How to view the interactive report Max records?

Similar Questions

• How to replace the interactive report '-' for null with white columns fields?

  The reports interactive one places '-' for null column fields. In the classic report, column null fields remain just as a draft. Y at - it a setting to change how many interactive reports display columns null fields? I would prefer that it be display as the classic report and leave the fields to null as a draft column.
  
  THX
  
  Published by: jngoracle on July 24, 2010 22:43

  Hello

  Will modify your report interactive report attributes.
  In the paging section, you can change attribute "see the Null Values as".

  BR, Jari

• How to reposition the interactive report (IR) research progress indicator?

  I would like to place this "turning circle" lower that it's now - or even in the middle of the screen.
  
  Igor

  Hello Igor.

  The location of this spinning thing comes from this parameter in apex_3_1.css:

  #apexir_LOADER
  left:48%;
  position:absolute;
  top:4px;
  }
  

  You can override that by putting this code in your HTML PAge Header

  Then the circle will appear somewhere in the middle of your page.

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• How to enable detailed interactive report view by default for the user public?

  Hi all

  I'm developing a page of search results.

  I'm doing a view instead of a default table view of interactive reports. So in this case I activated the details view so that I could make the fancy designs.

  everything worked well and looked clean but however when I pass the value of my search using IR_ROWFILTER page and clear the results page using page_noIRB, it brings me to the result page of interactive reports with the default table as point of view.

  I have to press the detailed view to get. I tried to save it as a default value, but it won't work. This question is for user public.

  If I do the page requires authentication, and record the detail by default view, I wouldn't have any problem. I could search and it will bring directly in to the detail view of the search page.

  of course, the other reason that I found is because im using the IR_ROWFILTER and by disabling the page using page_noIRB... without it, it works well, but I need it coz im making a a search result. I need to send the text to search for another page and put it in the filter to the search page. I would need to use the IRB to search again.

  is this a limitation to the user public? It happened for the authenticated user but...

  How can I make the default view for the user public?

  T101_cyberdyne wrote:

  How can I make the default view for the user public?

  Reverse the report for details on the loading of the page using a dynamic action of loading the Page with the following Execute the JavaScript Code real action:

  gReport.data.view('DETAIL');

  I'm doing a view instead of a default table view of interactive reports. So in this case I activated the details view so that I could make the fancy designs.

  Do you really need is an IR? Other that the layout of detail, do you need any of the interactive features? If not, try to use a standard report with a a report model custom.

• How to add the action button for each column in the interactive report

  Hi all

  I'm new in APEX, so pls forgive my question, if it's simple, but I am struggling with this problem for days now. I have interactive report and you want to add button in each row. What I want to do with this button is the following:

  1. to execute some stored procedure in need of that particular line item values

  2. returns a (id)

  3. go in another page in the application by passing the value out of the procedure (id).

  and I'm not find the way to do it. I tried now means:

  1. If I add the link of the column, so I can refer to the value of the current row, I don't know how to call the stored procedure and perform actions of rest I need

  2. If I add the button to the region, I do not know how to reference the values in column of a particular line of the interactive report...

  and I'm stuck...

  I just forms and global report and probably still think the "wrong" way .

  Any help would be appreciated!

  Thank you!!!

  
  

  user3253917 wrote:

  Please update your forum profile with a real handle instead of 'user3253917 '.

  I request of the company: there is a customer who always orders the same standard product orders (always order the same products, fair amount is different). I want to make it simple for the user: instead of retyping the command (master and few records details every time yet) I want to copy selected command (copy of the master record and record details) so that the user will only change date order (in master record) and amount fields in record details).

  So, in order to give him:

  1. the user must be able to choose the order in which I would copy (at page 4), select it,

  2. I need to make PL/SQL procedure to insert the new master record (order) and a few record details (order_items) (copy of the order/order_items chosen in step 1)

  3. navigate the user to page 29, where the master account at stage 2 insterted appears, so that the user can change the date and quantities.

  Any solution will be highly appreciated! Thank you very much!!!

  In simple terms:

  1. Add a link to column "Command copies" in the report on page 4, which sets the COPY request and passes the order ID on page 29.
  2. On page 29, create a process before header, sequenced to be the first process executed and conditional on REQUEST be EXEMPLARY, which creates a new order as a copy of the order with the ID from page 4 and returns the ID of the new order in the PK command ID of 29 page element.

• How to view the text onto an interactive button in Indesign CC?

  How to view the text onto an interactive button in Indesign CC?

  I'm doing my map.

  I am now able to link a button in my card to a website url, but what I really want is a way to make the text appear next to a button, it shows what kind of construction is by turning over with the mouse.

  One?

  

• How to view the report by using the style of calendar in obiee

  Hello
  Can someone tell me how to view the report as the calendar?
  When I choose chrystelle, it displays 31 days. 7 column, from Sunday to Saturday, and each cell displays the detailed information, such as sales from today!
  Thank you!

  Hello

  Please foloww the below blog...

  http://bischool.WordPress.com/2010/10/22/calendar-view-in-OBIEE-and-applications/

  Thank you
  Vincent

• How do I call the interactive report procedure?

  Hello
  Is possible that call the procedure in an interactive report on the APEX?
  Because
  in the source of the region, he asked only the sql statement so I'm confused and I don't know how to call procedure interactive report?
  
  Published by: esra aktas on 12.May.2011 11:04
  
  Published by: esra aktas on 12.May.2011 12:05

  And your procedure returns the data? Why you don't run in an area of pl/sql?

  Or better yet, a page with two 2 areas of installation

  Region one is of html with your controls to display, and then select the procedure to run from a selection list. When your selection list returns and have a running process that takes this value, select the code you want on your table and he published on a page element.

  second region would be a region of sql report, which uses a function returns sql to select necessary sql, using the code met at step 1...

  Thank you

  Tony Miller
  Webster, TX

  On the road of life... He has "windshield", and there are "bugs".
  (splat!)
  "Squeegees wanted."

  If you answer this question, please mark the thread as closed and give points where won...

• How to change the column ordering the interactive report?

  How to change the column ordering the interactive report?

  Hello

  Run the report as a developer, click on the "wonder wheel", click "Select columns" and reorder your columns in the box 'report '.
  Then click again on the "wonder wheel", click on save report and save the default state.

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• How to make added columns to be visible by default in the interactive report?

  Hello
  
  I added two columns of an interactive report.
  When I run the page, added columns are not visible.
  Then I made them visible through the option "select columns".
  But next time when I connect to those two columns are still invisible.
  How can I make either added columns visible by default in the interactive report?
  
  Thank you
  Guy

  I had this problem: you must run the report as a developer and include the option "actions." Then, when the report as you want (ie: you change when executing it) use the Action save to save the default layout. You then see this return in the development environment and that's what it's going by default for users.

  I hope at least that's the answer!

  Kind regards
  Steve

• How can I rearrange the columns in the not displayed section of the interactive report.

  Hello

  My interactive report contains 185 columns and requieres users to build its reports with some columns, but he gets lost between this amount of columns, it would be easier if the columns in the do not display the interactive report section would be automatically sorted, is it possible?

  Thank you very much

  Hi Eva,

  A solution would be to order the column names in alphabetical order. You can create a dynamic JavaScript action to manage the sort.

  The shuttle of the attribute IR "Select columns" have the ID "apexir_SHUTTLE_LEFT" or hidden columns and 'apexir_SHUTTLE_RIGHT' to the displayed columns.

  The function that you create might look like:

  var options = $('select#apexir_SHUTTLE_LEFT option');
  var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
  arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
  options.each(function(i, o) {
    o.value = arr[i].v;
    $(o).text(arr[i].t);
  });
  
  var options = $('select#apexir_SHUTTLE_RIGHT option');
  var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
  arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
  options.each(function(i, o) {
    o.value = arr[i].v;
    $(o).text(arr[i].t);
  });
  

  You need to find the right timing for dynamic action to run, I suppose the click on the button "Select columns" would do the trick.

  Kind regards

  Vincent

  http://vincentdeelen.blogspot.com

• How to increase the size of the column in the interactive report

  Hi, I use apex 4.2 and 25 theme...
  
  
  I found no option to increase the size of the column in the interactive report. When as usual report, I can do it,
  
  Please guide me to achieve.
  
  
  Thank you
  Nihar Narla

  Nihar Narla wrote:
  Hi, I use apex 4.2 and 25 theme...

  I found no option to increase the size of the column in the interactive report. When classic report, I can do

  This can be done using CSS. Create a rule like this in CSS Inline property page:

  .apexir_WORKSHEET_DATA td[headers="COLUMN_ALIAS"] {
    width: 10em;
  }
  

  where alias_de_colonne is the alias of the column in the report query and the width measurement, that's all you need.

• Apex 4.0 how use the interactive report filter feature?

  Hi all
  Sorry for the nub question, but if there is a way to create and save 'report' with the filter condition using a function?
  What I want to do is to create an interactive table called TASK report.
  Table has two columns I want to use for filtering:
  FDate - DATE - date
  TDate - DATE - to date
  Then, I need to create multiple saved reports:
  last week the tasks = where FDate between sysdate - 7 AND sysdate...
  last month tasks = where FDate between ADD_MONTH(sysdate,-1) AND sysdate...
  but,
  Interactive report filter does not accept sysdate or calls to functions ADD_MONTH.
  Is there an easy way to configure this feature?
  TIA
  Thomas
  
  Sorry for the double post...
  
  Published by: thomaso on August 6, 2010 12:04

  Hi Thomas,

  Take a look at the type of filter 'Row' in the interactive reports filter dialog box. This allows more dynamic filters, such as those involving SYSDATE or ADD_MONTHS calls. See also the next thread for some more details on this:

  Re: Interactive report - line conditional highlighting date function

  It will be useful.

  Anthony.

• How to remove the link to the interactive report columns!

  Hi all
  
  I'm building an interactive report based on pl/sql block.
  
  In the report, I get the columnnames with link (underlined). I'm confuse when I have the chance to see the names of columns like AGE_SEX, AGE_SEX_
  
  When I see these columns of interactive report, it seems to be as same as the underline covers underscore.
  
  Is their anyway I can remove the link to the interactive report columns.
  
  
  I selected the link column exclude from the column heading in the report but still attack link gets the link in the column.
  
  Appreciate your help.
  
  Thank you/kumar
  
  Published by: kumar73 on May 5, 2010 14:32

  Hello

  Try the place for HTML page header

  Hope that I did not understand what you are trying

  BR, Jari

• How to display data in the interactive report without colon (:)) column

  Dear gurus of the Apex,
  
  I am a beginner and you just create an application for the Apex of a worksheet. I created a list of named values and used in a box against a field in the page creation form default 3.
  
  When I selected several values in my box on the form, the data in the interactive report appear as a single line with a colon separating the values selected as follows: dog: Cat: bird
  
  What I would like is to have the data appear in the interactive report in a list like this multiline column:
  
  Dog
  CAT
  Bird
  
  I can work around this problem by modifying the SQL code in the Source region of the definition of the area of the report (interactive 1 Page by default) to replace the semicolon by < br >
  
  SELECT replace ("PETS_CHOSEN", ":","< br / > ')"PETS_CHOSEN", OF"MYAPP"Note: this is not format correctly in the display. I have replace the colon with a html br
  
  This works, but there seems to be a hack to me. I guess I missed an option simple setting somewhere, but I can't.
  
  The other problem with this solution is that when I export the report to Excel, that ship's dog < br > cat < br > Bird, which is seems worse than the colon.
  
  Thank you
  
  -Morgan
  
  Published by: mnrussel on February 16, 2009 04:13

  Hi Morgan,.

  I think you have at least two possibilities:

  1. replace the colon with "," (comma and space) - kind of reasonable on the screen and export

  2 create a second page that has the same report but use it "export: csv" model. Create a manual link to this page to replace the standard export binding. When these pages of the report are requested, they download immediately instead of display. So you can use commas in this one and < br > tags in the report to the screen version

  Andy

  ch - to display the tags in a post, use and lt; for < and & gt; for >