IPSEC & PAT
Hello
I have a small request... I have 2 sites on which I have the same LAN network 192.168.0.0/24, who needs to talk to each other through IPSEC. I have a pix of cisco at one end & devices other than cisco vpn to another...
Server - noncisco - users (192.168.0.0) pix 192.168.0.x
now... in order for these computers to access the server, I have to do a translation at the remote end. Can I do a PAT and translate all users to a single IP address and use this IP address as a source of valuable traffic? PAT & IPSEC will work fine together?
Yes, IPSec and nat/pat will work together. You can use the nat/pat address as traffic interesting in card crypto as treatment crypto will take place after the transformation of nat/pat.
Let me know if you need more information.
Tags: Cisco Security
Similar Questions
-
How does it works VPN behind PAT
Hello
Everywhere it is said, "If PAT is applied when a client tries to establish a VPN connection to a remote site, you must activate IPSEC over UDP, TCP, or NAT - T. The thing is that I use a DSL modem at home. And even when I disable transparent tunnelling on my Cisco VPN Client software of connection VPN works well? How can this be possible. is not, we know that the IPSEC packets cannot be PATed?
MOST devices have IPSec PAT packages ' ing wrong, simply because there is no TCP or UDP port on the basis of the PAT number. It is not that the packages may not be PAT would have, it's just that most of the devices are not smart enough to be able to do, and therefore you should encapsulate your IPSec in UDP or TCP packets.
I would just say to your modem ADSL is smart enough to understand about you use IPSec and it will be based on a different value in the PAT package. You can have questions from two clients behind this device, like the PAT tool will quite often only able to manage a.
Routers Cisco were able to do that since the code of 12.2 (15) T, so it is not rare that it works.
-
Outgoing PAT to the IPSec Tunnel
Hello
Situation is with range of IP private tunnel of 3rd party who already uses the same private beach, but not with any of the hosts that we need to connect to. All traffic from the office to the 3rd party must be secure.
We want to configure an IPSec tunnel between the two sites (easy) and then use PAT on the PIX Office (6.3 (5)) to make all traffic office appear to be a single private address different.
We tried to do with PDM, but it insists on having no NAT (with an exclusionary rule), or static NAT, but does not seem to allow Pat.
I have attached a copy sanitized the office configuration. Any standard room in PIX have been removed for brevity
I would like constructive guidance on where I'm wrong.
See you soon
Hello
The PIX / ASA will make the NAT translation on the steps below. First, it will check if no no (order No. - nat) nat is configured, then it will check the static nat translation and finally, it will check the translation PAT.
In your configuration, there is a NAT (0) command indicating not to translate any IP of 192.168.0.0 to the remote ip address range, then the PIX won't do the translation and the package is passed to the destination.
Remove the NAT (0) command and edit list access outside_cryptomap_10 with the ip dried up to the remote ip address for this access list is responsible for interesting traffic that needs to be encrypted.
pls control and dream of return.
-
Using dynamic PAT with IPSec VPN
Hello
I will say first of all thanks for reading this post.
My goal is to create a dynamic PAT for 5 private host 1 ip address public, then to allow this ip address public 1 via an ipsec tunnel.
I have an ASA5555 running on code 9.2 (1). Here's what I have so far:
network of object obj - 12.12.12.12 {mapped address}
host 12.12.12.12
object-group, LAN {address}
host 10.0.0.1
host 10.0.0.2
host 10.0.0.3
host 10.0.0.4
host 10.0.0.5
NAT (inside, outside) dynamic source LOCAL obj - 12.12.12.12
First question - haven't set up that PAT correctly? I'm trying to PAT the local private addresses on the public address 12.12.12.12
Now I would use 12.12.12.12 as interesting traffic and leave it in a vpn tunnel:
access-list 1 extended permit ip host 12.12.12.12 object-group Remote_Network
This configuration seems correct? Is there another way to accomplish the same task?
Thank you for your time.
Looks good so far.
But if this PAT is only for VPN traffic, then you can change the policy-nat NAT rule:
nat (inside,outside) source dynamic LOCAL obj-12.12.12.12 destination static Remote_Network Remote_Network
-
Site VPN to IPsec with PAT through the tunnel configuration example
Hello
as I read a lot about vpn connections site-2-site
and pass by PAT through it I still haven't found an example configuration for it on e ASA 55xx.now, I got suite facility with two locations A and B.
192.168.0.0/24 Site has - ipsec - Site B 192.168.200.0/24
172.16.16.0/24 Site has---------------------------------------------------------------------------
Host--> participated in IP 192.168.0.4: 192.168.0.3-> to 192.168.200.20
Host 192.168.0.127--> participated in IP: 192.168.0.3-> to 192.168.200.20
Host 192.168.0.129--> participated in IP: 192.168.0.3-> to 192.168.200.20
Host 192.168.0.253--> participated in IP: 192.168.0.3-> to 192.168.200.20Host 172.16.16.127--> participated in IP: 192.168.0.3-> to 192.168.200.20
Host 172.16.16.253--> participated in IP: 192.168.0.3-> to 192.168.200.20---------------------------------------------------------------------------
Now that I have guests autour within networks 172.16.16.0 like 192.168.0.0,
witch need to access a server terminal server on the SITE b.As I have no influence on where and when guests pop up in my Site.
I would like to hide them behind a single ip address to SITE B.If in the event that a new hosts need access, or old hosts can be deleted,
its as simple as the ACL or conviniently inlet remove the object from the network.so I guess that the acl looks like this:
---------------------------------------------------------------------------
access VPN-PARTICIPATED-HOSTS list allow ip 192.168.0.4 host 192.168.200.20
VPN-PARTICIPATED-HOSTS access list permit ip host 192.168.0.127 192.168.200.20
VPN-PARTICIPATED-HOSTS access list permit ip host 192.168.0.129 192.168.200.20
access VPN-PARTICIPATED-HOSTS list allow ip 192.168.0.253 host 192.168.200.20
VPN-PARTICIPATED-HOSTS access list permit ip host 172.16.16.127 192.168.200.20
VPN-PARTICIPATED-HOSTS access list permit ip host 172.16.16.253 192.168.200.20---------------------------------------------------------------------------
But, now, my big question is, how do I said the asa to use: 192.168.0.3 as the
address for the translation of PAT?something like this he will say, it must be treated according to the policy:
NAT (1-access VPN INVOLVED-HOST internal list)
Now how do I do that?
The rest of the config, I guess that will be quite normal as follows:card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set of AA peers. ABM CC. DD
card crypto outside_map 1 set of transformation-ESP-AES-256-SHA
outside_map card crypto 1 lifetime of security set association, 3600 secondspermit access list extended ip 192.168.0.3 outside_1_cryptomap host 192.168.200.20
---------------------------------------------------------------------------
On SITE B
the config is pretty simple:
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set of peer SITE has IP
card crypto outside_map 1 set of transformation-ESP-AES-256-SHA
outside_map card crypto 1 lifetime of security set association, 3600 secondsoutside_1_cryptomap list extended access allowed host host 192.168.200.20 IP 192.168.0.3
inside_nat0_outbound list extended access allowed host host 192.168.200.20 IP 192.168.0.3
---------------------------------------------------------------------------
Thank you for you're extra eyes and precious time!
Colin
You want to PAT the traffic that goes through the tunnel?
list of access allowed PAT ip 192.168.0.0 255.255.255.0 192.168.200.0 255.255.255.0
PAT 172.16.16.0 permit ip access list 255.255.255.0 192.168.200.0 255.255.255.0
NAT (inside) 1 access list PAT
Global (outside) 1 192.168.0.3 255.255.255.255
Then, the VPN ACL applied to the card encryption:
list of access allowed vpn host ip 192.168.0.3 192.168.200.0 255.255.255.0
Thus, all traffic from Site A will be PATed when you remotely 192.168.200.0/24
The interesting thing is that traffic can only be activated from your end.
The remote end cannot initialize traffic to 192.168.0.3 if there is not a version of dynamic translation on your side.
Is that what you are looking for?
Federico.
-
Hello
I work to connect a PIX 501 VPN for a 3rd party hub 3015. The hub requires all traffic to come from a single source IP address. This IP address is assigned to me as z.z.z.z. I have successfully built the VPN and tested by mapping staticly internal IP with the IP address assigned, but cannot get the orders right to do with PAT in order to have more than one computer on the subnet 10.x.x.0. This Pix is also a backup for internet routing and NAT work currently as well for this.
I can redirect traffic to my subnet to the remote subnet via the VPN, but I can't seem to get the right stuff PAT to the VPN using the assigned IP address. If anyone can give me some advice that would be great.
lines of current config interesting configuration with static mapping:
--------------------------------------------------------------------------
access-list 101 permit ip 10.0.0.0 255.255.255.0 y.y.y.0 255.255.255.0
access-list 102 permit ip y.y.y.0 255.255.255.0 z.z.z.z host
access-list 103 allow host ip y.y.y.0 255.255.255.0 z.z.z.z
IP address outside w.w.w.1 255.255.255.248
IP address inside 10.0.0.1 255.255.255.0
Global 1 interface (outside)
NAT (inside) - 0 102 access list
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
public static z.z.z.z (Interior, exterior) 10.x.x.50 netmask 255.255.255.255 0 0
Route outside 0.0.0.0 0.0.0.0 w.w.w.2 1
correspondence address card crypto mymap 10 103
mymap outside crypto map interface
ISAKMP allows outside
Thank you!
Dave
Dave,
(1) get rid of static electricity. Use more Global/NAT. The static method will create a permanent
translation for your guests inside and they will always be this way natted. Use
NAT of politics, on the contrary, as shown here:
not static (inside, outside) z.z.z.z 10.x.x.50 netmask 255.255.255.255 0 0
Global (outside) 2 z.z.z.z netmask 255.255.255.255
(Inside) NAT 2-list of access 101
(2) the statement, "nat (inside) access 0 2' list will prevent nat of your valuable traffic."
Delete this because you need to nat 2 nat/global card. (as a general rule, simply you
If you terminate VPN clients on your device and do not want inside the traffic which
is intended for the vpn clients to be natted on the external interface).
(3) with the instructions of Global/nat 2, all traffic destined for the remote network will be first
translated into z.z.z.z. Then your card crypto using the ACL 103 will encrypt all traffic which
sources of z.z.z.z for y.y.y.0 24. This translation wil happen only when traffic is destined for the vpn.
I hope this helps. I have this work on many tunnels as you describe.
Jamison
-
IPSec VPN via UDP fails on WRT610N
Hello
Using a Cisco VPN, user can connect, but after have connected you to all stops internet connectivity.
IPsec uses UDP (NAT/PAT).
Anyway to turn it on? The router VPN Passthroughs are all enabled, I even turned on the UDP multicast filter...
Nowhere else in configure anything?
The VPN profile works on the old WRT54G and a SMC router so I guess that's the WRT610N which has a problem?
Thank you!It should not make any difference for the connection if the relay is activated or not. The connection goes through the port UDP ISAKMP 450 that should always work. Disabling the VPN passthrough block ESP IP protocol that is used for data transfer. Your VPN client must then automatically encapsulation UDP Port 4500, which should work fine.
If the connection does not work once you turn off the pull-out decision, I'd say it's a bug. That should never happen. Check the logs in the client to see what happens, maybe, that there was a suspicion.
-
Problems to connect via the Cisco VPN client IPSec of for RV180W small business router
Hello
I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for
> [34360] has no config mode. I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.
Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.
Router log file (I changed the IP
addresses > respectively as well as references to MAC addresses) Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart
> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT> [44074] because it is admitted only after the phase 1.
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for> [4500]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for> [4500] - > [44074] with spi = >.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of> [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP>
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of> [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP>
Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for> [4500] - > [44074] with spi = > The router configuration
IKE policy
VPN strategy
Client configuration
Hôte : < router="" ip=""> >
Authentication group name: remote.com
Password authentication of the Group: mysecretpassword
Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)
Username: myusername
Password: mypassword
Please contact Cisco.
Correct, the RV180 is not compatible with the Cisco VPN Client. The Iphone uses the Cisco VPN Client.
You can use the PPTP on the RV180 server to connect a PPTP Client.
In addition, it RV180 will allow an IPsec connection to third-party customers 3. Greenbow and Shrew Soft are 2 commonly used clients.
-
Is availble for IPsec VPN FOS 6.3 support stateful failover
Is availble for IPsec VPN FOS 6.3 support stateful failover
SAJ
Hello Saj,
Unfortunately not... stateful failover replica information such as:
Table of connection TCP, udp xlate table ports, h.323, PAT port allocation table...
they replicate data such as:
user authentication (uauth) table
Table ISAKMP / IPSEC SA
ARP table
Routing information
Therefore, in the case where the main breaks down, the IPSEC vpn will be reformed for the failover... Meanwhile, the user will not be able to access the applications...
I hope this helps... all the best... the rate of responses if deemed useful...
REDA
-
Pass through IPSEC on Cisco 857
Hello people!
I have gained reciently a Cisco 857 router. I want to do a site-to-site VPN.
I set up the ATM0.1 with "ip unnumbered" VLAN 1 interface. I have not configured the router to enable NAT or PAT. VLAN 1 is configured with a public Ip of my ISP address. Behind the cisco router, I have a Zywall 5, this device is my VPN gateway. Initially, it works very well with the other soho router but it blocks often, for this reason, I decided to change it for a cisco router.
My problem now is that the cisco router does not allow the implementation of VPN.
Need to activate the IPSEC pass-through?, how can I do this?
Thanks in advance!
If you connect through the console:
recording console 7
If you connect via telnet:
farm forestry monitor 7
monitor terminal
Concerning
Farrukh
-
HTTPS protocol between the client vpn and host of the internet through tunnel ipsec-parody
Hello
We have a cisco ASA 5505 and try to get the next job:
ip (192.168.75.5) - connected to the Cisco ASA 5505 VPN client
the customer gets a specific route for an internet address (79.143.218.35 255.255.255.255 192.168.75.1 192.168.75.5 100)
When I try to access the url of the client, I get a syn sent with netstat
When I try trace ASA package, I see the following:
1 FLOW-SEARCH ALLOW Not found no corresponding stream, creating a new stream
2 ROUTE SEARCH entry ALLOW in 0.0.0.0 0.0.0.0 outdoors
3 ACCESS-LIST Journal ALLOW Access-group outside_access_in in interface outside
outside_access_in list extended access permitted tcp everything any https eq
access-list outside_access_in note hyperion outside inside
4 IP-OPTIONS ALLOW 5 CP-PUNT ALLOW 6 VPN IPSec-tunnel-flow ALLOW 7 IP-OPTIONS ALLOW 8 VPN encrypt ALLOW outdoors upward upward outdoors upward upward drop (ipsec-parody) Parody of detected IPSEC When I try the reverse (i.e. from the internet host to vpn client), it seems to work:
1 FLOW-SEARCH ALLOW Not found no corresponding stream, creating a new stream
2 ROUTE SEARCH entry ALLOW in 192.168.75.5 255.255.255.255 outside
3 ACCESS-LIST Journal ALLOW Access-group outside_access_in in interface outside
outside_access_in of access allowed any ip an extended list
4 IP-OPTIONS ALLOW 5 VPN IPSec-tunnel-flow ALLOW 6 VPN encrypt ALLOW My question is why this phenomenon happens and how solve us this problem?
Thanks in advance, Sipke
our running-config:
: Saved
:
ASA Version 8.0 (4)
!
ciscoasa hostname
domain somedomain
activate the password - encrypted
passwd - encrypted
names of
name 10.10.1.0 Hyperion
name 164.140.159.x xxxx
name 192.168.72.25 xxxx
name 192.168.72.24 xxxx
name 192.168.72.196 xxxx
name 192.168.75.0 vpn clients
name 213.206.236.0 xxxx
name 143.47.160.0 xxxx
name 141.143.32.0 xxxx
name 141.143.0.0 xxxx
name 192.168.72.27 xxxx
name 10.1.11.0 xxxx
name 10.1.2.240 xxxx
name 10.1.1.0 xxxx
name 10.75.2.1 xxxx
name 10.75.2.23 xxxx
name 192.168.72.150 xxxx
name 192.168.33.0 xxxx
name 192.168.72.26 xxxx
name 192.168.72.5 xxxx
name 192.168.23.0 xxxx
name 192.168.34.0 xxxx
name 79.143.218.35 inethost
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.72.254 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP address 193.173.x.x 255.255.255.240
OSPF cost 10
!
interface Vlan3
Shutdown
nameif dmz
security-level 50
192.168.50.1 IP address 255.255.255.0
OSPF cost 10
!
interface Vlan23
nameif wireless
security-level 80
192.168.40.1 IP address 255.255.255.0
OSPF cost 10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
switchport access vlan 23
!
interface Ethernet0/7
!
passive FTP mode
clock timezone THATS 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
DNS lookup field inside
DNS server-group DefaultDNS
domain pearle.local
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
Remote Desktop Protocol Description
EQ port 3389 object
object-group service UDP - udp VC
range of object-port 60000 60039
object-group VC - TCP tcp service
60000 60009 object-port Beach
object-group service tcp Fortis
1501 1501 object-port Beach
Beach of port-object 1502-1502
Beach of port-object sqlnet sqlnet
1584 1584 object-port Beach
1592 1592 object-port Beach
object-group service tcp fortis
1592 1592 object-port Beach
Beach of port-object 1502-1502
1584 1584 object-port Beach
Beach of port-object sqlnet sqlnet
1501 1501 object-port Beach
1500 1500 object-port Beach
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.50.0 255.255.255.0
object-network 192.168.72.0 255.255.255.0
object-network 192.168.40.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.50.0 255.255.255.0
object-network 192.168.72.0 255.255.255.0
object-group network inside-networks
object-network 192.168.72.0 255.255.255.0
WingFTP_TCP tcp service object-group
Secure FTP description
port-object eq 989
port-object eq 990
DM_INLINE_TCP_1 tcp service object-group
port-object eq ftp
port-object eq ftp - data
Group object WingFTP_TCP
DM_INLINE_TCP_2 tcp service object-group
port-object eq ftp
port-object eq ftp - data
Group object WingFTP_TCP
the DM_INLINE_NETWORK_3 object-group network
object-network 192.168.72.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
the DM_INLINE_NETWORK_4 object-group network
object-network 192.168.72.0 255.255.255.0
object-network VPN_Pool_2 255.255.255.0
object-group network Oracle
network-object OracleTwo 255.255.224.0
network-object OracleOne 255.255.240.0
network-object OracleThree 255.255.224.0
the DM_INLINE_NETWORK_5 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_6 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_7 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC
the DM_INLINE_NETWORK_8 object-group network
network-object Grandvision 255.255.255.0
network-object Grandvision2 255.255.255.240
object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
EQ-3389 tcp service object
the DM_INLINE_NETWORK_9 object-group network
network-object OracleThree 255.255.0.0
network-object OracleTwo 255.255.224.0
network-object OracleOne 255.255.240.0
object-group service DM_INLINE_SERVICE_3
the purpose of the ip service
EQ-3389 tcp service object
Atera tcp service object-group
Atera Webbased monitoring description
8001 8001 object-port Beach
8002 8002 object-port Beach
8003 8003 object-port Beach
WingFTP_UDP udp service object-group
port-object eq 989
port-object eq 990
WingFTP tcp service object-group
Description range of ports for the transmission of data
object-port range 1024-1054
HTTPS_redirected tcp service object-group
Description redirect WingFTP Server
port-object eq 40200
Note to inside_access_in to access list ICMP test protocol inside outside
inside_access_in list extended access allow icmp 192.168.72.0 255.255.255.0 any
Note to inside_access_in to access list ICMP test protocol inside outside
access-list inside_access_in note HTTP inside outside
inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 any eq www
access-list inside_access_in note queries DNS inside to outside
inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 no matter what eq field
access-list inside_access_in note the HTTPS protocol inside and outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any https eq
Note to inside_access_in to access list ICMP test protocol inside outside
access-list inside_access_in note 7472 Epo-items inside outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq 7472
access-list inside_access_in note POP3 inside outside
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq pop3
inside_access_in list extended access permit udp host LifeSize-PE-HQ any object-group UDP - VC
inside_access_in list extended access permit tcp host LifeSize-PE-HQ all eq h323
access-list inside_access_in note video conference services
inside_access_in list extended access permit tcp host LifeSize-PE-HQ any object-group VC - TCP
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any
Note to inside_access_in to access list Fortis
inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any object-group Fortis
access extensive list ip 192.168.40.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any eq www
inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any https eq
inside_access_in allowed all Hyperion 255.255.255.0 ip extended access list
inside_access_in list extended access udp allowed any any eq isakmp
inside_access_in list extended access udp allowed any any eq ntp
inside_access_in list extended access udp allowed any any eq 4500
inside_access_in list of allowed ip extended access any Oracle object-group
inside_access_in list extended access udp allowed any any eq 10000
access-list inside_access_in note PPTP inside outside
inside_access_in list extended access permit tcp any any eq pptp
access-list inside_access_in note WILL inside outside
inside_access_in list extended access will permit a full
Note to inside_access_in to access the Infrastructure of the RIM BES server list
inside_access_in list extended access permit tcp host BESServer any eq 3101
inside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group
inside_access_in list extended access permit tcp any any HTTPS_redirected object-group
access extensive list ip Hyperion 255.255.255.0 inside_access_in 255.255.255.0 allow VPN_Pool_2
inside_access_in list extended access permit udp any host 86.109.255.177 eq 1194
access extensive list ip 192.168.72.0 inside_access_in allow 255.255.255.0 DM_INLINE_NETWORK_7 object-group
access extensive list ip VPN_Pool_2 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access deny ip any any inactive debug log
Note to outside_access_in to access list ICMP test protocol outside inside
outside_access_in list extended access permit icmp any one
access-list outside_access_in Note SMTP outside inside
outside_access_in list extended access permit tcp any any eq smtp
outside_access_in list extended access udp allowed any any eq ntp disable journal
access-list outside_access_in note 7472 EPO-items outside inside
outside_access_in list extended access permit tcp any any eq 7472
outside_access_in list extended access permit tcp any any object-group inactive RDP
outside_access_in list extended access permit tcp any any eq www
outside_access_in list extended access permit tcp any any HTTPS_redirected object-group
outside_access_in list extended access permitted tcp everything any https eq
access-list outside_access_in note hyperion outside inside
outside_access_in list extended access permitted tcp Hyperion 255.255.255.0 DM_INLINE_NETWORK_4 object-group
outside_access_in to access Hyperion 255.255.255.0 ip extended list object-group DM_INLINE_NETWORK_3 allow
outside_access_in list extended access permit tcp any host LifeSize-PE-HQ eq h323
outside_access_in list extended access permit tcp any host LifeSize-PE-HQ object-group VC - TCP
outside_access_in list extended access permit udp any host group-object-LifeSize-PE-HQ UDP - VC
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access udp allowed any any eq 4500
outside_access_in list extended access udp allowed any any eq isakmp
outside_access_in list extended access udp allowed any any eq 10000
outside_access_in list extended access will permit a full
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_8 192.168.72.0 255.255.255.0 inactive
outside_access_in list extended access permit tcp any any Atera object-group
outside_access_in list extended access deny ip any any inactive debug log
outside_1_cryptomap list extended access allowed object-group Hyperion DM_INLINE_NETWORK_2 255.255.255.0 ip
outside_1_cryptomap to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow Hyperion 255.255.255.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 193.172.182.64 255.255.255.240
inside_nat0_outbound list of allowed ip extended access all 192.168.72.192 255.255.255.192
inside_nat0_outbound list of allowed ip extended access all 192.168.72.0 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 VPN_Pool_2 255.255.255.0
access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_5 object-group
inside_nat0_outbound list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0
inside_nat0_outbound list of allowed ip extended access any Swabach 255.255.255.0
access-list 200 scope allow tcp all fortis of fortis host object-group
access extensive list ip VPN_Pool_2 outside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_9 object-group
outside_cryptomap_2 list extended access allowed object-group Hyperion DM_INLINE_NETWORK_1 255.255.255.0 ip
outside_cryptomap_2 to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0
Note Wireless_access_in of access list, select Hyperion / wifi access NAT rule.
Access extensive list ip 192.168.40.0 Wireless_access_in allow Hyperion inactive 255.255.255.0 255.255.255.0
Wireless_access_in list extended access deny ip 192.168.40.0 255.255.255.0 192.168.72.0 255.255.255.0
Comment by Wireless_access_in-list of the traffic Internet access
Access extensive list ip 192.168.40.0 Wireless_access_in allow 255.255.255.0 any
standard access list splittunnelclientvpn allow 192.168.72.0 255.255.255.0
splittunnelclientvpn list standard access allowed Hyperion 255.255.255.0
standard access list splittunnelclientvpn allow Pearleshare 255.255.255.0
splittunnelclientvpn list standard access allowed host 85.17.235.22
splittunnelclientvpn list standard access allowed OracleThree 255.255.224.0
standard access list splittunnelclientvpn allow 143.47.128.0 255.255.240.0
splittunnelclientvpn list standard access allowed host inethost
Standard access list SplittnlHyperion allow OracleThree 255.255.0.0
Standard access list SplittnlOOD allow OracleThree 255.255.0.0
Standard access list SplittnlOOD allow 143.47.128.0 255.255.240.0
access extensive list ip 192.168.72.0 outside_cryptomap allow 255.255.255.0 DM_INLINE_NETWORK_6 object-group
outside_cryptomap_1 list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0
outside_cryptomap_3 list of allowed ip extended access any Swabach 255.255.255.0
192.168.72.0 IP Access-list extended sheep 255.255.255.0 GrandVisionSoesterberg 255.255.255.0 allow
192.168.72.0 IP Access-list extended sheep 255.255.255.0 VPN_Pool_2 255.255.255.0 allow
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
MTU 1500 wireless
local pool VPN_DHCP 192.168.72.220 - 192.168.72.235 255.255.255.0 IP mask
mask 192.168.75.1 - 192.168.75.50 255.255.255.0 IP local pool VPN_Range_2
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 613.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (wireless) 1 192.168.40.0 255.255.255.0
public static tcp (indoor, outdoor) interface smtp smtp Mailsrv_Pearle_Europe netmask 255.255.255.255
public static tcp (indoor, outdoor) interface ftp ftp netmask 255.255.255.255 Pearle-DC02
public static 990 Pearle-DC02 990 netmask 255.255.255.255 interface tcp (indoor, outdoor)
static (inside, outside) tcp 3389 3389 Mailsrv_Pearle_Europe netmask 255.255.255.255 interface
public static tcp (indoor, outdoor) interface www Pearle-DC02 www netmask 255.255.255.255
public static 40200 Pearle-DC02 40200 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static tcp (indoor, outdoor) interface https Exchange2010 https netmask 255.255.255.255
public static tcp (indoor, outdoor) interface h323 h323 LifeSize-PE-HQ netmask 255.255.255.255
public static 60000 60000 LifeSize-PE-HQ netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static (inside, outside) udp interface 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255
public static (inside, outside) udp interface 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255
public static (inside, outside) udp interface 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255
public static (inside, outside) udp interface 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255
public static (inside, outside) udp interface 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255
public static (inside, outside) udp interface 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255
public static (inside, outside) udp interface 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255
public static (inside, outside) udp interface 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255
public static (inside, outside) udp interface 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255
public static (inside, outside) udp interface 60010 LifeSize-PE-HQ 60010 netmask 255.255.255.255
public static (inside, outside) udp interface 60011 LifeSize-PE-HQ 60011 netmask 255.255.255.255
public static (inside, outside) udp interface 60012 LifeSize-PE-HQ 60012 netmask 255.255.255.255
public static (inside, outside) udp interface 60013 LifeSize-PE-HQ 60013 netmask 255.255.255.255
public static (inside, outside) udp interface 60014 LifeSize-PE-HQ 60014 netmask 255.255.255.255
public static (inside, outside) udp interface 60015 LifeSize-PE-HQ 60015 netmask 255.255.255.255
public static (inside, outside) udp interface 60016 LifeSize-PE-HQ 60016 netmask 255.255.255.255
public static (inside, outside) udp interface 60017 LifeSize-PE-HQ 60017 netmask 255.255.255.255
public static (inside, outside) udp interface 60018 LifeSize-PE-HQ 60018 netmask 255.255.255.255
public static (inside, outside) udp interface 60019 LifeSize-PE-HQ 60019 netmask 255.255.255.255
public static (inside, outside) udp interface 60020 LifeSize-PE-HQ 60020 netmask 255.255.255.255
public static (inside, outside) udp interface 60021 60021 LifeSize-PE-HQ netmask 255.255.255.255
public static (inside, outside) udp interface 60022 LifeSize-PE-HQ 60022 netmask 255.255.255.255
public static (inside, outside) udp interface 60023 LifeSize-PE-HQ 60023 netmask 255.255.255.255
public static (inside, outside) udp interface 60024 LifeSize-PE-HQ 60024 netmask 255.255.255.255
public static (inside, outside) udp interface 60025 LifeSize-PE-HQ 60025 netmask 255.255.255.255
public static (inside, outside) udp interface 60026 LifeSize-PE-HQ 60026 netmask 255.255.255.255
public static (inside, outside) udp interface 60027 LifeSize-PE-HQ 60027 netmask 255.255.255.255
public static (inside, outside) udp interface 60028 LifeSize-PE-HQ 60028 netmask 255.255.255.255
public static (inside, outside) udp interface 60029 LifeSize-PE-HQ 60029 netmask 255.255.255.255
public static (inside, outside) udp interface 60030 LifeSize-PE-HQ 60030 netmask 255.255.255.255
public static (inside, outside) udp interface 60031 LifeSize-PE-HQ 60031 netmask 255.255.255.255
public static (inside, outside) udp interface 60032 LifeSize-PE-HQ 60032 netmask 255.255.255.255
public static (inside, outside) udp interface 60033 LifeSize-PE-HQ 60033 netmask 255.255.255.255
public static (inside, outside) udp interface 60034 LifeSize-PE-HQ 60034 netmask 255.255.255.255
public static (inside, outside) udp interface 60035 LifeSize-PE-HQ 60035 netmask 255.255.255.255
public static (inside, outside) udp interface 60036 LifeSize-PE-HQ 60036 netmask 255.255.255.255
public static (inside, outside) udp interface 60037 LifeSize-PE-HQ 60037 netmask 255.255.255.255
public static (inside, outside) udp interface 60038 LifeSize-PE-HQ 60038 netmask 255.255.255.255
public static (inside, outside) udp interface 60039 LifeSize-PE-HQ 60039 netmask 255.255.255.255
public static (inside, outside) udp interface 60040 60040 LifeSize-PE-HQ netmask 255.255.255.255
public static Mailsrv_Pearle_Europe 7472 netmask 255.255.255.255 7472 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8001 8001 interface tcp (indoor, outdoor)
public static 8002 8002 LanSweep-XP netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8003 8003 interface tcp (indoor, outdoor)
static (inside, outside) 193.173.12.194 tcp https Pearle-DC02 https netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Access-group Wireless_access_in in wireless interface
Route outside 0.0.0.0 0.0.0.0 193.173.12.206 1
Route outside OracleThree 255.255.224.0 193.173.12.198 1
Route outside 143.47.128.0 255.255.240.0 193.173.12.198 1
Route inside 172.27.0.0 255.255.255.0 Pearle-DC02 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.40.0 255.255.255.0 Wireless
http 192.168.1.0 255.255.255.0 inside
http 192.168.72.0 255.255.255.0 inside
http GrandVisionSoesterberg 255.255.255.0 inside
SNMP-server host inside 192.168.33.29 survey community public version 2 c
location of Server SNMP Schiphol
contact Server SNMP SSmeekes
SNMP-Server Public community
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set esp-aes-256 GRANDVISION esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map0 1 match address outside_cryptomap_1
outside_map0 card crypto 1jeu pfs
outside_map0 card crypto 1jeu peer 212.78.223.182
outside_map0 card crypto 1jeu transform-set ESP ESP-3DES-SHA-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-ESP ESP-3DES-MD5 MD5-DES-SHA ESP-DES-MD5
outside_map0 map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map0 1 set security-association life kilobytes 4608000
card crypto game 2 outside_map0 address outside_cryptomap_2
outside_map0 crypto map peer set 2 193.173.12.193
card crypto outside_map0 2 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5
life card crypto outside_map0 2 set security-association seconds 28800
card crypto outside_map0 2 set security-association life kilobytes 4608000
card crypto outside_map0 3 match address outside_1_cryptomap
outside_map0 card crypto 3 set pfs
outside_map0 card crypto 3 peers set 193.172.182.66
outside_map0 crypto map 3 the value transform-set ESP-3DES-SHA
life card crypto outside_map0 3 set security-association seconds 28800
card crypto outside_map0 3 set security-association life kilobytes 4608000
card crypto outside_map0 game 4 address outside_cryptomap
outside_map0 card crypto 4 peers set 213.56.81.58
outside_map0 4 set transform-set GRANDVISION crypto card
life card crypto outside_map0 4 set security-association seconds 28800
card crypto outside_map0 4 set security-association life kilobytes 4608000
card crypto outside_map0 5 match address outside_cryptomap_3
outside_map0 card crypto 5 set pfs
outside_map0 crypto card 5 peers set 86.109.255.177
outside_map0 card crypto 5 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5
life card crypto outside_map0 5 set security-association seconds 28800
card crypto outside_map0 5 set security-association life kilobytes 4608000
Crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
outside_map0 interface card crypto outside
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP enable dmz
crypto ISAKMP enable wireless
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.72.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.72.0 255.255.255.0 inside
SSH GrandVisionSoesterberg 255.255.255.0 inside
SSH 213.144.239.0 255.255.255.192 outside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd dns 194.151.228.18 is 10.10.1.100
dhcpd outside auto_config
!
dhcpd address 192.168.72.253 - 192.168.72.253 inside
!
dhcpd address dmz 192.168.50.10 - 192.168.50.50
dhcpd enable dmz
!
dhcpd address wireless 192.168.40.10 - 192.168.40.99
dhcpd dns 194.151.228.18 wireless interface
dhcpd activate wireless
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Group Policy "pearle_vpn_Hyp only" internal
attributes of Group Policy "pearle_vpn_Hyp only".
value of server WINS 192.168.72.25
value of server DNS 192.168.72.25
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SplittnlHyperion
Split-dns value pearle.local
internal pearle_vpn_OOD_only group policy
attributes of the strategy of group pearle_vpn_OOD_only
value of Split-tunnel-network-list SplittnlOOD
internal pearle_vpn group policy
attributes of the strategy of group pearle_vpn
value of server WINS 192.168.72.25
value of server DNS 192.168.72.25
Protocol-tunnel-VPN IPSec l2tp ipsec svc
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list splittunnelclientvpn
Pearle.local value by default-field
Split-dns value pearle.local
username anyone password encrypted password
username something conferred
VPN-group-policy pearle_vpn_OOD_only
type of remote access service
tunnel-group 193 type ipsec-l2l
tunnel-group 193 ipsec-attributes
pre-shared-key *.
tunnel-group 193.173.12.193 type ipsec-l2l
IPSec-attributes tunnel-group 193.173.12.193
pre-shared-key *.
NOCHECK Peer-id-validate
type tunnel-group pearle_vpn remote access
tunnel-group pearle_vpn General-attributes
address pool VPN_Range_2
Group Policy - by default-pearle_vpn
pearle_vpn group of tunnel ipsec-attributes
pre-shared-key *.
type tunnel-group Pearle_VPN_2 remote access
attributes global-tunnel-group Pearle_VPN_2
address pool VPN_Range_2
strategy-group-by default "pearle_vpn_Hyp only".
IPSec-attributes tunnel-group Pearle_VPN_2
pre-shared-key *.
tunnel-group 213.56.81.58 type ipsec-l2l
IPSec-attributes tunnel-group 213.56.81.58
pre-shared-key *.
tunnel-group 212.78.223.182 type ipsec-l2l
IPSec-attributes tunnel-group 212.78.223.182
pre-shared-key *.
tunnel-group 86.109.255.177 type ipsec-l2l
IPSec-attributes tunnel-group 86.109.255.177
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:7d4d9c7ca7c865d9e40f5d77ed1238eb
: end
ASDM image disk0: / asdm - 613.bin
ASDM BESServer 255.255.255.255 inside location
ASDM VPN_Pool_2 255.255.255.0 inside location
ASDM OracleTwo 255.255.224.0 inside location
ASDM OracleOne 255.255.240.0 inside location
ASDM OracleThree 255.255.224.0 inside location
ASDM location Exchange2010 255.255.255.255 inside
ASDM location Grandvision 255.255.255.0 inside
ASDM Grandvision2 255.255.255.240 inside location
ASDM Grandvision3 255.255.255.0 inside location
ASDM Grandvision4 255.255.255.255 inside location
ASDM GrandVision_PC 255.255.255.255 inside location
ASDM location LanSweep-XP 255.255.255.255 inside
ASDM GrandVisionSoesterberg 255.255.255.0 inside location
ASDM location Pearle-DC02 255.255.255.255 inside
ASDM location Pearle-WDS 255.255.255.255 inside
ASDM location Swabach 255.255.255.0 inside
ASDM GrandVisionSoesterberg2 255.255.255.0 inside location
don't allow no asdm history
Where is that host (inethost)? Inside of the ASA, or on the internet (on the outside)?
If it is outside, you must configure the NAT for the pool of vpn as you turn on the SAA.
NAT (outside) 1 192.168.75.0 255.255.255.0
-
ASA allows 1 only RAS VPN Client IPSEC
Hi all
I have a strange problem where an ASA 5510 configured for IPSEC - over - udp VPN RAS allows only one 1 customer vpn traffic through.
Other clients can connect successfully (obtain IP/DNS etc., auth using LDAP) but only the all connected client is first able to browse internal resources. Others show 0 decrypted packets when I check the statistics. I have confirmed that it is not a problem with the license that the ipsec default license allows customers up to 250 I believe. Does anyone had this problem in the past?
TKS,
Donavan
It is usually a problem with the translations, which intervened on the NAT/PAT device in front of these multiple machines:
http://www.ciscotaccc.com/Kaidara-Advisor/security/showcase?case=K71102938
Check the translations look correct initially on this device. There should be a translation for each VPN.
There were also a few bugs on multiple clients behind the same PAT, such as CSCse03299, but these had to do with IPSec over TCP connections.
-heather
-
Cisco ASA 5515 two asa firewall ipsec vpn tunnel is not coming
HelloW everyone.
I configured ipsec vpn tunnel between Singapore and Malaysia with asa firewall.
but the vpn does not come to the top. can someone tell me what can be the root cause?
Here is the configuration of twa asa: (I changed the ip address all the)
Singapore:
See the race
ASA 2.0000 Version 4
!
ASA5515-SSG520M hostname
activate the encrypted password of PVSASRJovmamnVkD
names of
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 192.168.15.4 255.255.255.0
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
IP 192.168.5.3 255.255.255.0
!
interface GigabitEthernet0/2
nameif outside
security-level 0
IP 160.83.172.8 255.255.255.224
<--- more="" ---="">
!
<--- more="" ---="">
interface GigabitEthernet0/3
<--- more="" ---="">
Shutdown
<--- more="" ---="">
No nameif
<--- more="" ---="">
no level of security
<--- more="" ---="">
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif test
security-level 100
IP 192.168.168.219 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
connection of the banner ^ C please disconnect if you are unauthorized access ^ C
connection of the banner please disconnect if you are unauthorized access
boot system Disk0: / asa922-4-smp - k8.bin
passive FTP mode
network of the SG object
<--- more="" ---="">
192.168.15.0 subnet 255.255.255.0
network of the MK object
192.168.6.0 subnet 255.255.255.0
service of the TCP_5938 object
Service tcp destination eq 5938
Team Viewer description
service tcp_3306 object
Service tcp destination eq 3306
service tcp_465 object
tcp destination eq 465 service
service tcp_587 object
Service tcp destination eq 587
service tcp_995 object
tcp destination eq 995 service
service of the TCP_9000 object
tcp destination eq 9000 service
network of the Inside_host object
Home 192.168.15.202
service tcp_1111 object
Service tcp destination eq 1111
service tcp_7878 object
Service tcp destination eq 7878
service tcp_5060 object
SIP, service tcp destination eq
<--- more="" ---="">
service tcp_5080 object
Service tcp destination eq 5080
network of the NETWORK_OBJ_192.168.15.0_24 object
192.168.15.0 subnet 255.255.255.0
inside_access_in list extended access allowed object SG ip everything
OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
access extensive list ip 192.168.15.0 outside_cryptomap allow 255.255.255.0 object MK
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 30000
debug logging in buffered memory
recording of debug trap
debugging in the history record
asdm of logging of information
host test 192.168.168.231 record
host test 192.168.168.203 record
Within 1500 MTU
MTU 1500 DMZ
Outside 1500 MTU
test MTU 1500
management of MTU 1500
no failover
<--- more="" ---="">
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 7221.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source SG SG static destination MK MK non-proxy-arp-search to itinerary
!
network of the SG object
NAT dynamic interface (indoor, outdoor)
network of the Inside_host object
NAT (inside, outside) interface static 9000 9000 tcp service
inside_access_in access to the interface inside group
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 160.83.172.x 1
Route inside 10.0.1.0 255.255.255.0 192.168.15.199 1
Route inside 10.0.2.0 255.255.255.0 192.168.15.199 1
Route inside 10.0.11.0 255.255.255.0 192.168.15.199 1
Route inside 10.1.0.0 255.255.0.0 192.168.15.199 1
Route inside 10.8.0.0 255.255.0.0 192.168.15.199 1
Route inside 10.104.0.0 255.255.0.0 192.168.15.199 1
Route inside 192.168.8.0 255.255.255.0 192.168.15.199 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
<--- more="" ---="">
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http serverCommunity trap SNMP-server host test 192.168.168.231 *.
No snmp server location
No snmp Server contact
Server enable SNMP traps syslog
Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
card crypto CRYPTO-map 2 set peer 103.246.3.54
card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto CRYPTO-map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
CRYPTO-card interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Ikev1 VPN-tunnel-Protocol
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
tunnel-group 143.216.30.7 type ipsec-l2l
tunnel-group 143.216.30.7 General-attributes
Group Policy - by default-GroupPolicy1
<--- more="" ---="">
IPSec-attributes tunnel-group 143.216.30.7
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
Overall description
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
<--- more="" ---="">
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:ccce9a600b491c8db30143590825c01d
: endMalaysia:
:
ASA 2.0000 Version 4
!
hostname ASA5515-SSG5-MK
activate the encrypted password of PVSASRJovmamnVkD
names of
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 192.168.6.70 255.255.255.0
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
IP 192.168.12.2 255.255.255.0
!
interface GigabitEthernet0/2
nameif outside
security-level 0
IP 143.216.30.7 255.255.255.248
<--- more="" ---="">
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif test
security-level 100
IP 192.168.168.218 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
<--- more="" ---="">
Interface Port - Channel 1
No nameif
no level of security
IP 1.1.1.1 255.255.255.0
!
boot system Disk0: / asa922-4-smp - k8.bin
passive FTP mode
clock timezone GMT + 8 8
network of the SG object
192.168.15.0 subnet 255.255.255.0
network of the MK object
192.168.6.0 subnet 255.255.255.0
service of the TCP_5938 object
Service tcp destination eq 5938
Team Viewer description
service tcp_3306 object
Service tcp destination eq 3306
service tcp_465 object
tcp destination eq 465 service
service tcp_587 object
Service tcp destination eq 587
service tcp_995 object
tcp destination eq 995 service
service of the TCP_9000 object
<--- more="" ---="">
tcp destination eq 9000 service
network of the Inside_host object
Home 192.168.6.23
service tcp_1111 object
Service tcp destination eq 1111
service tcp_7878 object
Service tcp destination eq 7878
service tcp_5060 object
SIP, service tcp destination eq
service tcp_5080 object
Service tcp destination eq 5080
network of the NETWORK_OBJ_192.168.2.0_24 object
192.168.6.0 subnet 255.255.255.0
inside_access_in list extended access allowed object SG ip everything
VPN-INTERESTING-TRAFFIC extended access list permit ip object MK SG
OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
outside_cryptomap to access extended list ip 192.168.6.0 allow 255.255.255.0 object SG
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 30000
debug logging in buffered memory
recording of debug trap
asdm of logging of information
<--- more="" ---="">
host test 192.168.168.231 record
host test 192.168.168.203 record
Within 1500 MTU
MTU 1500 DMZ
Outside 1500 MTU
test MTU 1500
management of MTU 1500
reverse IP check management interface path
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 7221.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source MK MK static destination SG SG route no-proxy-arp-search
NAT (inside, outside) static source NETWORK_OBJ_192.168.2.0_24 NETWORK_OBJ_192.168.2.0_24 static destination SG SG route no-proxy-arp-search
!
network of the MK object
NAT dynamic interface (indoor, outdoor)
network of the Inside_host object
NAT (inside, outside) interface static 9000 9000 tcp service
inside_access_in access to the interface inside group
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 143.216.30.x 1
<--- more="" ---="">
Route inside 10.2.0.0 255.255.0.0 192.168.6.200 1
Route inside 10.6.0.0 255.255.0.0 192.168.6.200 1
Route inside 192.168.254.0 255.255.255.0 192.168.6.200 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
Enable http serverNo snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
<--- more="" ---="">
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
card crypto CRYPTO-map 2 set peer 160.83.172.8
card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
CRYPTO-card interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
SSH timeout 60
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Ikev1 VPN-tunnel-Protocol
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
<--- more="" ---="">
tunnel-group MK SG type ipsec-l2l
IPSec-attributes tunnel-group MK-to-SG
IKEv1 pre-shared-key *.
tunnel-group 160.83.172.8 type ipsec-l2l
tunnel-group 160.83.172.8 General-attributes
Group Policy - by default-GroupPolicy1
IPSec-attributes tunnel-group 160.83.172.8
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
<--- more="" ---="">
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: endGood news, that VPN has been implemented!
According to the ping problem, my suggestion is to check, if some type of firewall based on host computers on both sides block ICMP requests.
Anyway, you can still use the capture of packets on the inside of the interfaces of the two ASAs, to check if the ICMP traffic is to reach the ASA.
In addition, you can try to enable ICMP inspection:
Policy-map global_policy
class inspection_defaultinspect the icmp
inspect the icmp error
-
Can I use the address of the public by peers as PAT or NAT address also?
With the help of an ASA 5505, I've only private local network IPs and a public IP address from my ISP for the address of the peer. Can I use this same internal peers like PAT or NAT for my private IP local IP address? Remote VPN location policy is to not allow IP addresses private on their local network, so that they want public addresses to me. If possible, could you please show me an example of a config 5505 simple using the following IP addresses? (I need not the IPSec configuration, only the ACL/NAT config)
I have four hosts who need to access a device at the remote location via an IPSec tunnel. They are:
local hosts:
192.168.2.10, 11, 12, 13
Say my public address peer is 205.188.15.34 and the remote peer is 175.10.144.52
remote host:
168.12.10.6
Thanks for any help.
jkeeffe wrote:
Using an ASA-5505, I only have private IPs on the local LAN and one public IP address from my ISP for the peer address. Can I use that same peer IP address as a PAT or NAT for my internal local private IPs? The remote VPN location policy is to not allow private IP address on to their local network, so they want public addresses from me. If that is possible, could you please show me a simple 5505 config example using the following IPs? (I don't need the IPSec config, only the ACL/NAT config)
I have four hosts that need to access a device at the remote location via an IPSec tunnel. They are:
local hosts:
192.168.2.10, 11, 12, 13
Say my public peer address is 205.188.15.34 and the remote peer is 175.10.144.52
remote host:
168.12.10.6
thanks for any help.
Yes you can do it.
the localhosts object-group network
the object-network 192.168.2.10 host
host of the object-Network 192.168.2.11
etc...
list the host 168.12.10.6 ip object-group localhosts allowed VPN access
NAT (inside) 1 VPN access list
Global 1 interface (outside)
Crypto-map list would then look like this-
VPNTRAFFIC ip host 205.188.15.34 access list permit 168.12.10.6
One thing to note. The NAT example above is political NAT IE. If the source is-> 13 192.168.2.10 and the destination is 168.12.10.6 then the source to the public IP 205.188.15.34 NAT. However you may already have something like this in your config file-
NAT (inside) 1 0.0.0.0 0.0.0.0
Global 1 interface (outside)
That is to say. you're natting all your addresses private to the public interface address for internet access in general. If you don't have that then there is no need to do NAT policy and you can't miss those lines that source addresses will be Natted anyway.
the localhosts object-group network
the object-network 192.168.2.10 host
host of the object-Network 192.168.2.11
etc...
list the host 168.12.10.6 ip object-group localhosts allowed VPN access
NAT (inside) 1 VPN access list
Global 1 interface (outside)
Jon
-
Tunnel internal IPSec for an ASA5525?
Hello
We strive to set up an IPSec VPN tunnel at a remote office. Our facility is
Remote Desktop: ISP > ASA5505 > internal servers
Our headquarters: ISP > 3925 router > ASA5525 > internal LAN switch
To Headquarters from all takes place at the router. ASA5525 is pure fire.
My question is, can I assign a public IP address to the external interface of the ASA5525 at HQ and setup an IPSec tunnel between the ASAs 2?
Initially I thought that to establish between the ASA5505 and 3925 but router IPSec tunnel for it, must permit the security for the router which cost us $$$. Try to avoid it.
Please let me know if this configuration is possible.
Hello, Black NInja.
Yes, it is possible to assign the external IP to ASA. There are 2 possible ways:
1. you can link the external IP address to ASA by the line at 3925:
ip nat inside source static [IP_ASA] [External_IP] extendable
2. you can use PAT, if you have only 1 external IP address. The lines for her:
ip nat inside source static tcp [IP_ASA] 51 [External_IP] 51 extendable ip nat inside source static udp [IP_ASA] 500 [External_IP] 500 extendable ip nat inside source static udp [IP_ASA] 4500 [External_IP] 4500 extendable
Best regards.
Maybe you are looking for
-
Hello! The following error occurs: as soon as I try to 'right click' to access the context menu of folder, file, hard drive, or everything just on desktop for the first time after a reboot, the spinning wheel is displayed for 5 to 10 seconds and then
-
Satellite P500 - AutoPlay message
I have a Sony memory card in my Satellite P500 dedicated to ReadyBoost. It seems to work very well, but there is a minor irritation. Quite often (= several times a day) an autorun message appears on the screen asking if I want to see the files on the
-
Cannot print using HP photosmart C3100 printer
Original title - printer problems? I have a HP photosmart C3100 printer. It has been giving me problems in the sense that whenever I turn it on it would be the test of the printer which is routine, each time you insert a new cartridge. I opted to lea
-
Analysis of chain to get the Timestamp, LV 2012 problem
I have a VI I wrote in 2013 LV where it works very well. But with the same VI in LV 2012SP1, analysis of string to get a Timestamp does not work. Attached is the VI recorded in LV2012 SP1. Background: I work with an FPGA where I am synchronizing pu
-
I need to establish a vpn connection between my office and a computer over the internet, allowing access to the internal of the outside lan. I have a problem with my router and I am looking for a new. Can I use x 3500 to establish a pptp vpn tunnel o