either way you are technically running a script to force a download.

  I guess that's the PHP on the server.

  Yes but it is only a part of it.  Once the form runs, another script is called that opens the browser download dialog.

  Y at - it a php script to call the open/save dialog box?

  Yes.

  Name this file zip2download.php.

  Add a link to your HTML page:

  zip2download.php">Download the Zip

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/

• How can I call two functions in the HTML Form element attributes

  Hello
  
  I want the same value in the text field two, when I select the value to select the list then the value with a number increment should be two text field.
  I use both java script
  
  < script >
  function sumItems() {}
  function getVal (item) {}
  If ($x (point) .value! = "")
  Return parseFloat ($x (item) .value);
  on the other
  return 0;
  }
  $x('P19_LAST_END_YR').value = getVal ('P19_LAST_STR_YR') + 1;
  }
  < /script >
  
  
  < script >
  function per1Items() {}
  function getVal (item) {}
  If ($x (point) .value! = "")
  Return parseFloat ($x (item) .value);
  on the other
  return 0;
  }
  $x('P19_LAST_END_YR').value = getVal ('P19_START_YEAR') + 1;
  }
  < /script >
  
  
  now how can I call function onchange two attributes of the element in the HTML form for the discount:
  ' onChange = "javascript:sumItems()" onChange ="javascript:per1Items().

  Hello

  Try

  onchange="sumItems();per1Items();"
  

  BR, Jari

• How to trace method calls?

  Consider two simple Java classes below:

  class computer {}

  {Computer()}

  System.out.println ("class computer manufacturer.");

  }

  Sub {On()

  System.out.println ("PC turn...");

  }

  void working() {}

  System.out.println ("PC works...");

  }

  void Off() {}

  System.out.println ("blocking low PC...");

  }

  Public Shared Sub main (String [] args) {}

  Computer my = new Computer();

  Laptop your = new Laptop();

  My. On();

  My.Working ();

  your. On();

  Your.Working ();

  My. OFF();

  your. OFF();

  }

  }

  class Laptop {}

  {Laptop()}

  System.out.println ("constructor of portable class.");

  }

  Sub {On()

  System.out.println ("laptop turn on...");

  }

  void working() {}

  System.out.println ("portable works...");

  }

  void Off() {}

  System.out.println ("blocking laptop down...");

  }

  }

  After the executed program, how do I trace (1) what object call method (2) and how many times?

  Thanks for any suggestions.

  Looking at your code, the answer should be very simple:

  (1) there is a single method, any other component is Computer.main ().
  (2) just count occurrences of the individual channels to the output of your program.

  BTW: Please respect the common naming conventions in Java where each method name begins with a lowercase letter.

  Also don't name your methods after States. Best names for "On()" and 'Off()' would be 'switchOn()' and 'switchOff() '.

  Good bye

  DPT