USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

Similar Questions

• My USB ports do not work after that I updated. I discovered that they were not working because my mouse no longer works

  My USB ports are not working after I upgraded to don't know what could have caused this and there is no fix auto feature that opens, I discovered that they were not working because my mouse no longer works HELP Please

  Original title: hardware device

  Hello Neale,

  Two things for you to try: http://support.microsoft.com/mats/Windows_USB_diagnostics and if that does not work, try this one: http://support.microsoft.com/mats/hardware_device_problems/ .

  Let me know if one of them might be your problem.

  Kind regards

  BearPup

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• USB ports do not work after waking up Satellite A200 from sleep mode

  After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!

  Hi mate,

  already tried this:

  Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.

  Maybe it works. Another solution would probably be this Microsoft KB document:

  http://support.Microsoft.com/?scid=kb%3ben-us%3B812946&x=8&y=9

  Greetings

• Satellite L40 - 18W - USB ports does not work after format HARD drive

  I formatted my laptop "L40 - 18w" after that all usb ports do not work.

  Could you please help me on this issue

  Thank you

  Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
  There you can find all the drivers for your model of laptop including driver chipset.

• Satellite P200 - 17 c: USB ports do not work after BIOS update

  Hello

  Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.

  Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)

  I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.

  Any info or advice would be great.

  See you soon.

  Glad you ve found a solution and thank you for sharing this with us

• USB ports do not work on my pc windows 7

  I had installed windows 7 os newly but the usb ports do not work.

  and ports work in windows 8.

  while trying to install the usb driver its showing already installed on your pc.

  I don't understand what the problem is.

  If you are From India call 180030005366 and ask to Lenovo Tech person to take the remote control system to check, seems like a patch required on their side

• Equium A60 - USB ports do not respond

  Hi guys,.

  Could someone help me please, I got a Toshiba A60 equinum which worked perfectly up until when all the USB ports on the laptop refuses to answer. I tried to bypass the USB by getting a cardbus to be inserted into the pcmcia bus, but still did not respond. I can guess that the chipset may have problem. I'm thinking of the chipset was corrupted software.

  If my guess could be considered nearest, what could you suggsest I wish someone could help profer a solution to this problem.

  Thank you
  Sola

  Hi Sola_2,

  Wait a moment and have a look in Device Manager. Are the USB port which is are listed correctly?
  You should try to remove all the USB ports on the Device Manager, and then restart the laptop. After that the ports will be recognized again.

  Try by also updating the BIOS and chipset driver. Both can be downloaded from the Toshiba site.

• Satellite A135-S2286 - USB ports does not work after BIOS update

  I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

  When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

  It will be useful, if someone has a solution for this error.

  Hey Buddy,

  Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

  If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

  I hope that it helps :)

• Satellite L855 - 14 p - USB ports do not work after the mode 'sleep'

  Heya guys,

  I have a strange problem today. The 2 USB inputs on the right side of the laptop (idk who is 2.0 or 3.0) does not work with the reason I can not perceive. These 2 guys are on different days, but in the same way. A month ago, I plugged the mouse USB wireless to one of them, then entered mode 'sleep'. When I came back, I discovered the work of mouse aint.

  Then I realized the port I plugged the key USB has no electiricity inside no more. I found it very strange and continuous without using the port of broken, until yesterday. Yesterday, I made the same mistake (a la mode "sleep" in a USB port plugged into the other port - work-) and I have re-opened, the 2nd port is broken in the same way, too. I've mastered Manager devices, regedit, but it has no use. This lead me to think his could be a hardware problem, but how can be possible? Is this a coincidence?

  Now, I have to use my 3rd and last port on the right side of the laptop with a USB duplicator.
  You have any ideas? Can it be a software problem?

  Understand this correctly? The USB ports mentioned don t work even after restarting a new laptop?

  In this case, it could be really a hardware problem
  But before talking about hardware problems, I recommend to recover the laptop using Toshiba recovery.

  Defining the notebook back to factory settings will help you identify the problem: If the USB ports wouldn't work, this s hardware problem.

• Satellite C50D-A-10Z - touchpad not responding after upgrade to Windows 10

  I updated Windows 10 Windows 8.1. After the update the Touchpad stops responding after a while. Is there a new driver for the laptop? I use a C50D-A-10Z.

  mine did the same EMI said that it is a bug in windows 10 who already seams to be fixed on mine

• USB ports does not work after automatic update in Windows 8.

  Hello

  There was an automatic update that occurred a few nights ago on my computer that I never knew until after that I turned on my computer back the next day. The computer starts up, then stopped and restarted about twice more - a total of three reboots in all.
  It is really annoying, because my Bluetooth has also stopped working a few days before. So I'm completely paralyzed - I've been using USB keyboard and mouse since the Bluetooth went bankrupt. I can not connect.
  The computer starts as usual. The 'numlock' keyboard lights, like the optical light under the mouse; This happens just before the Windows loading screen. However once windows loading screen comes and the "pearls" downstairs begin circulating, the mouse and the keyboard go quiet. I am sure that there is no hardware problems, and the keyboard and mouse work on my Mac very well.
  I tried system restore and PC options refresh on the Startup Options page, but unfortunately, my hard drive is unlocked, and system restore won't work; It says that I need to specify which Windows Installation to restore. I also tried my options with the Windows CD.
  Do a complete restore of the system is not really something I want or feel that I can do. Being the sidenote, I have school work on this machine in question, and it was already over. Otherwise, I would have not had any problems.
  Anyone had this problem before?

  Hi, I just have this problem, but I have noticed that the driver has been disabled, when I activated, it works fine now.

• Usb and Ethernet port does not work after update of windows 8.

  Hello

  I have a new HP laptop, and two days later the window updates automatically and my USB and Ethernet port stopped working. I returned it and got a new laptop and it is same thing. every couple of days that he update and refresh back to the old settings without losing my documents. I can't keep install my apps every two days after the update. Please let me know what I can do to update without having this same problem. If there is anything I can do so I have to return the laptop.

  Ben.

  Hi Ben,

  You can install the Windows updates manually by changing the settings of Windows updates.

  1. Open Windows Update in Control Panel by dragging it from the right edge of the screen, typeSearch (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clickingSearch), get into Windows Update in the search box, by typing or clicking onsettings and then type or by clicking install optional updates.

  2. In the left pane, tap or click change settings.

  3. Under important updates, click the following option:

     Download updates but let me choose whether to install them.

  4. Under recommended updates, select the give me updates in the same way I receive important updates recommended , and then click OK.

  Manually install the Windows updates and find the problem causing the update.

  I hope this helps.

• HP Envy 7640: Receives the message "print status interface is not responding" after upgrade to windows 10

  After the upgrade to windows 10 I have to manually delete each message in the queue.  I can print one message and then I have to go into devices and printers and delete this message before I can print another.  I have a wireless internet connection.  I checked the print spooler and it is set to automatic.

  It is an addition to this post:

  Later, after downloading the latest version of the software and reinstall the printer, the problem has been corrected.

  Hi, uninstall the printer software and download the installation software for free using this linkHP.

• my Outlook Express does not respond after opening in Windows XP

  After opening Outlook Express, he receives e-mails, but doews fails to read/delete/move.

  Please don't call Outlook Express Outlook. They are two different programs with nothing in common.

  What security programs do you use?