How to use the external routing in human task

Similar Questions

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF

• Portege R600 - how to use the external monitor on the docking automatically

  Hi - I just got a new Portege; R600-102. It's a great machine - very light and fast.

  I connect to a Slim port replicator to the office and I wish I could anchor and automatically use the external monitor without opening the laptop. Can someone point me in the right direction on how to do it? This process has worked well on my recently retired Dell X 300.

  More precisely:
  # I have the laptop closed Portégé and standby mode
  # I anchor in the Slim Port Replicator (SPR)
  # I press the button 'on' on the SPR
  # I see the message "recovery windows" and the bars of the countdown on the external monitor. (So I know it's connected and you can see the external monitor)
  # The laptop turns on but use the laptop screen (private) LCD
  # I have to open it and manually tell it 'out to watch.
  What can be automatically?

  Thanks for the tips.

  Post edited by: ExDirectory

  Hello

  You use Windows XP Home or Vista edition?

• How to use the external encoder

  Can someone tell me please how to open the external encoder to be able to copy and paste links in there to use my web cam?

  Thank you

  Find a forum for some product that this implies and post your question there.

  Here is a link to a page that provides links to all of the Adobe forums...

  Forum links page:
  ----------------

  https://forums.Adobe.com/welcome

• Examples on how to use the external value of the vro

  I'm trying to use the 'external value' VRA 7 feature to get data for a property definition.  Examples or guides?   I have a quick action that returns the string, but I get this error

  

  Figured it out... the exit on the action must be array/string...

  now working to reproduce the relantionships parent on custom properties that not available in version 7

• How to use the external swf semi-transparent mask?

  I want to use the external swf semi-transparent mask for the smooth transition. I use

  clip.cacheAsBitmap = true;

  mask.cacheAsBitmap = true;

  clip.setMask (mask);

  Everything works fine. But when I use

  loadMovie ("http://www.url.com/movie.swf", "_root.clip");

  clip.cacheAsBitmap = true;

  mask.cacheAsBitmap = true;

  clip.setMask (mask);

  It does not work... What am I doing wrong?

  Well, if your loadMovie is on the same timeline as the code that you set as a mask, then you need not _root.

  And sorry, I forgot, there was a problem with the main mc of masking that loadMovie is load in. While I was doing was putting clip inside another mc and called as well as mc 'container' then my code would look like:

  masker.cacheAsBitmap = true;

  container.cacheAsBitmap = true;

  container.setMask (masker);

  container.clip.loadMovie ("movietoload.swf");

  Download two attached SWF files and open the main.swf to see.

• How to use the external power supply on Camileo s20

  How the external power is connected to S20 and registration is possible at the same time. When the USB is plugged into my camera it will not turn on.

  1. open the battery cover
  2. remove the battery
  3 connect the usb power cable

  Now you can use S20 with external power without draining the battery.

  Crazy but true...

• How to use the external USB camera on iPhone IOS 6?

  Hello

  I need to use an external USB Endoscope for the inspection of vehicles and etc. using IOS on iPhone 6.  I bought an external USB 2.0 adapter lightning, plugged in the endoscope (comments showed that this endoscope works on IOS devices) and it pops up and says that the device used too much power to be used on the device.  You are not sure if Apple cut the device to use at that time or not? But the device was always powered up as shown on the drive of the USB light on the endoscope.

  I downloaded several types of applications of the observer including I think that the right VLC who apparently used one of the reviewers and I couldn't figure out how to get an any of them to allow the selection of an external camera.

  Does anyone have an idea if it will work or how I can make it work?

  I would be very grateful for any input or assistance with this!

  Here is the link of the product:

  http://AMZN.to/25pJpXY

  Thank you very much

  Dave

  I must also point out that this unit has worked on Android Samsung Galaxy Note 5 with no problem and no warning of power.

• How to use the external screen with my Satellite M30?

  Hi guys, I have the following problem:

  I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard.

  Now that I bought a TFT I wanted to use it as a primary device, so I need to take the laptop to the external output.
  The laptop itself recognizes as a secondary screen already, but this isn't what I want.
  Problem is I can't switch from the display without the FN key devices!

  I tried to search the net and this forum - but the solution posted does not work for the M30. There is no option in the utility of HW and not in the BIOS to enable the external keyboard support.
  Please is there any other combination of keys that would work or a software utility that allows me to turn on? It's a really bad situation for me :(

  All solutions anyone? :(

  Greetings and thanks in advance
  HQ

  Hello

  Please don't be crazy on me but I write here very often and somehow try to help, but I'm still irritated if someone thinks that anything is possible. Unfortunately, you have to accept that sometimes there is hardware limitation and there is nothing to do.
  I want to talk about primary and secondary monitor.

  On most laptops, the LCD is always set as primary and cannot be changed. So, as far as I know, without using the FN + F5 key combination you extend the desktop to external display and use both of them. Using display settings you should be able to switch to an external display only (display control panel settings NVIDIA advance settings and so on). Please test only because I don't have M30, but the principle is used the same.

  If you will be able to use external display only try to restart your laptop and see on which screen the office will be shown. If you will be lucky and office will be shown on the external display, try to extend the desktop to second monitor (laptop LCD).

  Good bye

• How to use the external optical drive as disc 2011?

  Hello

  I'm trying to use the optical drive of my iMac (super) dvd 2011 as an external drive for my new 2015 27 "iMac

  I plugged it but any time, I put a disc in the drive it runs for about 30 seconds and then ejected

  is there a software I need to install in order to use the drive?

  Problem solved I connect the external hard drive after starting the computer, open the drive must be connected before starting upwards

  works fine now

• How to use the external package in OpenScript 12.5.0.2?

  Hello.

  There is a feature in OpenScript called libraries of functions. It works like a charm, and that's fine.

  But I wonder if it is possible to use external classes, not functions. Lets' we have a packet com.company.utils, I want to use for all OpenScript tests.

  It is imported into the project. OATS IDE itself indicates that the module is imported, helps the external use of the classes and so on, but when I try to run the script, it does not always succeed except NoClassDefFound.

  No chance I can do external code packages (jars NOT) work?

  Hello

  One way is you can add the jar files to the assets and call the class of pot in the code and object creation will help you use its methods

  Otherwise, keep the class file for your code to java with the script and import the same class your script. Create an object of class and then you can call the methods of the same class

  Kind regards

  Dembélé M

• How to use the external drive recovery with ODD?

  Hello

  I need to recover my Toshiba laptop via original Toshiba recovery dvd, but my internal dvd ram does not work, then, how I upgraded my pc to search for external dvd ram when windows starts? I followed the instructions and the C button when starting the computer, but when I press F12 boot any drive, I select my pc starts just windows...

  Thanks for your help. J. Hlavsa

  Hello

  Your laptop is old laptop model and OS can be installed using recovery media only.
  External ODD cannot be recognized as boot device and you won't be able to use it.

  See operating manuals and there you will find a list of all compatible ratings, buy one and replace.
  Replacement isn't complicated and you can do it alone.

  If you need help let us know.

• How to use the second server virtual router?

  Hey guys. I have a basic configuration to the House. ISP-ISP-router and my host pc. I want to be able to separate my virtual network on my home network. I have a second cisco router (WRT320N). I also have two network cards integrated with my motherboard. Now, is it possible to use the secondary router for my virtual server for my test environment?

  So far, I connected the external port of the ISP router on the internal port of the router Cisco-for the basic configuration. I guess, I need to connect the secondary of my host network adapter to the router cisco-but then, I do not know how to configure vmware to use secondary nic as NIC default.

  Any help is appreciated.

  Thank you

  Right, I found the solution, but I thought I'd share it for people who do not know.

  Router installation as follows:

  ISP-router to Host (NIC_1) to the host (192.168.0.1) connectivity

  ISP-router-Cisco-router (Internet Port) (192.168.1.1)

  MUST be on different subnets

  Cisco-router to Host (NIC_2) (in the NIC_2 adapter properties, all checkboxes except VMware Bridge Protocol MUST be deselected HOST, so please use NIC_2)

  VMware, Virtual Network Editor, full of connection Type must be selected as MANUAL that points to your NIC_2

  AND

  the parameters of the Virtual Machine to the network card, ' Custom: specific Virtual Network ' should point to NIC_2.

  This will allow you to use your second NETWORK card for your virtual machine (but the MAC address will be assigned by VMware... does cause no problem at all)

  Your virtual, in my case, Windows Server 2008 R2 operating system, will be no connectivity until you assign a static TCP/IPv4 address.

  This will isolate your virtual network on your home network.

  I hope this helps the other.

• I would use the external drive to download my photos, documents, etc. but do not know how to proceed.

  I just got my old crash (desk top) computer. I knew it would, so I transferred all my information on an external hard drive. I bought a dell 2020 with windows 8, only bought a few days ago. I would use the external drive to download my photos, documents, etc. but do not know how to proceed.  My old computer won't start at all, that's why I got the external drive. Could someone please help me with this task. Thank you.

  Original title: confused

  You can simply plug it in, connect the external hard drive, make sure it is turned on.

  Then copy and paste on your files.

  In Windows 8, start File Explorer

  

  Highlight all the files and folders

  Click on copy on the Ribbon (Home tab)

  Then then paste into their respective folders

  Press Windows key + R

  Type: %UserProfile%

  Press enter

• I'm having a problem on line when someone else uses the same router, error message: there is an IP address conflict

  Original title: I'm having a problem online when someone else uses the same router I have...

  I bought a new laptop with windows 7 premium. I connect to the internet through an external modem dsl and a wireless belkin n router. My daughter has an Android and uses the same connection... The problem is that we cannot not be online at the same time... If shes online using his android I can't connect using the laptop and if Im online using the laptop, she can't get online using his android... The error message indicates that there is a conflict of IP address... And sometimes says that there is a dns error... How can I fix this problem so that we can surf the net using the same connection?

  Hello

  Router is the gateway to the Internet, and it assigns the IP address for different devices. With the error message, you have so many IP address conflict, it seems that the IP address is not assigned correctly on the router.

  I suggest that you turn off all devices, reset the router and turn on the router. Once that is done turn the whole one and try to connect to the Internet.

  For assistance on this, you can contact your router manufacturer or Internet service provider.

  Hope the information is useful.