How to use a SELECT QUERY using fdmAPI.executeDML in the Jython Script FDMEE?

Similar Questions

• How to use JavaScript to limit the number of boxes to check the user can select a PDF form?

  How to use JavaScript to limit the number of boxes to check the user can select a PDF form?

  Here's the working solution

  Please rename all the boxes like chkBox0, chkBox1... .chkBox30 (must start with 0)

  Value of exports of each checkbox must be "Yes" (default value is Yes)

  Place this Code at the level of the Javascript Document

  -Code JavaScript document-

  var counter = 0;                Checked the meter

  -Count boxes checked again when the document is closed and reopened.

  for (var i = 0; i)<= 30;="">

  If (getField("chkBox"_+_i).value == 'Yes') {}

  Counter += 1;

  }

  }

  -The function of validation-

  function validateCheckBox(name,value) {}

  If (value == 'Yes' & meter)<>

  Counter += 1;

  } else if (value == 'Off') {}

  counter = 1;

  } else {}

  getField ("name") .value = "Off";

  App.Alert ("you can select only four checkboxes");

  }

  }

  -End of Document Javascript-

  Now put this line in the MouseUp event all checkboxes

  Box - Code MouseUp event.

  validateCheckBox (event.target.name, event.target.value);

  //----------------------------------------------------------------------------------

  Hope this will help

  Kind regards

  Post edited by: Mohammad Irfan

• I got a license number for Adobe Master Collection from my school (Stevens Institute of Technology) and I can't understand how to use it to obtain the product. I created a user name and this is as far as I'm away.

  I got a license number for Adobe Master Collection from my school (Stevens Institute of Technology) and I can't understand how to use it to obtain the product. I created a user name and this is as far as I'm away. I need to download the product and I may not know where to start.

  Ask someone to your school... You have a Cloud redemption code, or a number of series CS6?

  If cloud, http://helpx.adobe.com/x-productkb/global/redemption-code-help.html Redemption Code and

  http://www.Adobe.com/products/creativecloud/FAQ.html

  http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq

  What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

  If CS6, download to other downloads and enter your serial number when prompted

  Once again, your 1 resource is your school

• How to use JavaScript to change the named view

  How to use JavaScript to change the named view

  Do you mean to jump to a specific Destination named within a PDF file? SE so there

  the method gotoNamedDest of the Document object.

• How to use CSS to create the horizontal navigation bar in Dreamweaver CS6

  How to use CSS to create the horizontal navigation bar in Dreamweaver CS6

  One of the ways to do this is the following: Editor Tryit v1.9

  You can also use floats to get something in the same direction.

• You can use variable substitution in the Calc script.

  Hi guys,.

  I want to use variable substitution in the calculation script. I v_SECSUBAREA that my substitution variable and its value would be like C12.00 or C13.00 or C12.00, C13.00.

  But it gives me error mentioned below by checking the syntax of the calculation script.

  Error: parsing formula [statement of DIFFICULTY] (line 15) 1200315 error: invalid object type

  Calculation script:

  -----------------------------
  

  FIX (& v_CLEARYEAR, & v_CLEARMON)

  FIX (& v_SECSUBAREA)

  DIFFICULTY ('REPGBP', 'REPEUR', 'REPUSD', 'local', @DESCENDANTS ("DIVISION"), @LIST(&v_SECDNBENTITY), @DESCENDANTS ("SubAnalysis"),

  @DESCENDANTS ("RTNROW"), @DESCENDANTS ("RTNCOL"))

  CLEARDATA "RESUB."

  ENDFIX;

  ENDFIX;

  ENDFIX;

  Variable substitution:

  ----------------------------------

  PRC

  COR_ALL

  v_SECSUBAREA

  C12.00

  Calculation script does not have C12.00 as the value for the variable substitution. If I give FY15 then Script gives me a correct syntax.

  Please help me to get this resolved.

  Thank you

  Shruti

  Hello

  Assuming that you calculate in the PRC. Database COR_ALL.

  You may set the C12.00 value in quotes like "C12.00".

  Kind regards

  Philip Hulsebosch.

• How to run a Select query stored in a Variable

  Hello
  
  I have a following requirement:
  
  Select a query result on Var1, result of another request selection in Var2,
  If Va2 = "value11" or Var2 = "Value2" then Var1 = "select query. Now how can I run this SQL at the end of the Pl/SQL query?
  
  so I write request for the same thing:
  
  DECLARE
  qry nvarchar2 (500);
  result nvarchar2 (500);
  
  BEGIN
  
  Select "choose TEXTVAL as 'CHARGER' FROM TABLE1 WHERE LOC =" [ParameterValue] "and KEYNAME =" < < REPLACE > > "' double INTO qry ;"
  
  SELECT CASE County WHEN (RW." CountofBATCH') > 1 then "mixture."
  WHEN count (RW." CountofMAT') = 0 then 'None '.
  ANOTHER 'other '.
  END
  AS a result
  TABLENAME2 TT, XMLTable ('/ sets of lines/lines/lines ' PASSAGE TT.) XMLCOL
  COLUMNS
  "CountofBATCH" PATH "/ row [CLABS > 0] / LOADED ',"
  "CountofMAT" PATH "/ row [MATNR = '[parameter value]'] / MAST '"
  ) AS RW
  
  where
  TT.PL = '[parameter value]' and
  TT. TANK = "[value settings]";
  
  IF result = 'Mixture' result GOLD = 'None' THEN
  qry: replace = (qry, "< < REPLACE > >", result);
  on the other
  qry: = 'nothing. '
  END IF;
  
  Thus the qry variable will have select statement. Now how can I use this to get the select result of this statement in the same query qry?

  You can use execute immediately if the output of the query is in the same query.

  It's very simple.
  a query string signle and then go like this

  declare
  qry VARCHAR2 (255);
  result varcharf2 (2500);
  number of vempid: = 1;

  Start
  qry: =' select empname emp where empid =: empid ";

  run immediately qry in the result using vempid;
  -now the result of data is as a result
  end;

• How to use an index with the clause 'in '.

  Hi all
  
  I have a sql statement with "" * in the clause * "."
  
  for example:
  

  select emp_id from emp where ename in ("vikas", "krishna", "John", "scott");

  When I check the plan explain he uses the index here even if the statistics was entered. He always goes for the full table scan.
  There is an index created for the ename column.
  
  Please tell me a technique on how to make use of the index here.
  
  
  Thank you and best regards,
  Vikas Krishna

  Vikas,

  What version of Oracle you are running.
  CLAUSE IN will use the index as appropriate.
  In your example Optimizer may decide to use FTS (Full Tablle Scan) for various reasons. May be that the table is very small.
  SE for example below where he uses an index on the CLAUSE IN...
  The essential point being that I made "wide enough" table (in this case including a column of type CHAR) makes use of INDEX more effective than a FTS.

  select * from v$version where rownum < 2;
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  
  create table bigt (c int, s char(100));
  
  insert into bigt select level, 'X' from dual connect by level < 501;
  
  create index bigt_in1 on bigt (c );
  
  exec dbms_stats.GATHER_TABLE_STATS('SUDHAKAR', 'BIGT');
  
  explain plan for select c,s from bigt
  where c in (1,2,3,43,5);
  
  select * from table(dbms_xplan.display);
  
  PLAN_TABLE_OUTPUT
  
  Plan hash value: 238667275
  
  -----------------------------------------------------------------------------------------
  | Id  | Operation                    | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT             |          |     5 |   520 |     3   (0)| 00:00:01 |
  |   1 |  INLIST ITERATOR             |          |       |       |            |          |
  |   2 |   TABLE ACCESS BY INDEX ROWID| BIGT     |     5 |   520 |     3   (0)| 00:00:01 |
  |*  3 |    INDEX RANGE SCAN          | BIGT_IN1 |     5 |       |     2   (0)| 00:00:01 |
  -----------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     3 - access("C"=1 OR "C"=2 OR "C"=3 OR "C"=5 OR "C"=43)
  

  VR,
  Sudhakar B.

• How to use a function inside the package?

  Hello
  
  You will need to convert weight unit of kilogram kips when filling out the weight values into a temporary table. In our database, schema there is a function called convert_units is available.
  How could I use this feature in my package? My package is also resides in the same database schema.
  
  Here, I pasted the function.
  

       convert_units
     (
       in_base_unit_id       NUMBER,
       in_conversion_unit_id NUMBER,
       in_value              NUMBER
     ) RETURN NUMBER AS
  CURSOR unit_cur IS
    SELECT *
    FROM units_conversion
    WHERE base_unit_id = in_base_unit_id
      AND conversion_unit_id = in_conversion_unit_id;
  unit_rec unit_cur%ROWTYPE;
  BEGIN
    OPEN unit_cur;
    FETCH unit_cur INTO unit_rec;
    IF unit_cur%NOTFOUND THEN
      unit_rec := NULL;
    END IF;
    CLOSE unit_cur;
    RETURN (in_value+unit_rec.pre_adjust_add)*(unit_rec.rate);
  END convert_units;

  Hello

  It seems that the first two arguments of this function are ID in the units_conversion table. If you know this id = 1234 means kilograms, 9876 means kips, then you can do things like:

  wt_kips := convert_units (1234, 9876, wt_kilograms);
  

  or

  INSERT INTO tmp_table ( ..., weight_val,                               ...)
         VALUES           ( ..., convert_units (1234, 9876, wt_kilograms), ...);
  

  I can't just look at the code which could be any valid ID. I'm not even sure of the order of the arguments. I hope you have instructions on how to use the function.

  If the function is in a package named pk_xyz (a different package to the one in which you call it), add the name of the package, like this

  wt_kips := pk_xyz.convert_units (1234, 9876, wt_kilograms);
  

• Satellite L550-117 - how to use VGA + HDMI at the same time?

  Hello
  I have a Satellite/Satellite L550 series Satellite L550 - 117.
  Can I use 2 monitors at the same time, using the function key (laptop screen + HDMI, VGA + HDMI, VGA, portable computer), but I would use "laptop screen", "VGA output" + "Output HDMI" at the same time (for example: to play a movie on an HD TV and work on the other two screens).
  I also want to play sounds on computer speakers 'and' an HDMI output, not the speakers for computer 'or' HDMI.

  Is it possible with this notebook and how?

  Thank you

  Hey Buddy,

  Good idea you have unfortunately it of not possible to use 3 monitors at the same time. You can use the internal monitor and an external monitor but not the two external monitors. This is not supported in the graphics card.

  Then, you use internal monitor, VGA connection or internal monitor + HDMI connection. That s what you can do.

• How to use Labview for measuring the reflectance at different wavelengths automatically

  Hello!

  I'm using labview to communicate with MS257 (a monochromator). If I do not use Labview, I have to use the hand controller (set a wavelength from 300 to 1100 under a grating (a total of four grids).) It takes a lot of time. So I want to use labview to realize the automation. But I don't know how to do, I still can put only a wavelength as a command for MS257, not making any difference.

  Does anyone know how to deal with this?

  Thank you for your time.

  So where are you stuck? It is a fairly common task. Inside of a loop, you can increment the "xxx" and build a table of responses. Look at the Format function in the chain and a knot of shift register/feedback.

• How to use NIDAQmx to determine the number of lines correlated DIO?

  How can I used NIDAQmx to determine the number of correlated DIO lines that supports a device?  For example, the NI6225 supports 8 correlated digital of/s lines while the NI6229 supports 16 correlated digital of/s lines.  How can I used NIDAQmx to determine the NI6225 supports only 8 lines while the NI6229 supports 16 lines?

  I moved this question from a previous thread.

  Thank you

  Ian

  Here is a code snippet that implements the regular expression detection:

  

• How to use a structure of the event in a Subvi

  I am using a structure of the event within a Subvi.  The Subvi has a table constructor that built tables and the structure of the event is used so that when the program runs, it allows you to change the elements of the array.  It works, but when I apply within a Subvi, it does not work properly.  This goes into a Subvi, because it will be part of a much larger progrram, so it must be modular.

  If you are using a structure of the event, it is not a Subvi.  If you worry about modularity, you should not use the structure of the event.

  You seem to have a fundamental misunderstanding of modularity.  An event structure must be placed in a while loop.  If you have a while loop in a Subvi, you have transferred control of your program to the Subvi.  You are not at this stage modular.  Your higher level GUI has no control.  You would have to create a stupid system of variables to pass data down to the loop to stop the loop and return to your main VI.  This is not a good design decision.

  Instead of searching for a way to make something broken, you should spend effort trying to understand what you really want to accomplish.  You should also spend some time to learn how to work the event structures.

  This application is small at the moment and it is already on the way to the unreadable.  It's a terrible thing to do for you.  Break these habits now.  variables are only when absolutely necessary.  Using subVIs to accomplish individual tasks, do not run the entire application.  With the structures of the event, use a value of stop button change event for will not be held hostage to the time-out.  If your variable is '2' in it, you're doing something wrong.  It has to be something different between set points, put it in the name.  If you want to make the subVIs, create an icon.

  But first and foremost, invest time in understanding dataflow

• How to use Labview to control the motorized turntable?

  Hello

  I am new to Labview and do a project that requires the use of labview to control the motorized turntable (XYZ axes). I need to use the Labview programming and have no idea at all. Need help, thank you very much!

  Lei,

  Everything said by others is correct and to do because they describe, at a given time. But I always approached these projects of motion control first by looking at the 'motion controller' (I hope you have a) and 'drivers' (what you need) between the computer/LabVIEW and engines decide what communications will be required for these devices and get an idea of the syntax of command and the language to use with them.  In some cases, the controller and the motor driver are integrated in a single unit. Heck, in some cases, they are even integrated with each engine.

  The motors can be the stepper motors or perhaps servomotors.

  In the case of drivers stepper (devices that provide power electronics to run the engines), many of them are run using only two control signals for digital called 'step' (a pulse train) and 'direction' (high-low level) and if it is possible to generate directly with the PC, it's an order of magnitude easier (if you have not already a library of available motion control to manage the generation of these signals and) the execution of the stepper motors) of having a "Motion Controller" between the PC and the "motor".  Engine drivers step by step usually can be configured that current engine and the size of the stage and sometimes for the other plus-moteur/driver-parameter setting. The configuration of these can be made with jumpers, switches or, for some drivers, with orders ASCII on some sort of port of communication, but in general these are values you download the installer once at the beginning and then never touch again if you do not need generally to have a full time available on their change communication path.

  In the case of the actuator drivers (once again the devices that provide power electronics to run the engines), many use a +/-10V control input analog signal, and, again, while it is possible to generate the signal directly with the PC hardware, a separate axes controller is usually much simpler and more robust.  In the case of a servo system, there is also a signal back to an encoder or resolver attached to the engine to be used by any device will exercise the motion controller in the system.  There are once again associated with the driver configuration parameters (and controller in this case, since it is part of the servo feedback loop) which must be configured at the start but once set up properly, they rarely need to be changed again.

  A movement controller which is separated from the PC often manage several drivers, and can often coordinate a movement between them. It will load the rise up/down of the engine speed as that changes. It will be followed by position of each motor. The servo system, but it will take the feedback signal and use it to adjust the speed/position/torque of the engine. The motion controller also deal with race and home or index of signals is usually on most lines of movement and provide information of the State of the switch to the PC.   To run the motor controller is then just a matter of chaining a set commands of (usually ASCII) to indicate how fast to run and how far to go (and direction) and by sending a command "do it." Then, ask you to keep track of the status of the process and the States of the switches.

  In many cases the builders of controllers of movement are a primitive way to communicate with the controllers of a PC with no additional software other than what they offer. With this you can at least have an idea of how different the controller commands and responses they produce. That you can start to build sequences of commands to perform the actions you want.

  You can then add LabVIEW to the mix and to understand how you can get it to send sequences of similar orders on the paths of communication that are available and respond intelligently to the information it receives in return for motion control.

• How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

  How to use windows scan with my new canon MX 922 printer.  It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks

  All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation.  If not followed exactly the probability is that the scanner will not work.

  Canon: http://www.usa.canon.com/cusa/consumer

  Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?

  J W Stuart: http://www.pagestart.com