How to use encryption?

Similar Questions

• Learn how to use encryption

  I synchronize the contents of My Documents on my computer at home with my USB and am concerned about the security of content om stick. I thought that encryption would be a solution.

  I created a test folder with some files which I have encrypted. Encryption seems to work OK, as the color of the file names change to green. I then synch'ed content with my stick, took the stick on another computer, and unfortunately, I read the "encrypted" according to normal files. The two computers can connect different usernames.

  The content of the stick should have course? What am I doing wrong please?

  The cause could be linked to the fact that a 'snap-in' certificate is not visible in the user account. Should it be? If the problem is caused by the fact he is not a digital certificate installed, so why not XP is asking me for the location of the certificate before she proceeded to encrypt?
  TIA... Greg

  To add a bit of observation of Wunders it is possible to lose data if you use EFS, if you decide to use EFS, make sure to read and follow the best practices for EFS file system .  If you have no certificates backup or a specified recovery agent, sooner or later you will lose data.

  If the key pair is lost or damaged and that you have not designated a recovery agent, and then there is no way to recover the data.

• How will I know if I use encryption 128-bit internet explorer 9 on windows vista

  How will I know if I use encryption 128-bit Internet Explorer 9? I use Windows Vista Home Premium Service Pack 2 with a 32-bit operating system.

  Hello littleturley99,

  Open internet explorer 9 and look in the upper right of the window. You will see an icon of the House, star and a wheel of gog. Click on t he cog icon wheel, and in the drop down menu, click 'about internet explorer '. Look in the window of internet explorer for the "force encryption". This should read 256 Bit.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to use 3DES and RAS

  Hi all I have need to write encryption and decryption using 3DES and RSA .can any please tell me how to write this.

  I thought that the examples given are clear enough.  For example, the method you gave

  Encrypt (plaintext byte [], int ciphertextOffset, int plaintextOffset, byte [] ciphertext)
  crypt encrypted just bytes of plaintext into ciphertext, from plaintextOffset put the bytes from ciphertextOffset.  Little about exactly what the JavaDoc says!

  If you do not understand how to use a specific encryption algorithm, then the code will be confusing.  In this case, I suggest that go you through the external documentation on these algorithms and they way they should be used, before looking at the code.  Search the internet, there is a lot of information on these algorithms out there.  And there is lot to understand, with the filling and the different approaches to block, which complicates the basic encryption code.  And it's just 3DES!

  But if you are struggling with a specific part of the code, please feel free to paste it here and ask about it.

  BTW, the code examples are related to each of the class pages, read the documentation at the beginning for the links.

• How do use ACS to enycrption for his backup?

  How do use ACS to enycrption for its backup system?

  Bruce,

  GBA backup is encrypted with 40 RC2 - RC2 40-bit encryption method. Encryption

  option to encrypt more data already encrypted for transmission

  between ACS and the ftp server.

  Kind regards

  ~ JG

  Note the useful messages

• secure servers and encryption. How to deploy encryption for my site?

  Can someone help me. I want to prove my site do not contain any harmful bugs and you need to use encryption. How can I go about it?

  Since he did no effect on their safety and it has little or no impact on SEO (AGAIN!) not any time soon, but as with all BC web know that they must do at some point.

  Don't talk while a few months here.

• How to use setFireActionForSubmit with the settings and capture the parameter

  Hello
  
  Can someone explain how to use setFireActionForSubmit.
  
  I extend the ShoppingCartPG controller. In the extended controller processRequest method I am adding a button to the table and implementation of the setFireActionForSubmit, so when the button is pressed it triggers the setFireActionForSubmit event.
  I need to pass the RequisitionLineId as a parameter which is present in the t associated with the ShoppingCartPG.
  
  I used the following code in the processRequest
  =================================
  ' public void processRequest (OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
  {
  super.processRequest (paramOAPageContext, paramOAWebBean);
  OATableBean otbRN = (OATableBean) paramOAWebBean.findIndexedChildRecursive ("ItemTableRN");
  OASB OASubmitButtonBean = (OASubmitButtonBean) paramOAPageContext.getWebBeanFactory () .createWebBean (paramOAPageContext, "BUTTON_SUBMIT");
  
  oasb.setID ("addnInfo");
  oasb.setUINodeName ("addnInfo");
  oasb.setText ("additional information");
  
  String pageName = paramOAPageContext.getRootRegionCode ();
  Hashtable params = new Hashtable (1);
  params.put ("param1", pageName);
  
  Hashtable paramsWithBinds = new Hashtable (1);
  paramsWithBinds.put ("param2", new OADataBoundValueFireActionURL (OASB, "${oa.encrypt.current.RequisitionLineId}"));
  oasb.setFireActionForSubmit ("addnInfoEvent", params, paramsWithBinds, false, false);
  
  otbRN.addIndexedChild (oasb);
  }
  =================================
  
  And I capture the event "addnInfoEvent" in processFormRequest method and trying to capture the RequisitionLineId I the past as a parameter.
  This is the code that I used in processFormRequest.
  =================================
  ' Public Sub processFormRequest (OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
  {
  super.processFormRequest (paramOAPageContext, paramOAWebBean);
  OAApplicationModule localOAApplicationModule = (paramOAWebBean) paramOAPageContext.getApplicationModule;
  
  String strEvent = paramOAPageContext.getParameter (EVENT_PARAM);
  
  If ("addnInfoEvent".equals (strEvent))
  {
  Number format = 0;
  try {}
  Format = new Integer (ClientUtil.getDecryptedParameter (paramOAPageContext, "param2"));
  }
  catch (System.Exception e) {e.printStackTrace () ;}
  
  String outmsg = "line ID:" + size + ":" + strEvent;
  throw new OAException (outmsg, OAException.INFORMATION);
  }
  }
  =================================
  
  But I'm not able to capture the RequisitionLineId I sent as a parameter.
  Can someone let me know what I am doing wrong.

  Hello

  Because your table is not a tip so table using a submit button approach will not work because it won't give you rank of reference and you will not be able to enter the id of the corresponding command line, instead you use an icon of the image, which can be created through customization. Let me know if you need help in the code.

  Thank you
  Pratap

• How to use FaceTime with Siri

  I you would Siri have been able to dial phone numbers using FaceTime, so my question is, is it possible? And if so, how?

  Hey MichaelnAvallone,

  Thank you for reaching out to help through Apple Support communities. Looks like you are wanting to make calls FaceTime with Siri. If so, I'd be happy to explain how to make this happen. First, you'll want to press on and hold the Home button or say "Hey Siri" to activate Siri. Then, for example, you can simply say, "make an audio call FaceTime to MOM" and Siri will only start a FaceTime call audio. If you say 'FaceTime Mom' Siri will begin a FaceTime call with video of this contact.

  The link below shows the ways to learn how to use Siri.

  Use Siri on your iPhone, iPad or iPod touch

  Kind regards.

• How to use iCloud

  HI, please help a total techaphobe. I need to store my photos in iCloud (that is already installed on my iPad, I have Apple ID n all). I tried to select the photos, but there is no option, then save in the cloud. Perhaps they are there already as the AutoSave is enabled, in which case, I need to have access to make sure that there so I can remove from iPad. There is nothing in "iCloud Drive" (I have no idea what Drive is in iCloud). All I can find on the line is either too complicated (it can not be that complicated) try to put myself in place (which I am already), or is completely irrelevant, even the things in apple support. I'm sure it's there somewhere, but it seems that I have to trawl through so much, I hope one of us guys can help me with a frank explanation...

  Go to iCloud.com on a browser and click the Photos app to see if your photos are indeed already in iCloud.  You can also check the Photos app on your iPad as well.

  Another thing to note, you can't delete photos from your iPad, because, unfortunately, is not how iCloud works.  It's a synchronization service and not an archival.  There is not your traditional cloud based.  Which means that it syncs your data on all of your devices that have them at your disposal.  Remove a device and it went on all devices.

  Hope that helps.

  How to use iCloud drive

• How to use audio only AirPlay on iOS10?

  HI guys, maybe I'm stupid, but I can't find how to use streams of music after upgrade.

  UseCase:

  -listen to music through headphones on my way back

  -When reached on home stereo and activate AirPlay

  iOS9 - low slide menu - AirPlay - Audio sent to Apple TV and stereo, play music (took about 3 seconds)

  iOS10 - slide down menu - AirPlay - there is only activate AirPlay with mirroring. That is originally for my TV to turn on automatically and also phone is drained and you know - I want to use only phone no stream all on television.  (Past 10 minutes, and can not find how to do this)

  Any tips?

  Hello Tomas Vrabec,.

  Thank you for using communities of Apple Support. Information you provided, it looks like you are unable to use AirPlay to play only mirroring content after upgrading to iOS 10. Surely, I understand your concern, especially since it worked as you need on the previous version of the software. I'm happy to help you.

  Looks like you are taking the correct steps. First of all, I recommend you restart. This can solve a lot of unexpected errors. Use the restart below steps if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo

  Restart your iPhone, iPad or iPod touch

  If the problem persists, please use the steps and pictures in the link below for more information on troubleshooting:

  Get help with AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch

  Have a wonderful day!

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use and control the tabs?

  Sorry for such a general question, but I use Firefox with older versions of Mac OS x for years and have just been struck by this brand new and I have no idea on your tabs, "new tab page" etc. Can you just send me some documents so I can understand what they are and how to use them?

  All I see on my headers Ff are all sorts of legs that have no relevance to me, like 'how to stop Firefox from... '. "(twice), a few other symbols Ff and other"tabs"I don't know everything." All the do is filling up a bar line.

  Thank you-

  You are welcome.

  If you have any other questions feel free to ask them.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• Double mail.ru autification how to use mail.ru account?

  I have double autification of mail.ru , phone number.
  And I need to use Thunderbird.
  How do I?

  Thunderbird does not work with the authentication of step 2. Ask your provider how to use their service with a normal email client. An account Google can generate what they call a specific Application password. Maybe your provider has something similar.

• What is the menu item "Bring everything to the front ', and how to use it?

  What is the menu item "Bring everything to the front ', and how to use it?

  It's a selection in the window menu and means to bring all open windows of this application at the front and push all the windows open for other applications behind. This makes access to the easiest application windows. However, if you don't have that one window open in an application, then the menuitem does nothing.