How to use chkdsk to Scandisk?

Similar Questions

• How to: Use CHKDSK to correct errors on a disc

  Original title: in CHKDSK I will meet 'read only' how can I change this?

  Trying to repair corrupt disk problems, but read only mode stops the action of chkdsk.

  Hello

  read this tutorial on how to use it

  How to run the check disk at startup in Vista or Windows 7

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

• How to use the chkdsk command in windows 7 its not working not not his poster error access denied

  Please help me about the chkdsk command to remove the windows command prompt 7...

  If you try to use chkdsk for C:\ partition, you cannot run that the disc must be disassembled for the operation, which is not possible with the C:\ partition (or the partition where Windows is installed).

  Instead, go on-> do work right click on the partition-> click Properties-> in the Properties dialog box, go to the Tools tab-> under error-checking, click check now... This will automatically set a check the next time you start Windows.

• Unable to defragment error: (C) defragmentation has been abandoned because of contradictions that were detected in the filestem. Please run CHKDSK or SCANDISK on (C) to fix theses inconsistansies

  Original title: error Defragmenter

  Whenever I try to defragment I get a message saying the following... to come (C) defragmentation has been abandoned because of contradictions that were detected in the filestem. Please run CHKDSK or SCANDISK on (C) to fix theses inconsistansies. Then run disk fragmenteur.

  It may be something to do with Microsoft because it says I don't have add on, but I don't know

  I have windows XP, if that helps.

  E-mail address is removed from the privacy *.

  Thank you very much

  Hi IainFisher,

  Thanks for posting in Microsoft Communities. Of the description of problem I can understand that you are not able to run disk defragment. Provide the following information to understand the issue:

  ·         Did you do changes on the computer before the show?

  ·         Reason why you want to run disk defragment?

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to defragment your disk Volumes in Windows XP

  Method 2: Follow the steps in the article to run the check disk for errors.

  How to perform disk error checking in Windows XP

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  I hope this helps.

  Thank you.

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I used chkdsk after trying to do a defrag and send a message that there was an error on the disc.

  original title: computer Dead after chkdsk

  I used chkdsk after trying to do a defrag and send a message that there was an error on the disc.  Asked me to use chkdsk after a statup as a volume is in use.  I did it but when I went through the suite, the computer was completely dead.  I think I gave the wrong settings of the chkdsk command.  How can I get my computer operational again?  I use Windows XP

  What do you mean by 'completely off '?  Is - literal?  All in all, nothing happens when you restart the computer?  No noise?  No fans? No beeps?  No video, no BIOS or POST information appear?

  John

• How to use FaceTime with Siri

  I you would Siri have been able to dial phone numbers using FaceTime, so my question is, is it possible? And if so, how?

  Hey MichaelnAvallone,

  Thank you for reaching out to help through Apple Support communities. Looks like you are wanting to make calls FaceTime with Siri. If so, I'd be happy to explain how to make this happen. First, you'll want to press on and hold the Home button or say "Hey Siri" to activate Siri. Then, for example, you can simply say, "make an audio call FaceTime to MOM" and Siri will only start a FaceTime call audio. If you say 'FaceTime Mom' Siri will begin a FaceTime call with video of this contact.

  The link below shows the ways to learn how to use Siri.

  Use Siri on your iPhone, iPad or iPod touch

  Kind regards.

• How to use iCloud

  HI, please help a total techaphobe. I need to store my photos in iCloud (that is already installed on my iPad, I have Apple ID n all). I tried to select the photos, but there is no option, then save in the cloud. Perhaps they are there already as the AutoSave is enabled, in which case, I need to have access to make sure that there so I can remove from iPad. There is nothing in "iCloud Drive" (I have no idea what Drive is in iCloud). All I can find on the line is either too complicated (it can not be that complicated) try to put myself in place (which I am already), or is completely irrelevant, even the things in apple support. I'm sure it's there somewhere, but it seems that I have to trawl through so much, I hope one of us guys can help me with a frank explanation...

  Go to iCloud.com on a browser and click the Photos app to see if your photos are indeed already in iCloud.  You can also check the Photos app on your iPad as well.

  Another thing to note, you can't delete photos from your iPad, because, unfortunately, is not how iCloud works.  It's a synchronization service and not an archival.  There is not your traditional cloud based.  Which means that it syncs your data on all of your devices that have them at your disposal.  Remove a device and it went on all devices.

  Hope that helps.

  How to use iCloud drive

• How to use audio only AirPlay on iOS10?

  HI guys, maybe I'm stupid, but I can't find how to use streams of music after upgrade.

  UseCase:

  -listen to music through headphones on my way back

  -When reached on home stereo and activate AirPlay

  iOS9 - low slide menu - AirPlay - Audio sent to Apple TV and stereo, play music (took about 3 seconds)

  iOS10 - slide down menu - AirPlay - there is only activate AirPlay with mirroring. That is originally for my TV to turn on automatically and also phone is drained and you know - I want to use only phone no stream all on television.  (Past 10 minutes, and can not find how to do this)

  Any tips?

  Hello Tomas Vrabec,.

  Thank you for using communities of Apple Support. Information you provided, it looks like you are unable to use AirPlay to play only mirroring content after upgrading to iOS 10. Surely, I understand your concern, especially since it worked as you need on the previous version of the software. I'm happy to help you.

  Looks like you are taking the correct steps. First of all, I recommend you restart. This can solve a lot of unexpected errors. Use the restart below steps if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo

  Restart your iPhone, iPad or iPod touch

  If the problem persists, please use the steps and pictures in the link below for more information on troubleshooting:

  Get help with AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch

  Have a wonderful day!

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use and control the tabs?

  Sorry for such a general question, but I use Firefox with older versions of Mac OS x for years and have just been struck by this brand new and I have no idea on your tabs, "new tab page" etc. Can you just send me some documents so I can understand what they are and how to use them?

  All I see on my headers Ff are all sorts of legs that have no relevance to me, like 'how to stop Firefox from... '. "(twice), a few other symbols Ff and other"tabs"I don't know everything." All the do is filling up a bar line.

  Thank you-

  You are welcome.

  If you have any other questions feel free to ask them.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• Double mail.ru autification how to use mail.ru account?

  I have double autification of mail.ru , phone number.
  And I need to use Thunderbird.
  How do I?

  Thunderbird does not work with the authentication of step 2. Ask your provider how to use their service with a normal email client. An account Google can generate what they call a specific Application password. Maybe your provider has something similar.

• What is the menu item "Bring everything to the front ', and how to use it?

  What is the menu item "Bring everything to the front ', and how to use it?

  It's a selection in the window menu and means to bring all open windows of this application at the front and push all the windows open for other applications behind. This makes access to the easiest application windows. However, if you don't have that one window open in an application, then the menuitem does nothing.

• How to use an install.xpi configuration file to configure email data

  Manual installation of my e-mail account failed because Thunderbird search my domain name and is not in its database. If my webhost gave me a file of automatic configuration for Thunderbird for my e-mail, called install.xpi - account but how to use this file? I can't double-click them in Windows to do anything. Thunderbird program, he wants to create a new account, but I can't do anything else in it as importing files.

  How to use the install.xpi file so it creates my e-mail account with the appropriate configuration variables? Thanks for your help.

  Launch Thunderbird, close the wizard, goto the Add-ons, select Tools menu (alt + T)

  There is a small button to the left of the search window. Click this button and select install module file and navigate to your xpi file, select it and you leave.