Satellite U300-153: how to use the resolution to 720 p on TV

Similar Questions

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?

• Re: Satellite U300 - 153 (PSU30E) - updated after the BIOS, I can't install Vista

  I recently installed an update of the BIOS for the U300-153 from the Web from Toshiba website.
  Has been running Vista Ultimate at the time.

  From that moment I could not access my hard drive. Restart the BIOS upgrade, it would hang on to the Vista loading screen. I tried to reinstall Vista Ultimate, but it always freezes at the point "finish installation". Have not tried to install other operationg system.

  Help, please!

  Hello!

  Weird, but in my opinion, it looks like to what you have tried to install an incorrect BIOS for your laptop.
  Are you really sure that you have downloaded the BIOS for Satellite U300 PSU30E?

  In addition, I would try to load the default settings in the BIOS. Check it!

  Are you trying to reinstall Vista using Toshiba recovery disc or disc of Microsoft?

  Good bye

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Satellite - WIi 8 - How to use the SD card

  Windows 8 on Toshiba Satellite.
  I do not know how to connect my sd card

  I pop my card to build in reader and now what?
  Nothing happened and I don't know where to find the answer.

  Perhaps you could provide some i.e more details:
  What model of laptop do you have exactly?
  Have you changed anything in the configuration of the system?
  Do you use the Windows system preinstalled by Toshiba?

  Usually, if you insert the compatible! SD card in the SD card slot, after little time the SD card should be recognized by the system and should be visible in windows Explorer

• Satellite L450-12W - how to use the folder HDDrecovery?

  Hello

  I need to get this L450, but its owner did not get it back dvd.

  The system does not start, and he said:
  + BOOTMGR is missing.
  Press ctrl + alt + delete to restart +.

  I noticed the hard drive of 320 is divided into three partitions:
  first of all, hidden, SYSTEM, 400MiB, with the diag + flag +, and there's the Startup Manager (+ bootmgr, BOOTSECT. BAK+ and the folder + start +) and a folder called recovery + where there is a subfolder called + WindowsRE + which contains + winRE.wim +.
  second is WINDOWS, 149GiB, with the flag + start +; This is the operating system.
  in third place is given, 148GiB, no flag. Here's a folder called HDDRecovery size 6.4GiB and a folder called + MONICA-TOSH + where there are a lot of backups that I don't know how to use.

  Then, I tried to follow the manual, which know to press the 0 (zero) key when starting to start the recovery from the hard disk, but it did not work, no screen appears and the error message appears again.

  What should I do?

  Thanks, and sorry for my English, I'm Italian.

  EDIT: I forgot to say that I also tried to fix the problem with the Windows7 DVD repair tools, but he did not find any operating system with a Linux Live, I see that all the system files are in the WINDOWS partition!

  Hey Buddy,

  The HDDrecovery usable only if you are able to access the Windows Advanced Boot menu. There is an option called fix my computer which will start the Toshiba HDDrecovery.
  I put t know what the user manual you have, but AFAIK press zero will not work. You must press the F8 key to access the advanced boot menu.
  It work?

  If not, there is nothing you can do I think wait Toshiba Recovery disk Windows reinstallation. This will restore the preinstalled settings of Toshiba. If you n t have this disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Alternative you can use a Microsoft Windows disk to reinstall Windows. After that, you have all the drivers and tools from Toshiba Web site.

• How to use the resolution to 1280 * 768 on external TV with Equium A200-15i

  I have my laptop Equium A200-15i hooked to my Bravia HDTV which accepts entries to 800 * 600, 1024 * 768 and 1280 * 768.
  But my laptop will be released only in 800 * 600, 1024 * 768 and 1280 * 600 and I want to use the full screen on my TV.

  I read a few other posts on this subject and I think that the problem lies in the BIOS, and I've not being updated since I got it in September, but I was wondering too since I'm Dual-booting Vista and XP pro, there will be problems with the BIOS I download?

  There seems to be two more different for Vista and XP, who apparently get along out of each other.

  Finally, update the BIOS problem will be solved my monitor extended?
  And updated the BIOS using the BIOS XP Download break my laptop/vista partition?

  Should I just not bother with the Dual-boot and go Vista/XP only?

  Thanks in advance

  The BIOS is not the problem!

  The fact is that your display driver doesn't support the resolution of 1280 * 768, and so you can't choose it.

  Once again;
  > Finally, update the BIOS fix my extended monitor?
  No, as I said above, you can't choose your preferred resolution because it s not included in the graphics driver.

  > And updated the BIOS using the BIOS XP Download break my laptop/vista partition?
  No, but if Vista is installed on the laptop then I advise you to use the version of vista BIOS.

  > Should I just not bother with the Dual-boot and go Vista/XP only?
  Dual-boot is recommended according to me ;)
  I have dual boot on my second notebook too. Dual boot has many advantages...
  As you know from the beginning of the applications don't run correctly with Vista and if you have installed XP then you can run it without big problem ;)

  Welcome them

• Satellite L300-215 - how to use the Draft N Wlan

  Hi guys...

  I have a toshiba Satellite L300-215, who has a card Intel wifi link 5100 AGN.
  I am connected to my wireless router BELKIN N1 at a speed of only 54 Mbps...

  Is someone can please tell me what I have on my wireless card to fix uses n parameters Project installation of my laptop?...

  your

  Hello

  Your router must support the project in order to connect to the laptop using Draft N.
  In your Wlan Draft N router settings must be enabled.

  In-WLan card-> properties > Device Manager, you can find the Advanced tab.
  You will find many different parameters. Here, you have to choose 802.11 N (Draft N).

  Generally if the two option would YOU then you might be able to use the Draft N

• Satellite L350D-213 - how to use the WLAN?

  My mother & father has bought a laptop last week and are having problems with the connection to the sky broadband. Sky Broadband is a netgear router, which has wireless capability.

  My question is how does broadband on your laptop? They need to get a wireless dongle to use, my experience with laptops is minimal.

  Any help much appreciated.

  Hey Buddy,

  I think you should read the user manual. There you can find all the necessary information using the laptop.

  To use the WLAN functionality, you must enable this feature using the WLAN hardware switch on the laptop and the FN + F8 key combination. Check it!

  If the WIFI is enabled, check the configuration of TCP/IP. It s according to your router if you use DHCP or a static IP address.
  In addition you must disable management feature in the management of WLAN power supply.

• Satellite A100-192: how to use the s-video output?

  My A100-192 out s-video. Can I use it to watch DVD on screen? What is needs? Can be no problem - simple connect laptop with TV and relax. Or problems?

  Hello

  Generally all the information on how to connect laptop to TV, you should find in the manual of Toshiba which is already preinstalled on the laptop.

  The laptop supports a switch for easy display on television.
  By using the FN + F5 key combination, you can switch between display devices.
  Therefore, you must connect the laptop with the s-video cable to the TV, turn on the s-video on your TV and the FN + F5 to change the TV screen output.

  If you want to watch DVDs, you must use a DVD as WinDVD playback software.

• Satellite A45-S250: how to use the recovery CD if the DVD player does not work

  Hi all
  First of all, apologize for my English, I'm french :)

  So my problem is that I would like to re - install everything on an A45-S250 using the recovery CD.
  But the main problem is that the internal DVD player no longer exists.

  I try plugging in an external DVD drive, but the laptop won't start on it.

  I have seen that it can start with a disk, lan or SD card drive. But with opportunities of theses, how power reinstall everything include in the recovery CD?

  I may have a usb floppy drive, so I'll be able to boot from a bootable disk. but then how to start the process of recovery CD?
  I will prefer to use the recovery as a home standart WinXP CD, because I know that the OEM series will not work in an original version of Windows XP...

  Thanks for your help!

  Kubs

  Hello Kubs

  I see only one solution: you have to somehow use external DVD player and make it visible to your laptop. I try didn t, but I guess you need to start your laptop using WXP startdisc and load the MS-DOS driver for external device.
  If you will have success to access external hard drive I guess that you will be able to start the recovery procedure.

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them

• Satellite A100-233 - how to use the multimedia buttons in Linux

  Hello!

  I used to use media keys and ALTLinux on Toshiba Satellite A100-233 (who, under the power button)... Its possible? If so, how?

  PS: Sorry for my bad English... If you can answer on Russian... =)

  Hello

  Hmm these buttons belongs to a characteristic of Toshiba and this function needs special drivers of Toshiba.
  Unfortunately, there is no drivers for Linux distributions and that's why I put t think you will get these buttons work after installing Linux.

  See you soon

• Satellite P200 PSPBGU: how to use the bluetooth?

  Hello
  When I run Bluetooth Configuration (start, toshiba folder menu), it says "device Bluetooth to connect, and then click ok. But how do I connect it?
  I also tried to use Nokia PC Suite, it can not connect to my phone via bluetooth.

  Hello

  Please see the bottom of your laptop. Every laptop comes with a BT sticker BT module there.

• Satellite M30X-122: how to use the headphones and speaker at the same time?

  Hello

  y at - it a possiblity to use headphones and speaker at the same time?
  When I plug the headphones into the Jack, the speaker is created off the coast of the moment.

  Thank you
  Peter

  Hi Peter,.

  There is unfortunately no way to use both headphones and speakers at the same time. This is because tghere's a disconnection physical power for the internal speakers when you plug in the headphones. It is not by software. The only way around this would be to dismantle the headphones Jack and solder connections that are broken when you insert the headphone permanently.

  Kind regards