How to use the iMac 2010 as a target to display for mac pro 2009 with invada coda

Similar Questions

• I have a purchased copy of PhotoShop Elements 9.  When I run it now I get an error message - error: 213:19.  What does that mean?  How to use the software I paid?  Thanks a lot for your help!

  I have a purchased copy of PhotoShop Elements 9.  When I run it now I get an error message - error: 213:19.  What does that mean?  How to use the software I paid?  Thanks a lot for your help!

  See here:

  In Photoshop Elements license error

• How to use the second HARD drive of Satellite A210 - BP1 for mirroring

  Satellite A210-BP1 came with 2 HDD (160 GB).
  Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
  This should be done without supervision and in real time - as a RAID 1.

  How can I do this?
  I also have Vista professional available and I would be willing to use 3rd party software as well.

  Thanks in advance for your answers.

  Hi Jan

  I doubt that this is possible
  Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
  Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

  Therefore, the final answer is; NO, it is not possible to use mirroring

  Concerning

• How to use the POwn, PCon or PMin in codification

  Dear all experts,
  
  Do you know how to differentiate the consolidation of one account with another? The condition is:
  Assets: PCon
  Liabilities: PCon
  Account (NCI, the working capital reserve, etc.): POwn
  Is this possible? Actually when and how to use the POwn, PCon and PMin?
  
  Thank you for your attention
  

• Upgrade the OS on Mac Pro 2009 OS 10.5.8 to a newer version without Apple Store

  Hello Mac Fans,

  I need upgrade OS on a Mac Pro 2009 with current OS 10.5.8 to the latest possible version for this model. I don't have app from Apple Store in this version of the operating system.

  Data sheet:

  Model name: Mac OS X 10.5.8 (9L31a)

  Processor: Dual-Core Intel Xeon

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Processor: Dual-Core Intel Xeon

  Processor speed: 2.66 GHz

  Processors: 2

  Total number of cores: 4

  L2 Cache: 4 MB

  Memory: 4 GB

  Bus speed: 1.33 GHz

  I should be grateful if you would help with the following two questions:

  • Do I need to purchase the snow leopard for $19.99 on their Web site and then move into the new OS version / new? Is there a way to avoid spending money on a platform that will only fill to the latest operating system for this iMac?
  • Settle El Capitan on this model of iMac result in slower operation of the operating system? My computer is too old for the El Capitan? If so which version should I update and where can I get if go?

  In addition, it's Mac was having once belonged to one of my friends. Do I need from the previous apple associated with this MAC ID for purchases in apple store?

  It seems to pay to use a vintage OS on an iMac vintage not knowing if it will work even ridiculous. I also own a MacBook Pro3, 1 (intel Core 2 Duo 2. 4 GHz, 4 GB) and I upgraded from the same version of the operating system: 10.5.8 directly in El Capitan and I didn't have to pay. I had however Apple Store that seems to make the software easier to access, but the operating system should be available for free download directly from Apple. I got the ElCapitan installer disk external and transferred to the Mac Pro, but the pop-up message advised that it was impossible to install this version. The difficulty in upgrading the operating system more old iMac is not just for Apple users.

  If you can, let me know what I can do to make the use of this machine.

  Peace

  pecatoribus

  1. unless you have another Mac, you do. This step can be skipped using target disk mode, installation thumbdrive or NetInstall (Mac OS X Server only), but doing so will probably need scrub or repartitioning the internal drive.

  2. the most recent OS because it is 10.7.5.

  (144443)

• Cannot use iMac 27 mid-2010 - yosimte - display target with mac pro 2009 - maviricks - well that I use the mini display cdmi Caron

  I have an imac 27 inch, mid-2010 and I'm trying to use it as screen target with mac pro 2009 and I do the step open two computer connect with cable - hdmi - mini display but has not detected

  I have mac with os x yosimete and mac pro have the mavericks

  According to the use of your iMac as a display with the target - Apple support display Mode, it requires a 'Mini DisplayPort to Mini DisplayPort' cable.

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• Use the iMac with bootcamp as a monitor

  Dear community,

  Currently, I use my windows desktop pc, and I would use my iMac (24 inch end 2010) as a second monitor. The iMac runs on bootcamp and the apple partition is unfortunately broken. This means that I can only use windows on my iMac. Now, I want to use the iMac as my second monitor. Should what cable I buy to make it work? And how do I use target mode on windows (can not enter my Mac partition...)? I'm a little worried about buying bad cables. If anyone knows how to solve this problem, I would greatly appreciate your help!

  Sorry for my English, if you don't understand something just ask me.

  Kind regards

  Antonie Muijtjens

  No, see > use your iMac as a display with the target - Apple Support Display Mode

  

  

• Unable to connect to websites using safari, although my wife use the imac, which has a separate login id can?

  When I open Safari from the dock it shows as usual, but when I try to connect to it looking for Web sites, it does not. can't display preferences etc either. Also, my wife uses the Imac and has a separate login ID and its works very well for her. Worked ok until the end of the week. Any ideas how to fix? Have tried to install the latest version of Mac OS X, but nothing helps.

  What version of Mac OS X is installed, your profile shows 10.7 but I suspect that it is not correct.

• How to use the TRUNC function with dates in the expression builder in OBIEE.

  Hello
  How to use the TRUNC function with dates in the expression builder in OBIEE.
  TRUNC (SYSDATE, 'MM') returns 1 July 2010"where sysdate is July 15, 2010 ' in SQL. I need to use the same in the expression builder in the logical layer mdb column.
  
  
  Thanks in advance

  Use it instead:
  TIMESTAMPADD (SQL_TSI_DAY, (DAYOFMONTH (CURRENT_DATE) *-1) + 1, CURRENT_DATE)

• How to use the Type of Oracle Table values in the Select statement.

  Hello
  
  I get the initial set of values in the Table of Type Records of the Oracle and want to use the list of values in the Select statement.
  
  For example, try something like the following:
  
  TYPE t_record () IS RENDERING
  ID TABLEA.ID%type,
  NO TABLEA.NO%type
  
  );
  v_record t_record;
  T_table TYPE IS the v_record TABLE % TYPE;
  v_table t_table;
  
  -Code to fill the values of v_table here.
  
  SELECT ID, NO, COLLECT in BULK IN < some other table variabes here > FROM TABLEA
  WHERE ID IN (i) v_table USER.USER;
  
  I want to know how to use the Type of Oracle Table values in the Select statement.

  Something like this:

  create or replace type t_record as  object (
  id number,
  no number
  )
  /
  
  CREATE or replace type t_table AS TABLE OF t_record;
  /
  
  set serveroutput on
  declare
  
    v_table t_table := t_table();
    v_t1 t_table := t_table();
  
  begin
  
    v_table.extend(1);
    v_table(1).ID := 1;
    v_table(1).No := 10;
  
    v_table.extend(1);
    v_table(2).ID := 2;
    v_table(2).ID := 20;
  
    SELEC t_record (ID,NO) BULK COLLECT INTO v_t1
    from TableA
    FROM TABLEA
    WHERE ID IN (select t.ID from table(v_Table) t);
  
    for i in 1..v_t1.count loop
      dbms_output.put_line(v_t1(i).ID);
      dbms_output.put_line(v_t1(i).No);
    end loop;
  end;
  /
  

  No test!

  P;

  Published by: bluefrog on March 5, 2010 17:08

• I can connect new iMAC (A1418) on my Win10 to use the iMAC monitor?

  Can I connect my new iMAC (A1418) to my Win10 so the Win10 can use the iMAC monitor?

  Read the article to use your iMac as a display with the target - Apple Support Display Mode Apple. Apple described the iMacs will work. You will probably find that you get an external display to work with your Windows machine.

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.