How to use Airport Extreme with ethernet leased line

Similar Questions

• How to configure Airport Extrem with OS El Capitan?

  Hello, I need help to set up airport Extrem with the OS X El Capitan. The system always show the same question:

  

  You will not be able to administer the old 802.11 g with your Mac OS X El Capitan AirPort base stations.

  Basically, you have three options:

  1. Replace the Express with a newer 802.11n model.
  2. Use a Mac with OS X Lion or earlier version.
  3. Use a Windows XP or Windows 7 PC.

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• How to use Time Capsule with Time Machine and no Wifi

  Situation.  Late 2009 iMac with OSX 10.7.5.  Used Airport Extreme since purchase in early 2010.  Use a modem cable from Arris SB 6141.  Decided to upgrade to 2 TB Time Capsule.  And the problems started.  I put TC in place... Finally, with the help of the people of this forum (thanks).  Transport CANADA does not have the internet connection to the Modem.  New to this forum I discovered that the TC does not like the SB6141.  So I put the Airport Extreme in the network and work like a charm wireless.

  Now, how can I connect the TC to the network or the Mac to use the part Time Machine?

  I tried to put the TC in Airport Extreme with an ethernet cable.  First, the iMac would not recognize the local network by removing printers and the other external USB drive; and my TV got confused on what wifi network with the same name in which to connect.

  Before I hit the reset button on the time Capsule I tried to ask what would be the right steps.

  Thanks to the folks on this forum. Thanks for your help.  Hope you all a good holiday this year.

  You should not have really big questions on Lion.

  Connect the WAN of TC port on the ethernet port LAN AE.

  Configure the TC in bridge. I disable the wireless to EI and let it run in the TC... that's much better work in this configuration.

  The Mac that will backup must really be connected to the TC in direct wireless or ethernet... This will help loads.

  The wireless work better on the TC... If it isn't, then you can swap EI... but I'd be surprised if that was the case.

• Extend an AirPort Extreme with a Terminal AirPort Express increasing the number of users?

  I have an AirPort Extreme 2 years ago. Based on the technical page of the product, the router can theoretically connect up to 50 users. That's more than enough if used at home.

  However, I intend to deploy a network of airports in our new office building and we have more or less 50 employees. Because everyone has a smartphone that it needs to connect, I try to at least 100 users/devices. Which includes all the network printers. Obviously, an AirPort Extreme is not enough. Another thing, I have considered is that the office building is 2 floors and all the walls are made of concrete, which means the distribution of the wifi signals is affected.

  I thought to extend an AirPort extreme with 3 more AirPort Expressare (mobile network). It's 2 APs on each floor. That should solve the problem of distribution wifi. I'm not sure the first problem - 100 or more devices into a single network.

  So extending an AirPort Extreme with 3 more AirPort Expressare (making a roaming network with 4 access points) increases the number of potential users of 50 to 200 (assuming that each access point can connect to 50 users)?

  In theory, Yes.  But you must take this specification of 50 users with a grain of salt.  Once there are 20-25 users on the same airport access point, things will slow down significantly. The system will operate as of cold molasses with up to 50 users on the same access point.

  Quite frankly, in a business application, you need a software router. Apple routers are designed for home use.

  Another way to say the same thing, is that Apple does not routers Apple at the Apple Store. Who could tell more than anything whatsoever about the suitability of the products in your proposed network.

  My advice would be to get an IT professional in and review your needs... before you move further.

• Airport Extreme with a USB hard drive

  I have iMac, retina runs El Capitan, I have a fairly new Airport Extreme 6.3.6 running.  My desire is to attach a USB drive and have available files can I access any of my computers.  Also have old iMac and a MBP (about 2012 or 2013).  All three are attached to Airport Extreme, through ethernet cables.  I use the wireless for iPhone and iPad, not for computers.

  I have a Seagate 2 TB hard drive. I connected directly to the latest iMac and all is well. Get the connect to Airport Extreme, it does not appear in the Finder.  After reading several articles I tried to install this on a powered USB hub and the HD in it.  Still does not appear in the Finder.

  I tried to reformat the hard disk, but would not be able to afford it. I have app NTSF on iMac.

  I hope that's enough detail for someone to offer assistance.  Please, I beg you!  -Kathy

  You need to connect to a computer and reformat the drive as Mac OS extended (journaled). AirPort Extreme cannot read USB drives to NTFS or exFAT format.

  (138541)

• How to use spell checking with magic mouse

  How to use spell checking with magic mouse

  Hello

  The mouse is not intended to be used with the spell checker.

  The mouse settings available in system preferences > mouse

  Spelling and grammar can be checked in the Edit menu in most applications.

  In addition, shortcuts keyboard.

  Command:

  And the command;

• The Airport Extreme with Time Machine and HD 1 t

  I have an Airport Extreme with built-in hard drive of 1 t. My iMac has a 1 t hard drive too. Time Machine has successfully supported the HD integrated for a few years now, but he can't. The message said: he needs 2.7 T. Why would it need to back up a hard drive of 1 t?

  I have a few other connected external drives but I made sure to remove them from the Time Machine backup list, so everything there should be backup is the HD 1 t, which still has unused space on it. Anyone have any ideas?

  I have a few other connected external drives but I made sure to remove them from the Time Machine backup list

  I think that you include perhaps instead of with the exception of the...

  If you look at time Machine... the list of disks, you should have is excluded... If remove you it from the list of the excluded, they are included...

  It is opposite to almost anything else, I saw where you include on the list of things.

  In this menu area, you must have all of the listed external hard drives. Because they are excluded not included... If your list is empty as mine... then all are INCLUDED.

  

• How to use windows update with browser firefox4

  How to use windows update with browser firefox4

  You MUST use Internet Explorer to access http://windowsupdate.microsoft.com.

• How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

  How to use windows scan with my new canon MX 922 printer.  It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks

  All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation.  If not followed exactly the probability is that the scanner will not work.

  Canon: http://www.usa.canon.com/cusa/consumer

  Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?

  J W Stuart: http://www.pagestart.com

• How to remove a shortcut with the command line?

  How to remove a shortcut with the command line?

  How to make a backup of the local users and groups with command line?

  You delete a shortcut, just as you would remove any other file.  A shortcut will end with the extension ".lnk".  So assuming you are trying to remove the shortcut named "Shortcut.lnk" which appears to the user 'Bob's Office, you use the button Delete (del) or 'clear' command by specifying the full path to the file.  (Remember to put filename in quotes if there is a space anywhere in the path or name) as in:

  del "C:\documents and settings\Bob\Desktop\Shortcut.lnk".

  What kind of a backup 'users and groups' you want to do?  If there is a backup of the users and groups as written in the registry, a good registry as C:\WINDOWS\ERUNT backup program that will make the command line.  If you are trying to backup all users and their data as well, then you are better off with a backup program.

  HTH,
  JW

• How to extend a WiFi router network not Apple using Airport Extreme and Express?

  My cable ISP company just gave me a new modem/router - a DG of Arris - 2470. For the last two years I used a cable modem independent older with a connected Airport Extreme (both located on the ground floor) and an Airport Express station on the floor as an Extender. I was very happy with the power of the signal around the House.

  Since his arrival to the Arris router my signal has become very low to the floor. I would use my two Apple devices to extend/boost my network, but do not know how to do this.

  Thank you!

  Basically, you have two options:

  1. (Best overall performance of the network) Connect the extreme and Express on the Arris Ethernet gateway device and configure all for a traveling-type network. This would require an Ethernet connection between all routers that can be accomplished by either using Ethernet cable or the use of mains adapters.
  2. (The overall performance of the adequate network) Simply connect the extreme to the Arris Ethernet, then extend the extreme using the Express.

  Which of these do you prefer?

• set up a branch to the main ethernet using Airport Extreme network

  Could someone help me with this network configuration please?

  I rent an office and we have an ethernet cable coming into our building to the main network (a fiber broadband building next door). The ethernet line give you IP addresses and internet link.

  I would like to set up our own network in our building-

  1 / would put an Airport Extreme there is the ethernet cable and then plug the cable into the WAN port

  2 / I would implement the EA to distribute IP addresses, but using a different pool - so if the main building uses 192.168.1.1 to 192.168.1.256, I would be created my AE to use 10.1.1.1 to 10.1.1.256

  3 / I would then run an ethernet cable between the port LAN on EI to my Netgear 24 port switch.

  4 / I would connect all our other airport extreme and express again our Ethernet switch and put them all to 'bridge mode '. The switch ethernet cables may be connected to the WAN ports on these airports.

  Anyone see any problem here? We would just to have control over our own IP addresses and be able to restart our Airport Extreme, if we must, do not rely on the building next door to the distribution of intellectual property. I know still need to answer on them for the internet connection, but that's fine.

  Thank you!

  It should work. It would be the basis of a network of mobile type.

  A word of caution. With the exception of the "main" AirPort Extreme that performs as a router, connect the other base stations using their respective ports of LAN. We found some inconsistencies when a base station is in bridge mode and the connection is their WAN port.

• I get my internet through a Repeater.  There is a POE carrier then online, then a router adapter yet.   Can I use an Airport Extreme with POE to improve my WiFi range?

  I live in Baja California Surinamese no cable.  You want to improve WiFi.  Not sure how to interact with a POE.  Tried to set up the airport without a bit of luck.  Appreciate some feedback.

  If the connection between the POE (Power over Ethernet) device and the AirPort Extreme is a wireless, then you will not be able to extend the network Wi - Fi of the OCB in the extreme. This is possible with an another AirPort base station.

  In addition, only a particular model of the base station AirPort Extreme POE supported wired connections. It was discontinued in 2007 and is model # A1034.