How to use the external encoder

Similar Questions

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF

• Portege R600 - how to use the external monitor on the docking automatically

  Hi - I just got a new Portege; R600-102. It's a great machine - very light and fast.

  I connect to a Slim port replicator to the office and I wish I could anchor and automatically use the external monitor without opening the laptop. Can someone point me in the right direction on how to do it? This process has worked well on my recently retired Dell X 300.

  More precisely:
  # I have the laptop closed Portégé and standby mode
  # I anchor in the Slim Port Replicator (SPR)
  # I press the button 'on' on the SPR
  # I see the message "recovery windows" and the bars of the countdown on the external monitor. (So I know it's connected and you can see the external monitor)
  # The laptop turns on but use the laptop screen (private) LCD
  # I have to open it and manually tell it 'out to watch.
  What can be automatically?

  Thanks for the tips.

  Post edited by: ExDirectory

  Hello

  You use Windows XP Home or Vista edition?

• Examples on how to use the external value of the vro

  I'm trying to use the 'external value' VRA 7 feature to get data for a property definition.  Examples or guides?   I have a quick action that returns the string, but I get this error

  

  Figured it out... the exit on the action must be array/string...

  now working to reproduce the relantionships parent on custom properties that not available in version 7

• How to use the external swf semi-transparent mask?

  I want to use the external swf semi-transparent mask for the smooth transition. I use

  clip.cacheAsBitmap = true;

  mask.cacheAsBitmap = true;

  clip.setMask (mask);

  Everything works fine. But when I use

  loadMovie ("http://www.url.com/movie.swf", "_root.clip");

  clip.cacheAsBitmap = true;

  mask.cacheAsBitmap = true;

  clip.setMask (mask);

  It does not work... What am I doing wrong?

  Well, if your loadMovie is on the same timeline as the code that you set as a mask, then you need not _root.

  And sorry, I forgot, there was a problem with the main mc of masking that loadMovie is load in. While I was doing was putting clip inside another mc and called as well as mc 'container' then my code would look like:

  masker.cacheAsBitmap = true;

  container.cacheAsBitmap = true;

  container.setMask (masker);

  container.clip.loadMovie ("movietoload.swf");

  Download two attached SWF files and open the main.swf to see.

• How to use the external power supply on Camileo s20

  How the external power is connected to S20 and registration is possible at the same time. When the USB is plugged into my camera it will not turn on.

  1. open the battery cover
  2. remove the battery
  3 connect the usb power cable

  Now you can use S20 with external power without draining the battery.

  Crazy but true...

• How to use the external USB camera on iPhone IOS 6?

  Hello

  I need to use an external USB Endoscope for the inspection of vehicles and etc. using IOS on iPhone 6.  I bought an external USB 2.0 adapter lightning, plugged in the endoscope (comments showed that this endoscope works on IOS devices) and it pops up and says that the device used too much power to be used on the device.  You are not sure if Apple cut the device to use at that time or not? But the device was always powered up as shown on the drive of the USB light on the endoscope.

  I downloaded several types of applications of the observer including I think that the right VLC who apparently used one of the reviewers and I couldn't figure out how to get an any of them to allow the selection of an external camera.

  Does anyone have an idea if it will work or how I can make it work?

  I would be very grateful for any input or assistance with this!

  Here is the link of the product:

  http://AMZN.to/25pJpXY

  Thank you very much

  Dave

  I must also point out that this unit has worked on Android Samsung Galaxy Note 5 with no problem and no warning of power.

• How to use the external screen with my Satellite M30?

  Hi guys, I have the following problem:

  I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard.

  Now that I bought a TFT I wanted to use it as a primary device, so I need to take the laptop to the external output.
  The laptop itself recognizes as a secondary screen already, but this isn't what I want.
  Problem is I can't switch from the display without the FN key devices!

  I tried to search the net and this forum - but the solution posted does not work for the M30. There is no option in the utility of HW and not in the BIOS to enable the external keyboard support.
  Please is there any other combination of keys that would work or a software utility that allows me to turn on? It's a really bad situation for me :(

  All solutions anyone? :(

  Greetings and thanks in advance
  HQ

  Hello

  Please don't be crazy on me but I write here very often and somehow try to help, but I'm still irritated if someone thinks that anything is possible. Unfortunately, you have to accept that sometimes there is hardware limitation and there is nothing to do.
  I want to talk about primary and secondary monitor.

  On most laptops, the LCD is always set as primary and cannot be changed. So, as far as I know, without using the FN + F5 key combination you extend the desktop to external display and use both of them. Using display settings you should be able to switch to an external display only (display control panel settings NVIDIA advance settings and so on). Please test only because I don't have M30, but the principle is used the same.

  If you will be able to use external display only try to restart your laptop and see on which screen the office will be shown. If you will be lucky and office will be shown on the external display, try to extend the desktop to second monitor (laptop LCD).

  Good bye

• How to use the external optical drive as disc 2011?

  Hello

  I'm trying to use the optical drive of my iMac (super) dvd 2011 as an external drive for my new 2015 27 "iMac

  I plugged it but any time, I put a disc in the drive it runs for about 30 seconds and then ejected

  is there a software I need to install in order to use the drive?

  Problem solved I connect the external hard drive after starting the computer, open the drive must be connected before starting upwards

  works fine now

• How to use the external package in OpenScript 12.5.0.2?

  Hello.

  There is a feature in OpenScript called libraries of functions. It works like a charm, and that's fine.

  But I wonder if it is possible to use external classes, not functions. Lets' we have a packet com.company.utils, I want to use for all OpenScript tests.

  It is imported into the project. OATS IDE itself indicates that the module is imported, helps the external use of the classes and so on, but when I try to run the script, it does not always succeed except NoClassDefFound.

  No chance I can do external code packages (jars NOT) work?

  Hello

  One way is you can add the jar files to the assets and call the class of pot in the code and object creation will help you use its methods

  Otherwise, keep the class file for your code to java with the script and import the same class your script. Create an object of class and then you can call the methods of the same class

  Kind regards

  Dembélé M

• How to use the external drive recovery with ODD?

  Hello

  I need to recover my Toshiba laptop via original Toshiba recovery dvd, but my internal dvd ram does not work, then, how I upgraded my pc to search for external dvd ram when windows starts? I followed the instructions and the C button when starting the computer, but when I press F12 boot any drive, I select my pc starts just windows...

  Thanks for your help. J. Hlavsa

  Hello

  Your laptop is old laptop model and OS can be installed using recovery media only.
  External ODD cannot be recognized as boot device and you won't be able to use it.

  See operating manuals and there you will find a list of all compatible ratings, buy one and replace.
  Replacement isn't complicated and you can do it alone.

  If you need help let us know.

• How to use the external routing in human task

  Hello
  
  Could you please help me in knowing how to create external routing in SOA Composite human task.
  
  Thank you

  Check: http://docs.oracle.com/cd/E11036_01/integrate.1013/b28981/workflow.htm#BABECIAA

  Section 15.6.5.7.1 by specifying a class name

  -Marie

• I would use the external drive to download my photos, documents, etc. but do not know how to proceed.

  I just got my old crash (desk top) computer. I knew it would, so I transferred all my information on an external hard drive. I bought a dell 2020 with windows 8, only bought a few days ago. I would use the external drive to download my photos, documents, etc. but do not know how to proceed.  My old computer won't start at all, that's why I got the external drive. Could someone please help me with this task. Thank you.

  Original title: confused

  You can simply plug it in, connect the external hard drive, make sure it is turned on.

  Then copy and paste on your files.

  In Windows 8, start File Explorer

  

  Highlight all the files and folders

  Click on copy on the Ribbon (Home tab)

  Then then paste into their respective folders

  Press Windows key + R

  Type: %UserProfile%

  Press enter

• How to generate the password encoded using agent in ODI?

  Hello
  
  I've created a scenario and I plan to them. Now, I want to create an autonomous agent to run this scenario. To do this, I update odiparams.bat file where I am mentioning the details of the repository. I want to generate the encoded password repository connection using batch processing utility officer. After you type following command at the command prompt in windows xp:
  

  agent to encode the password

  Failure of the sound connection password invalid username error display.
  
  What should do? How to generate the password encoded using batch agent utility?
  
  Thank you
  Shrinivas
  
  Published by: Shrinivas Dayma on 13 Aug 2011 02:03

  Hi Shrinivas,

  This command is for ODI 10 g.

  For 11g,.

  Encode

  Thank you
  Guru

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.