How to unlock the keyboard on my Tecra R series line

My keyboard is stuck on my other computer of series Tecra R,
I can't access 'e' only to 2 and so on, on the upper keyboard.

I did find what I got wrong or how to fix with the keyboard or with windows 7...

No idea what I need to do?

Thank you

Hello

I think that you have accidentally activated the Num Lock
NumLock key is used to convert a portion of the main keyboard to act as a pad instead of the letters.

Usually you can find the info in your manual how to toggle NumLock
In my case, I have to press Fn + F11 (in some cases FN + F12) to get that license.

Tags: Toshiba

Similar Questions

  • Satellite M70 - 181:How to unlock the keyboard?

    Hello

    My laptop Satellite M70 does not accept any input key when Windows has started. I suppose some kind of keyboard lock was accidentally activated. Anyone know how to unlock the keyboard?

    Thank you!
    Andreas

    Post edited by: Andreas_7

    Hello

    Check if the LED under the F10 or / and F11 keys lights.
    If yes then disable this feature with the FN + F10 or + F11 key combination

  • Tecra A8: How to disassemble the keyboard?

    I would like to disassemble the keyboard in my Tecra A8. Is there a guide to disassembly on the web?

    Hello

    I don t think you will find all the manuals that describe the keypad by removing the procedure. These manuals are not official documents and only for the use of the partner service.

    But to my knowledge the removal of keyboards is not very difficult.
    There should be a thin cover above the keyboard. This coverage masks 2 screws holding the keyboard. You must remove the cover and screws cautious.
    Then it should be possible to remove the keyboard.
    But beware, the keyboard is connected with short, flat cable to the main Board.

  • Qosmio G20: How to replace the keyboard

    DOES ANYONE KNOW HOW TO REPLACE THE KEYBOARD ON A QOSMIO G20?

    Hello

    I m not an owner of the Qosmio G20, but the replacement of keyboard on the G20 is very similar to another series of laptop.
    If you want to remove the keyboard please follow these steps:

    1.) open view.
    2.) Insert your finger into the slot between the reinforcement of the keyboard and the computer. Then,
    Lift the keyboard bracket to unlock and remove.
    3. remove 1 screw from the keyboard hold the plate.
    4. remove the screws fixing the keyboard
    Lift the upper part of the keyboard and turn down the palmrest.
    6. remove the 2 screws of the plate support keyboard and remove the
    keyboard support plate.
    7 disconnect the cable from the keyboard connector on the system board CN3200.
    8. remove the keyboard.

    All that s

    But note; If you have no experience, please don t remove the keyboard.

  • Cursor and laptop keyboard is locked. Need to unlock the keyboard. (Windows 7)

    I need help here. My laptop keyboard and slider are locked. When I try to connect to windows I can't enter a PW or move the cursor, so I'm stuck. I rebooted several times and tried to get into safe mode, but can not enter a password, or move the slider. If I try to connect to Lenix from a CD that works very well. All the keys and the cursor work normally. It must be a Windows problem. Is there a code I can enter that unlocks the keyboard? I saw some comments about special codes that can be used to lock a keyboard and unlock keyboards. I use Windows 7... Thank you

    The problem has been resolved. I don't know how I got in the situation. The children were on my laptop, so who knows. The important thing is that I discovered how to solve this problem thanks to you.

    Here's what I did. I followed the link you provided and followed the steps in 'help of last - known good configuration' and it worked. Thank you very much. Here is the link.

    http://Windows.Microsoft.com/en-in/Windows7/using-last-known-good-configuration

    1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer by clicking on the button start , by clicking on the arrow next to the button stop , then clicking on restart.
    1. Do one of the following:
    2. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by stopping and restarting your computer.

    • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

    1. In the Advanced Boot Options screen, use the arrow keys to select last known good Configuration (Advanced), and then press ENTER.

    2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  • How to unlock the flash from adobe

    How to unlock the flash from adobe

    You have the Plugin Adobe Flash installed version?

    There are two different versions of Flash, ActiveX for IE version and the version of the plugin used by most other browsers.

    1. download the Setup file of Plugin Flash version here:

    Adobe Flash - Plugin version.

    Save it to your desktop.

    2. close Firefox using file > exit

    Then check the Task Manager > processes tab to make sure that firefox.exe is closed.

    {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

    3. then run the Flash configuration from your desktop file.

    4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

    • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

    See this:

    http://vistasupport.MVPs.org/run_as_administrator.htm

  • Satellite L350-24U: how to clean the keyboard after having poured orange juice

    Hello out there.
    I spilled my L350-24U with Orange juice.
    Now, I have 4 keys to self-retaining :-(

    Can someone tell me how to clean the keyboard without damaging the laptop?

    Thanks in advance.

    Hmm, it's still a stupid situation
    Usually you can remove the keyboard of the laptop very easily.
    The keyboard is fixed with screws hidden under thin plastic cover near the line of F1 - F12 key.

    If you would remove plastic this cover then you would be able to remove the screws as well. Then you could lift the keyboard carefully and could disconnect the flat cable of the keyboard and the motherboard.

    Notes; two small latches on both sides of the connector must be moved in order to disconnect the cable.

    Then you could remove the keyboard and could clean it with a damp lint.
    PS: the caps can be removed too.
    But be very careful. You must raise the CAP to get it for free.

    There are many videos on youtube...

  • Satellite L745 - how to remove the keyboard safely?

    Hello, people!

    I need help please. As the topic says, how to remove the keyboard?
    It's because I shared tea on my keyboard and, fortunately, no key was damaged. However, now it is sticky, and it is quite annoying!

    Can someone please help me with the entrance keys, Shift, back space * and other small keys at home.

    Thanks in advance.

    Sticky Keys?
    I really put t know if you will be able to clean the little mechanism under the CAP.

    OK you can try it. What you need to do is remove the key cap first. Pull it gently on the floor. It is set with small farmers in plastic. When the CAP is removed, you can check the situation and try to clean it up.

    When finished put the CAP in place and push it all smoothly. You will hear clicking noise and everything should be OK again. Do it for all the keys.

    Please take it very easy. If you damage this small mechanism you can immediately order new lkeyboard.

  • How to change the keyboard on Portege M300-101?

    Hello

    I have a Portege M300-101, and I would like to know if there are instructions online for how to change the keyboard itself. Our unit comes with, I think, a Belgian keyboard installed... and a U.S. keyboard in the box. Are there instructions available for how to move on the keyboards? Also, I guess it's a good idea to switch the keyboard before turning on the laptop for the first time. Do you agree?

    Best,
    Dainis W. Michel

    Hello Danis

    Unfortunately there is no public document on this subject. You can try to do it alone, but please don t forget that on this guarantee valid path will be cancelled. Basically, the replacement of keyboard is not well complicated and technicians may need 15 minutes to do.

    In my opinion, you can take a risk and pay for replacement before losing the valid guarantee. The Portege is very expensive and of damage to property, it is very risky to be unsecured.

    If you still think that you do not write anything again.

  • How can position the keyboard to the bottom of the screen?

    How can position the keyboard to the bottom of the screen? Please see screenshot below, the keyboard is not at the bottom of the screen.

    Press and hold the keyboard at the bottom right of the keyboard icon. A window pop up that will have two options - Split and the Dock. Click on the option to dock alongside re your keyboard at the bottom of the screen.

    See you soon,.

    GB

  • How to connect the keyboard for apple tv wireless?

    How to connect the keyboard for apple tv wireless?

    If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.

    If you mean the 3rd generation Apple Tv:

    Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported

  • Satellite Pro L100 - how to remove the keyboard

    I have a L100 which has been "sprayed"... don't ask...

    How to remove the keyboard... ideas please

    see you soon

    Bob

    Hello Bob

    The keyboard replacement procedure is almost on all Toshiba laptops. At, first of all it must remove the cover above the keyboard (where the buttons are placed).

    After doing this to remove the keyboard is very easy.

    BTW: is your laptop under warranty? Please be careful about this.

  • Satellite A305 - how to clean the keyboard after juice spills

    Hey guys,.

    I had a the sSatellite series A305 an i could not find discussions on this exactly.
    Basically whats up's had one incident minor orange juice on the left side of the keyboard thankfully not a lot of juice to all minor.
    I managed to clean most on the surface. And had to work it's good enough to get out of the speaker box.

    However, some of the keys are a bit of stick now, i wondered if there are techniques to withdraw safely on that I must do before I try to block these keys. Hmm pressing on enter appear... in any case...

    I had one of these laptops before a few months ago, but one of the keys is broken somehow, after that, I got a little worried because I had to basically return it and get another laptop from work. If im sure it was a defective key with the last one I was not playing with keys, but I'm not sure how sustainable this is. Also this will probably also help to learn how to clean the keyboard, theres a bit of a dust and grump under the space bar which has been botherin me an i have no idea how to remove one get clean the dirt below.

    I'll check this post when I wake up in the morning. If you know the techniques of hair removal good explain please, I'm not very good with directions so patient with me.

    Hello

    To be honest, you will never be able to clean the keyboard. Break down the water is maybe not so bad, but the juice is sticky and can not be cleaned properly.
    I'm afraid that you need a new keyboard. :(

  • How to remove the keyboard on Satellite L850?

    Nobody here knows how to remove the keyboard on a L850 or can point me in the direction of the repair?
    Older models had a band at the top that does this is very simple, but this model seems to be sealed in.

    Hello

    Fix locks around the keyboard. So to remove it, you will need to insert your finger into the left hold of lid and push keyboard corner, so let corner keyboard appears.
    As far as I know there are 14 latches on the lid of the keyboard:
    -6 down,
    -1 lock on the right and 1 bolt left side
    -6 latches in front.

  • Satellite P750-13F - how to activate the keyboard backlit on Windows 8

    Hello!

    Today, I installed Windows 8 premium on my P750-13F, which features a backlit keyboard. In order to upgrade to Windows 8 I had to uninstall certain Toshiba drivers and other programs.

    Now, I have fully functional Windows 8, but I don't know how to access the functions of FN key (screen brightness, wifi power button, volume up/down).

    Now that the FN key is innoperative function that I miss the most is that for illumination of the keyboard, because I can still do everything else by other methods (I mean volume up/down, brightness etc) but I don't know how to illuminate the keyboard now.

    I tried to install the Toshiba hardware configuration utility, but it will not install with Windows 8. I like so much if the FN key remains innoperative (although that would be nice if it would not) but what I really want to be able to change the lighting of the keypad.

    I'll be very grateful for any ideas.

    Up to Toshiba doesn t offer Win8 tools and utility there is nothing you can do about it. I hope that will happen very soon.
    So please be patient until the stuff of Win8 will be offered for download.

Maybe you are looking for

  • Portege M300 - do not have the Internet with IE 8

    I have a Toshiba Portege M300 that worked fine until I updated to Explorer 8. After the update, I can't open the web pages, but the antivirus program continues to download the updates, so there seems to be a link. I have uninnstalled Explorer 8, but

  • My TimeCapsule airport can not find my printer via the USB port

    Hello. I have a HP Laserjet cp1215. I had to reset my TimeCapsule because my Xbox has an update and will not connect to internet. Then theres no reaction when I connect my printer to the TimeCapsule. Any ideas? Thank you

  • Path environment variable limitation

    Hello On a windows 2003 Server SP2 a program does not start when the PATH environment variable is longer than 1023 characters I have a similar limitation on windows XP, but the limit seems to be 2047 I found a link that talks about this kind of limit

  • Foires config pages (WRT160N)

    I had a problem with the speed of the internet on one of my computers, then I tried a firmwareupdate since version 2.0.0.1 for 2.0.0.2 and upgrade page stopped after a while. I thought it was an auto reset of the router, but internet has always worke

  • «Can't find script engine «VBScript.Encode "»

    Try to install a file .vbe but this error keeps popping up, is not the file because it has a high success rate. Please help and thanks in advance.