How to use the resolution to 1280 * 768 on external TV with Equium A200-15i

Similar Questions

• Satellite A20: How to get the resolution 1360 x 768 on external screen

  Hello. I have Satellite A20 and LG HDTV with a resolution of 1360 x 768.

  What I want is to use HDTV as a second monitor... but I can not correct output resolution. :(

  I can only adjust the output resolution:

  640 x 480
  720 x 480
  720 x 576
  1024 x 768
  1280 x 1024

  If he can do 1280 x 1024, then it surly can do 1360 x 768?

  can someone tell me if this can be done and how to make 1360 x 768

  Thanks :)

  Hmm, usually you can't choose this resolution because the graphics driver does not support!
  You can try to find the driver of the manufacturing of the graphics card and could try to install it.
  If you fail, I guess that you can't use your favorite ;(resolution

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Satellite U300-153: how to use the resolution to 720 p on TV

  I have laptop satellite u300-153 and a HD ready LCD Tv.
  I have the connected with vga cable, because the laptop has vga output.

  The problem is that when I change the output resolution in the Setup menu of the graphics card to a larger than 1024 x 768 resolution, television reports an error of non-signal.

  I searched this forum and found that it's because the resolutions on the one I mentioned earlier are locked in Bios of the Government.
  I would use a normal on my HDTV 720 p resolution, because I intend to use it as my main screen at home.

  Using the 720 p resolution is not required, I would be just as satisfied if I could use any other wide screen resolutions.

  Hmm. I think that the problem is you graphics driver doesn't support external resolution of 720 p (1280 x 720).

  Unfortunately, if this resolution is not included in the graphics driver, then you will not be able to use it :(

  That's pity

• Portege M400: Is it possible to use the resolution 1400 x 1050 on external monitor?

  The Portege M400 SXVGA (i.e. 1400 x 1050) can support 1400 x 1050 via analog / external monitor? I ask this question because I can't do! Most importantly, he is happy to provide, even if the monitor is a TFT 1400 x 1050 screen is 1280 x 1024.

  I downloaded the latest Intel drivers and screen drivers, and although the o/s reports screen as being happy to show 1400 x 1024, it is not an option when selecting the resolutions.

  Is this a known issue?
  It is corrected using digital?
  Am I stupid?

  Hello

  I'm not 100% sure but I think that that it will not support a higher resolution. In my opinion, it is according to the performance of the graphics card and the resolutions supported and not according to the used port.

• How to use the NEW BLACK xbox 360 media center remote with Windows 7 Ultimate & Windows Media Center

  I have the new Black xbox 360 media center remote and I can not understand how to use it with my PC to run windows media center. I'm running Windows 7 Ultimate x 64, and I also have the receiver wireless for my xbox 360 wireless controllers.

  Here is a link to a better image of the remote control.
  Here is a link to my xbox 360 wireless receiver.
  I also have a mini receiver RF for a keyboard and a mouse if that helps somehow.
  I don't have an xbox 360, but I like to use my controller wireless for my PC games and emulators like the style and color of this remote it would go well with my current setup as well as with XBMC.
  If anyone knows or can help me to find a way to make this work I would appreciate it a lot.
  Thank you
       
  Michael

  Hi Michael,

  Thanks for posting your question in the Microsoft Community.

  The question you have posted is related to the Xbox 360 and it would be better suited to contact Xbox support to obtain assistance from the links below:

  Contact XBox Support:

  http://support.Xbox.com/en-us/contact-us

  http://support.Xbox.com/en-us/browse?product=Xbox-360

  I hope that the information above helps you.

• How to use the detector face on the screen lock

  I HAV a lenovo tab

  I want my lock screen for face detection, but I can't lock

   

  Hi Hirukhadka,

   

  Thanks for posting your question in the community of Microsoft Windows.

  It appears from the description of the problem, you want to know how to use the detector face on locked in your Lenovo tab.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  To help you solve the problem, I would appreciate if you could answer the following questions:

  1. What is the Lenovo tab model number?

  2 are you trying to lock your computer using face sensor?

  You need to contact your manufacturer regarding your screen using the face detector, blocking as this is a feature on your Lenovo tab.

  For more information:

   

  Contact Lenovo Support:

  http://shop.Lenovo.com/us/landing_pages/contact/

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• How to use the Print Screen function?

  I've seen various descriptions of how to use the print screen function.

  It would be nice to actually tell one that works.  None have worked for me.

  [Fn] and Prt SCr does not work.

  CTRL and Prt SCr does not work.

  CTRL, Alt, and Prt SCr does not work.

  [Fn], Ctrl and Prt SCr does not work.

  If anyone knows the correct method to activate the screen capture function which would be a good thing.

  From the looks of things, HP has a big problem with this function.

  Here's a microsoft articleon the use of the screenshot function.

  This should answer your questions.

  Thanks for taking a peek.

• Flag r-110 all-in-one: how to use the microphone internal hp r-110 all-in-one

  I know where the internal microphone, but how to use it? I always had an external mic in the past. My r-110 HP all-in-one is new so still get acquainted with it. What I need to set up the microphone and if yes, how and where. Win 10 has a configuration of mic with voice training / recgonition, but it does not show internal mic as a choice so I'm stuck! I would try to make a recording of the voice, but have no idea how activate the microphone. HELP and THANKS

  @terrib

  System is (perhaps) one of:

  Results for ' Pavillion r - 110 all in one " (51)

  Select System > product Home Page >

  Product information > category: specifications

  Form example:

  20 - r110d of HP TouchSmart all-in - One PC product specifications

  Microphone and Webcam are located at the front of the computer, along the top edge (top of the screen).

  

  If your taskbar contains the small speaker icon,

  Right click on the speaker icon >

  Playback devices > recording >

  Check / confirm that the "internal microphone" is selected as the default device

  You can also find the control of 'His' in:

  Control Panel > display icon > Sound

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• How to use the acronym

  How to use the acronym instead of this?

  Please explain

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.