How to use go URL to navigate from one report to the next

Similar Questions

• Navigate from one report to the other report of dashboard

  Hi all
  I'm doing something like that which we say "Hyper-perceuse in discoverer". I want to display 2 reports in dashboard. The first report shows al results and when I click on the line of column in the first report of the second report must run using the 2 column as a report parameter value. The join between the 2 reports would be that has a single column.
  Any that did something like that or put some light on the realization of this scenario.
  Let me know if further clarity is required on this issue.
  
  Thank you

  http://obiee101.blogspot.com/2010/01/OBIEE-navigating-from-report-to-report.html

• Why do you have my emoticons change from one day to the next and how can I get the 'old'?

  The choice of emoticons changed from one day to the next. I would like to have the 'old'. Why Gmail does not send a msg Heads Up? Thank you.

  Hello

  This does not sound like a Firefox problem, but a change that was made to Google for their e-mail service. I recommend that get you in touch with them through the channels of Gmail support and they may be able to help.

• New FF 32.0.2 break from one day to the next. Full disclosure - Cookie Clicker

  I use FF for many things, often many tabs, etc. I picked up clicker cookie a month or two ago. I always left CC running from one day to the next day without any problem until FF update to version 32.0.2 and now I'm back in the morning to find that it is broken down.

  More recent reports of incidents:

  BP-977c17bd-f1fe-4A8A-98e3-773682140919 19/09/14 07:21
  BP-256c08cf-0725-4200-bA1a-fe2b62140918 18/09/14 07:55

  I use very little add on, same theme, that I had for many years, nothing has changed other than the version of FF I know.

  Any help is appreciated!

  Full Disclaimer: Yes, I know that the perils of the performance of my computer all night. Since I always did before upgrading the version of FF, I fear that this time with which these accidents started after this upgrade. Thank you!!!

  Next steps that I took:

  1 recorded progress, tab reloaded.
  2. right click on the page and go to "display information page.
  2.a. Under support, scrolls to find ads (usually flash .swf) and blocked images from these sites.
  2.b. 1 - 2A to repeat several times
  2.c. According to the news page-> permissions, blocked Adobe Flash for just this site.

  The performance so far is upward. We'll see how he holds up the night.

• Hard drive inexplicably doubled from one day to the next

  My hard drive inexplicably doubled from one day to the next.  I now have only 3 GB free.  I did disk cleaning, defrags, uninstalls, deleted files (just 23 GB of personal files, music, etc. 99 GB drive), etc.  I downloaded TreeSize and see what the size of my files are, but don't know what is normal.  Common sense tells me that clearly something has changed the last time I used my computer to create this problem, but the only change I made was moving my personal files in my user folder to a Public folder, and then in my computer with my other laptop's network.  I checked three times, and my previous user folder files have definitely missing.  Could a bunch of file system are duplicated or something like that?  I know that I cannot delete them, but is it possible to clean them safely?

  To clean all the files on the computer

  1. Click to open Disk Cleanup.

  2. In the drives list, click the drive you want to clean, and then click OK.

  3. In the Disk Cleanup dialog box, click on clean up system files. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. In the disk cleanup: drive selection dialog box, select the drive you want to clean, and then click OK.

  5. In the dialog box disk cleanup, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.

  6. In the message that appears, click on delete files.

     The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

     • Programs and features. This option opens programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

     • System Restore and shadow copies. With this option, you can remove all but the most recent point on the restore disc.

       Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

       In some editions of Windows 7, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. These files and images will also be deleted. For more information about system restore, see what is system restore?

• 'Notes' disappeared from one day to the next

  my "notes" have disappeared from one day to the next. Last accessed last night. Saved on phone appearing with that few, I changed last night. The format has also changed and he no arrow at upper LH has. Anyone who has experienced similar?

  Hello

  If use you iCloud for synchronize your Notes, tap Settings > iCloud then make sure that Notes is toggled ON.

• WiFi adapter has gone from one day to the next

  HI - can someone help me understand why the wifi adapter might have disappeared since the device from one day to the next Manager? And how do I get it back?

  Thank you very much

  P

  Hi P_1

  One of the reasons why a device disappear are simple a hardware malfunction.
  It would be very interesting to know what model of laptop you have and what card WLan disappeared.
  But generally if the Wlan chip isn t listed in Device Manager, and if there is no yellow or peripheral exclamation points strangers, then everything looks like a hardware failure.

• Once I reset my battery CMOS from one day to the next. I tried to install my recovery disk this morning and can't get it done

  Once I reset my battery CMOS from one day to the next.  I tried to install my recovery disk this morning and can't get it done.  I kept receiving an error of 100.
  Don't know what to do.
  Are there out there can HELP?

  Please, I beg you!

  Thank you

  Hello

  Would you please ask the same questions more then once in these Forums.

  What you're doing is confusing in these Forums, as nobody else knows what advice are envisaged for you in other responses.

  Other questions, it seems you have an HP computer.

  Here is the information of HP for Vista from recovery to factory settings:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.
  

  NOTE: perform the recovery process by using the custom recovery disk you created can take less than an hour, whilst using the replacement disks ordered directly from HP can take four to six hours and includes several reboots.
  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.
  Use the recovery discs to restore the PC by following the steps below.
  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. etc.

  If you are having problems using the HP recovery process, you will need to contact HP, because this is Recovery process HP, not Microsoft.

  Details of HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  You can also try the Forums from the HP Support:

  http://h30434.www3.HP.com/

  See you soon.

• Can I install an application from one month to the next?

  Can I install an application from one month to the next? I want to try Indesign CCfor a month or two, so I don't want to pay for a full year. Can I do this?

  Here is a link to a page that contains descriptions for the plans that are available...

  Creative cloud plans

  https://creative.Adobe.com/#plans

• Windows XP normal 'Boot' (no RECOVERY!) After the PC is 'HIBERNATED' from one day to the next?

  (... I've done the research and have not been able to locate one similar problem to others..)

  The "Hibernation" Star appears to be installed correctly on my PC,
  as I can enable the feature at the time manually (in the closing Wdws menu)
  and automatically (in the power settings).

  In the trial of the hibernation feature: (after a success "Hibernation")
  When I press the button power on the box, the expected
  "Recovery Windows" tray is displayed;
  and the PC correctly "resumes" from hibernation.

  But, the next morning ...
  (after successful Automatic HIBERNATION in the evening before),
  When the press,
  the computer Windows "RESTARTS".
  instead of the
  EXPECTED 'RECOVERY WINDOWS.

  How can I solve this problem or diagnosing the causes?

  Best regards, OT
  Note: this PC is on a network and must be put into hibernation
  for "wake on LAN" to succeed.
  .............................................................................

  DEll Dimension 4600
  P4 3 GHz, 2.5 GB
  Windows XP Service Pack 3
  TRENDnet Gigabit adapter: TEG-PCITXR

  ... Must be ...
  ....
  get to your network adapter properties form ...

  one) from Control Panel: click: System, click hardware. Click on Device Manager ...
        Click to Rt.: your network card ; Click: Properties ...
  or
  (b) Control Panel: network connections .
         Click to Rt.: your network card ; Click: Properties / click: tab configure

  Once your form properties of the network card ...

  Next...

  Click on the power management tab.

  Depending on your initial settings, the following process must be repeated several times ...

  Note: you want to end up with the following final settings:

  [ENABLED/CHECKED] Allow the computer to turn off this device ...
  [ENABLED/CHECKED] Allow this device to wake the computer ...

  In my case, I had to... [SET... RESET... SET] theover the properties
      two 2 times,  (Re-boot between the two) to the expected results...

  concerning
  OT

  Note: I suggest strongly that you confirm/install/reinstall latest drivers
  v to your network card before using this hotfix.

  Note 2: this patch is only for when your system already, correctly in and out of hibernation...
  ... but seems to "forget" it is put in hibernation for the next morning...

• Moving the B2B Code from one instance to the next instance

  Hi Alain,
  
  I have a question to the moving code from the development environment to the next instance. For B2B operations, we did a lot of things in
  B2B console as document defnitions, trading partners, listening to the channels. for your information, we do operations entering B2B for now.
  As far as I know, we have the same configurations in the following SOA B2B Console instance as same trading partners, same channels listen,
  same document defnitions everything. In our Application Composite BPEL, after obtaining the B2B adapter file, called an external Web Service and another local Web service. Can you please what exactly it takes to move the composite applications that involve the B2B as a Service adapter. I know configuration files must be added to the file of SAR while moving the code with Ant Scripts.But here in the plans of the config, I know that some hostname for external web services needs to be changed. And I do not know how to deal with B2B while moving the code. Please help as always!
  
  Thank you
  NGO

  Hello, NGO,

  You can export only the agreements that you want to move to next environments. It will include the profile information and document of the partner, but also the details of the contract. To do this, you can use the command line or console B2B -.

  http://download.Oracle.com/docs/CD/E17904_01/integration.1111/e10229/b2b_imp_exp.htm#BABIGHGA
  http://download.Oracle.com/docs/CD/E17904_01/integration.1111/e10229/scrpt_imp_exp_dep.htm#CEGIHBHB

  You can consult the section "7.2, which is copied when you import or export from the import/export tab" link - below

  http://download.Oracle.com/docs/CD/E17904_01/integration.1111/e10229/b2b_imp_exp.htm#BABIGHGA

  So in the middle of the target, you only need to import the configuration using the command line or console B2B. It will automatically create partners, document definitions, agreements etc. After you import, change channel (like the connection details and certificates) details, the details of the contract if necessary (like TP identifiers) and deploy the agreements. You must also enable the channels look. Once the agreements are deployed, go with composite deployment.

  Kind regards
  Anuj

  Published by: Anuj Dwivedi on 12 Aug 2011 18:24

• Why my change in Firefox "39" from one day to the next?

  I swear that more just yesterday, my Firefox ("39.0" according to speech) had a standard X in the upper right corner to get rid of a window, but also a symbol to the left of the beginning of each URL that could slip and fall on the bookmarks toolbar.

  Today, both of these features have disappeared. In addition, the previous button does more, despite not grayed out. Anyone know what what the hell is Firefox? I'm sorry if this has been requested 5,000 times. First Mozilla insisted that I get another user name and password to the right, and once I had made, he would not just show me recently asked.

  It was my theme. Which I had not changed. I used - I think it was called LittleFox. Go to the all fixed default theme. I do not think to check the extensions or themes or none of that because I had not changed or added, and you showed me in exactly in the right direction. Thank you very much - I'm pretty bad at this.

  I'm actually not sure if I got LittleFox or Microfox active, looking at it now. Does not matter, because using a Firefox breaks now. I get the same madness icon and periods nonworking "back" button. Here's hoping someone comes up with a compact theme that works quickly, because I have a very short, very wide screen on this laptop.

• free space on the hard disk of 80% to 10% from one day to the next. What could cause this

  My hard drive went from 80%, 10% free until the next day. What is the cause?

  Hello

  (1) what antivirus program do you use?

  (2) version of Windows do you use?

  (3) have you made no changes before this problem?   I suggest you try these methods and check.

  Method 1:

  Delete files using disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 3:

  Check a drive for errors.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• What is the best way to stream from one Panel to the next?

  I am writing a LabVIEW application that uses two monitors of different sizes on the same computer. I have to listen to four data channels of 100 Hz for a main VI to its front panel as a second front on another monitor.

  My options:

  1. the easiest way would be to call the second front panel as a Subvi, but I'm not like that because as a Subvi the user did not click the buttons or have any input.

  2 another way would be to use a queue of LabVIEW for transmitting data of the main VI to the Subvi; in this way the two panels could have their own loop of the user interface.

  3. is there a better way?

  It depends on your data, but I recommend the queues or user events to send your data on another the VI.

• Search box entries changed from one day to the next in the UK? such as yahoo.co.uk and Ebay.co.uk... How can I change it back to the United States?

  No further details. The search box in upper right corner of the display suddenly changed from the United States to the United Kingdom. I have nothing to do with it. I noticed it just a couple of days, when I went to Google search. I can't change their return. He actually added Chambers (UK) and I've never heard of him.

  Sounds that the locale has changed somehow to en-GB.

  You can get the version of Firefox en here:

  • Firefox 9.0.x: http://www.mozilla.com/en-US/firefox/all.html