How to use the DSP48E multipliers? (FPGA)

Similar Questions

• How to use the target FPGA and co. on the same chassis cRIO?

  I have a cRIO system consisting of a master chassis 9074 with several modules IO and EtherCAT 9144 slave unit.

  I want to run a CIE (see: http://zone.ni.com/devzone/cda/epd/p/id/5333) on the chassis of the master, this uses the analytical engine. At the same time I have to do some very urgent measures if I want to use the Board in hybrid mode, using analysis and FPGA engine at the same time (as described here: http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690.)

  But as soon as I add the FPGA target at one of the chassis, the feature of the ice on this chassis stops working. After some research, I found that the CIE can initialize is no longer the modules belonging to the frame that has the target FPGA on it. Error in the method Init of the CIE is: 65700 (indeterminate). This occurs when you try to use "for a more specific class' on the modules configured with a target FPGA on it.

  Someone knows what can cause exactly this problem and perhaps provide a solution/work around?

  Many thanks in advance.

  Hybrid mode requires you to have a bitfile compiled running on the FPGA to be able to read the Scan Interface IO Variables.  Move the target FPGA at the RT target module will allow Interface of scanning for this module, but the frame will always mode Interface of LabVIEW FPGA.

  

  To get fair access to the scan mode for the frame, right click on the chassis in the project, and choose Properties.  Then, modify the Scan Interface programming.  If you want to continue using the programming of FPGA and the Scan Interface set (hybrid mode), you will need to compile a bitfile (empty if you do not want programs on the FPGA again or containing your FPGA code).  By compiling, the support of the module scan mode for the modules under your RT chassis is compiled in your custom bitfile.  Then, on your VI RT, you need to use reference FPGA VI open to your newly compiled VI.  Once this VI is deployed and ongoing implementation, you get the data from you are the CIE.

  For more information, see this knowledge base article and Reference Interface of Scan CompactRIO and procedures.

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• How to use the Print Screen function?

  I've seen various descriptions of how to use the print screen function.

  It would be nice to actually tell one that works.  None have worked for me.

  [Fn] and Prt SCr does not work.

  CTRL and Prt SCr does not work.

  CTRL, Alt, and Prt SCr does not work.

  [Fn], Ctrl and Prt SCr does not work.

  If anyone knows the correct method to activate the screen capture function which would be a good thing.

  From the looks of things, HP has a big problem with this function.

  Here's a microsoft articleon the use of the screenshot function.

  This should answer your questions.

  Thanks for taking a peek.

• How to use the acronym

  How to use the acronym instead of this?

  Please explain

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.

• SOLUTION - How to use the remote on the Satellite X 200 with Win7 64 bit

  Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.

  Thanks for the link.

  It will be fine if some owner of Satellite X 200 can confirm.

• How to use the software keyboard Toshiba 50L9450VE TV?

  I just bought a LED TV model 50L9450VE. When installing, I need to enter the password for the wifi network. The remote doesn't have a keyboard of the letter, and the TV shows a soft keyboard to enter the password. How to use the software keyboard? I can't figure out how to get the cursor in it; the manual does not say, and I can't find the information online. Thank you.

  Hershel

  Suppose you are from Israel? Although this model is not made for the EU market, but probably for the Asian market, it looks like the European L93 series.
  You will find how to operate the software keyboard (page 52): http://www.toshiba-om.net/pdf/manual...h-Specific.pdf

• How to use the recovery CD?

  Hello

  Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

  Can anyone help please?
  St. Clare

  Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

  Richard S.

• Tecra A8 - how to use the Clipboard?

  How to use the Clipboard?

  I don't know is it instaled when I use the recovery disc.

  After 3 years I do not know how to us it.

  Can help the somebady by PFIC step-by-step instructions

  Hello

  I have no idea of what you want to do and what should I Clipboard Viewer tell you exactly, but AFAIK the Clipboard Viewer are a part of Win XP.
  It s located in the folder C:\Windows\system32
  The file named clipbrd or clipbrd.exe

  You can also start typing Clipboard Viewer CLIPBRD in RUN.

  Welcome them

• How to use the tuner DVB - T in Qosmioplayer?

  Hello

  Can someone tell me how to use the tuner DVB - T in Qosmioplayer? It is very much in the media library, but on starting the Qosmioplayer I just get snow like the old analog TV. I can go to my sky box via composite inputs, but want to use TNT an antenna in the drive.

  Hello

  As far as I know the Qosmio player is not able to receive the digital channels.
  Unfortunately, it is not possible.

• How to use the utility of recognition of face on Satellite L350D

  Hi all

  I am trying to understand how to use the utility on my laptop satellite L350D-131 face recognition but won't have any look.

  Can someone tell me how to use / start this feature please?

  It should come a manual or a tutorial how to use this tool. I'm not an expert in the field, because I saw this feature only on a laptop in the stores. But it is a security feature nice little addition to the fingerprint system.