How to use the data recovery disk

I create data recovery in my hp envy m6 through portable dvd burner, but after the creation of recovery now when I try to install image recovery his does not work what do I do now?

Hi dear_aneel2000,

Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

I see that you have a problem to do a restore via recovery CD that you created. I'll be happy to help you with this. You get an error message at all? What version of the operating system you are trying to recover? Why have you used a laptop DVD burner to create the recovery CD? What is the product number for your desire to m6?

Thank you

Tags: Notebooks

Similar Questions

  • Satellite P105-S6197: how to use the system recovery disk

    Greetings,

    I have a P105-S6197 and I followed the instructions on the recovery disk,

    1. Insert the disk or disk #1 in the drive.
    2. turn on your computer while holding down the button 'C' (release key 'C' when the display shows "Toshiba")

    but these instructions do not work the computer starts just to the top normally and do never runs the disk.

    Is there another way to get the disc to run so that I can completely reformat my computer to the way it was when it was first purchased.

    Thanks, Edana

    I can provide the same information as codes for:

    There are different options to allow booting from the CD/DVD drive.

    One is the C key (you have to press several times) immediately after that the laptop has been powered.

    The second possibility could be the F12 key.
    It would start on the screen menu and then you may choose the CD/DVD drive as a boot device.

    Last but not least, you can change the boot order in the BIOS.
    The reader of CD/DVD (ODD) in the first place and the gaming laptop should boot from the inserted CD, bootable automatically.

    Concerning

  • Cannot install SP2 after you use the sony recovery disk.

    After Reformatting drive C using the Sony recovery disk, I am not able to download windows SP2 successfully.  Is there a code number I should be go in first.  Windows XP was already preloaded.

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW to get a computer running slot than WinXP SP1 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  • How to use the date with the report parameter format

    Hi all

    How to use the date format with this tag function,

    <? param@begin:P_FROM_DATE? > <? $P_FROM_DATE? >

    This date of form source of report and setting is coming as this 2012/11/01 00:00:00.

    So now I need this in MY-DD-YYYY marker. I tried like this..? param@begin:P_FROM_DATE? > <? $format - date: P_FROM_DATE; ' DD-MON-YYYY '? >

    but its giving error. Can someone pls how to convert to the format of date custom.

    Thanks and greetings
    Srikkanth.M

    Problem solved.

    REF this link

    Date Format of XML

  • How to reinstall Vista (using the HP recovery disk) to my laptop HP that has a new hard drive

    The hard drive failed on my HP laptop.  I bought a new hard drive (not HP) and loaded the HP recovery disks, but a screen will appear that says it is not compatible.  Can I use this new hard drive, or should I buy a hard drive for HP?

    I looked at a few tech forums and from what I can tell, HP crashes their system you can't use hard disks of third parties.  To make a third hard drive to work (depending on the online forums), you will need to bring a technician certified in HP in order to run a utility of DMI (?) and "tattoo" the hard drive for HP use (estimated at close to $45).
    I can't find a technician certified in HP in my area and Geek Squad said that they can do it more... my laptop is now an expensive paper weight, or there at - it another option (short of spending hundreds of dollars on the purchase of a new Vista + MS Office license)?

    Hello

    posters have reported problems with the use of a replacement hard drive not HP, etc.

    as you say you know the answer to your problem buy a new hard drive from HP and then reinstall using their recovery disks

    If you have problems with the HP recovery process, contact the manufacturer

    It's their recovery process not microsofts

    HP support

    http://WWW8.HP.com/us/en/contact-HP/contact.html

    HP support forums

    http://h30434.www3.HP.com/

  • Can satellite L300-1AQ - I use the L300D recovery disk?

    My son has a Satellite L300-1AQ equipped of vista. All of a sudden will load is more the laptop and automatic repair options fails too. There is a blue screen that appears, but only for a second when I try the repair option - then the laptop stops. We have no recovery disks.

    Also, I have a laptop Satellite L300D-13 s that works well and suppose I could get a drive recovery- but prob diff drivers etc.

    Can someone advise me how best to my sons laptop (Im not concerned about retrieving data as all saved already), but do not want to return to the factory settings including Vista. Do not know if using a laptop recovery disk is an option - instinctively is not as ever as simple as that.

    All advice welcome please.

    Hi mate,

    I can t imagine that the Satellite L300D recovery disc will work on Satellite L300. The hardware platform is different, because a single machine is equipped with Intel CPU and the other with AMD processor, so there's a big difference.

    In addition, in the worst case, it could be a hardware problem and in this case the recovery disk does not work

    What can you do now? I think you have to options: either you install Vista from a disk of Microsoft or order you a Toshiba Recovery disk: https://backupmedia.toshiba.eu/landing.aspx

    After installing the Microsoft disc, you can download all the drivers on the Toshiba site. Then you will also get back to factory settings, but it takes more time in the recovery disk because it contains an image which already all the drivers and tools are included/installed.

    I hope I could help a bit. :)

  • Equium A200-1V0 - how to use the Toshiba Recovery CD product?

    I used the reinstall xp on desktop before but do not need to do a reinstall on your laptop (toshiba) with vista with their product recovery disc. With vista, I had to find my own drivers etc. after the OS is installed on a clean drive.

    I want to clean the disc by using a product of drive wipe as Dariks boot and nuke (used on office/xp computers some time and as a very clean before you reinstall drive) on my laptop Toshiba Equium A200-1V0 before inserting the product recovery cd.

    Questions-
    (1) is it ok to erase drive with DBAN - this usually effect the ability of the recovery CD to do its job?
    (2) how can I use the product recovery cd or it is free it is exposed just charge, boot from the cd and follow the instructions online?
    (3) it will return the laptop to the factory shipping status (i.e. don't have no need to look for the drivers, etc.)?

    Thank you very much for your help - just need to be reassured that have not is it a wipe and reinstall on your laptop and vista with a "recovery disc" (always a disc not specify that it is a full copy of the operating system

    James

    Hello James

    The recovery procedure everything is very simple and here are the answers to your questions:

    # You should not do. Before installing recovery starts the disk HARD integer will be automatically formatted, created new partitions and OS will be installed on the first
    # Start Notepad and press F12 repeatedly to enter the boot menu. When the menu is displayed a recovery media in the optical disc drive. In the menu choose the CD/DVD drive and press ENTER. Follow the meny on the screen. After that two or three click OK installation will be implemented.
    # Yes

    When the installation is complete just start computer laptop again and wait until the operating system will be prepared for the first start. It is not necessary to install any additional software.

  • lost user account after using the windows recovery disk.

    Help, please. I turned on my computer and found that windows vista could not start due to a currupt file.

    I have tried rebooting several times without success and ended by using the samsung recovery disc to get windows vista to work.

    I had to create a new user account and have been able to find my original account on the C drive but don't know how to restore it so I don't have start with a new account from scratch.

    Any help is appreciated.

    Information, the original version of windows is now called windows.old and it is here that I want to use the user account.

    Hi Geek teenager,

    Surly there is a way to restore the user account that is sitting in windows.old on the C: drive, instead of having to reinstall all the programs that I never downloaded?

    Programs need to be reinstalled from the original media: CD, DVD, download, etc.

    You can recover data from the windows.old folder, but not programs.

    Set up a new account.

    http://support.Microsoft.com/kb/933209

    How to recover files from an earlier version of Windows in Windows Vista

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot complete the reinstallation of Vista on Compaq laptop using the Compaq recovery disks. Tried to restore disk oem and new close to identical road. Errors: 0xc00000e9 and 0xc0000189 respectively

    With no unusual occurrence that accompanies it, our laptop was able to start and would not initialize anything beyond a screen B & W style BACK and gave the first error (0xc0000e9) on this screen. After several unsuccessful reboots insert us the Compaq recovery disks and crossed the recovery (only full optional with such discs.) At the end of the transfer of recovery (from DVD on computer), the computer tried to restart and reported the same error message. We have seen anything past the transfer of files and B & W on the oem disk. I think the oem HD is bad. Web-surfing suggested the error was associated with a hardware failure and the DVD drive seems to work very well I bought a new HD almost identical to replace the oem version with. Both are Seagate Momentus 160 GB at 5400 RPM drives.

    I re-inserted the recovery with the new installed hard drive disks and it loaded and seemed basically completely install Windows (computer is restored running several times and showed the Windows desktop with sequential programs etc. facilities.)

    To restart the final success, I received an error message in the sense of "windows could not install: Please restart the installation process" and the 0xc000189 error code. I tried again and the result was identical, including the error message. In the process the emblazoned shortcut labeled sunflower administrator with "locked" below briefly appears before the above error appears above him. Navigation on the Web seems to suggest I've hit some kind of security problem that appears when an oem auto-installer is used. He was never a password of any kind on the laptop of our family, if there is one, it should be of Compaq.

    It's an authentic (not stolen etc) oem new install of Windows (the laptop is only 18 months old) and I CD code on the computer but not the case in the installation me I asked for it. I don't know what you looking for installation.

    I'm very confused and any help would be appreciated. Compaq is saying it's a matter of Windows of course.

    Thank you

    http://www.Compaq.com/CPQ-country/cpq_support.html

    Problem with the recovery process, contact the manufacturer of the computer.

    This isn't their recovery process, Microsoft.

    See you soon. Mick Murphy - Microsoft partner

  • How to use the data object 'DatastoreHostMount '.

    I train to iterate on the grouping value in vCenter and for each data store found, determine whether a host has mounted data store or if it is visible to the host. I am using data object 'DatastoreHostMount' , but I don't know exactly how to use the object to retrieve the name of host configuration.

    Here's the perl code snippet and I get an error for:

    #get all hosts within cluster and check the connectionState and compare with all datastores found
    #is there a more efficient way to combine this section with the next section?
    
            my $hosts = Vim::get_views (mo_ref_array => $cluster->host);
    
            foreach my $host (@$hosts) {
                    if ($host->runtime->connectionState->val eq 'connected') {
                            my $datastores = Vim::get_views (mo_ref_array => $cluster->datastore);
                            foreach my $datastore (@$datastores) {
                                      print "  Datastore ", $datastore->host->summary->config->name,"\n"
                            }
                    }
                    elsif ($host->runtime->connectionState->val eq 'disconnected') {
                            print "\t|", $host->summary->config->name, "|Disconnected|\n"
                    }
                    elsif ($host->runtime->connectionState->val eq 'notResponding') {
                            print "\t|", $host->summary->config->name, "|Not Responding|\n"
                    }
            }
    

    Cannot call method 'Summary' on some wrapping 71 de./listCluster.pl.

    Disconnection of the end

    =========================================================================

    -William

    Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

    OK, I remembered how it works. Sorry for the noise:

    |

    My $datacenter = Opts::get_option ('Center');

    My $datacenter_view = Vim::find_entity_view (view_type = > 'Data center',)

    filter = > {name = > $datacenter});

    If (! $datacenter_view) {}

    Die "data center" "» $datacenter. "" not found\n ";

    }

    My $cluster_views = Vim::find_entity_views (view_type = > 'ClusterComputeResource',)

    begin_entity = > $datacenter_view);

    My $counter = 1;

    Print "Clusters found: \n";

    {foreach (@$cluster_views)}

    Print "$counter:". "." $_-> name. "\n";

    My $datastores = Vim::get_views (mo_ref_array = > $_-> data store);

    foreach my {$datastore (@$datastores)}

    my $instances = @{$datastore-> host};

    my $instance = 0;

    while($instance < $instances) {}

    My $x = Vim::get_view (mo_ref = > $datastore-> Home-> \[$instance\]-> key);

    print $datastore--> summary-> name, "Datastore", $x-> name, "\n";

    $instance ++;

    }

    }

    $counter ++;

    }

  • No boot disk found during the installation of windows 7 in the new hard drive by using the original recovery disk

    Hello

    My laptop is HP - Pavilion dv6 2165-tx. My old hard drive damaged and so bought a new one.

    New hard drive works fine. (He went from main hard drive test)

    Now, to install the operating system, when I insert the recovery disc in my CD, I get the error message-"no boot device press a key after the insterting startup disk."

    How can I go about this now?

    Thank you for your contributions.

    I've installed windows 7 using my recovery disk. Problem is that my objective optical drive was not clean, which resulted in the error.

  • My conputer stops suddenly when I was using the vista recovery disk, I can't use this disk to start my computer?

    I tried using the recovery disk and tried to use a USB key to try to get it started but my computer still jumps her.

    Hello

    "It is not always shut-down.

    It's not enough information to that is, if it stops at other times other than when you use the recovery disk.

    "tried to use a USB key to try to get it started."

    Have you changed the Boot order to make the DVD drive 1st in the Boot order if you tried to use the DVD player in your computer?

    And to boot from USB devices, you must have USB Boot active in order to boot on your motherboard and also 1st in the boot order

    Read one of these methods:

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    In a large number of computers, by pressing F12 at startup is a way to change the boot order.

    And in these Forums, when a poster has issues with the manufacturer recovery media, the recommendation is to contact the manufacturer for the aid that the manufacturer provides this software.

    See you soon.

  • How to install the OS, recovery disks give "CDBOOT: could not find the BOO." Error MGR ".

    My computer, a Pavilion a6110n (a few years), had to have the hard drive erased because of a virus that has deeply infected in Vista Home Premium. To reinstall Vista, I tried using the recovery discs HP than the guys at Best Buy is when we bought the computer.

    At startup (with the CD group first in the boot order), I get an error-"CDBOOT: cannot find the BOO." BISHOP. "

    What could be my problem? I tried other discs to restore to another brand of computer (also made by Best Buy) and I get no BOO. MGR error, only an error specific to the manufacturer I can only assume means that I can't use the floppy drive in my HP. could my Best Buy-made restore disks to be missed altogether Boot Manager? If so, how are we dealing with the repair without spending money?

    Here's a noob question, too: these recovery re discs - installed Vista or I'm completely screwed? Thanks in advance for your comments

    You can order the HP recovery media for about $20. Indeed, the set formed by Best Buy seems very defective. Dynex is a cheap brand of the DVD and for the price, I bet what they charged for this ' extra service ' they should have used a good quality brand.

     

    BTW, you could have done the same thing for free, apart from the cost of a few HP machines with the software installed to burn a set of recovery DVD.

    You could also "disappeared" the clean hard disk by starting on HP Recovery Manager to a formatting and reinstalling.

  • How to use the synchronization recovery Code?

    Hi, my name is Furkan. Sync deleted my membership. Recovery, I want to use my code. Where I write the recovery code? Thank you, cordially...

    Firefox 29 and later have a new synchronization version that uses an account of Firefox and use only the name and the password and no longer use a sync (recovery) separated key (the key of synchronization is derived automatically the Firefox account password).

  • Re: BSOD after using the Toshiba Recovery disk

    Using the disk recovery works up until the point when the system starts up his game.
    I turn on the computer to configure the pc. The system will not complete the setting to the top. I either get a message unexpected problem and the pc tries once again, or I get the BSOD.

    Help!

    Hello

    What model of laptop do you have?
    Have you used the recovery disc in the past with success?
    Have you updated something on your laptop (RAM, HDD)?

Maybe you are looking for

  • macOS sierra time capsule does not

    I have upgraded to iOS sierra on my MacBook 2013 and 2015 s pro on 24/09/16. The time machine- Time capsule has not worked since. Wifi works but not the backup. We need real expert help solve this problem, not conjecture. I understand that if I use o

  • Apple Mail 9.3 (3124) slow to move, delete or send messages

    Hello, I would like to know if anyone can help please? I use El Capitan 10.11.5 with Apple Mail 9.3 and feel the slowness in the mail application when moving, deleting or sending a message. I have that on behalf of a configured email which is an iClo

  • I have not yet received my vers.173 upgrade.

    I have the regular Razr and entered the program installation and updates of system to verify the upgrade. It just keeps telling me "checking update available. Please wait... » I left on the search for a long time, several times in the past few days.

  • USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

    I turned on a HP Pavilion Elite HPE this morning and none of the USB ports work under Windows 7. Mouse and USB keyboard work well in the BIOS Setup.  But after Windows starts, it is as if he found neither. I tried to start Windows in Safe Mode and la

  • Applications example for unit Alpha BB10 webworks

    Dear all, hope you can tell on the webworks example BB10 Alpha peripheral applications.