Satellite L750D - keyboard & touchpad has stopped working
Hello guys
My keyboard & touchpad stopped working today.
Its a Satellite L750D Part # PSK36A-009008 7B339221W serial No.
I tried a restore to an earlier date
Can anyone help
PLEASE, I BEG YOU.
Sounds like a hardware problem.
Try to configure the computer laptop back to factory settings. I guess you have to use an external USB keyboard in case the internal keyboard does not work.
Here is an instruction how to perform a system restore?
http://www.MyToshiba.com.au/support/items/how-to/230
Your comments would be greatly appreciated
Tags: Toshiba
Similar Questions
-
Satellite C series - Touchpad has stopped working Windows 8 running
Hello
I put t know if anyone can help.
My touchpad has stopped working.
At first, it only works on the login page. Now it s not there at all.I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.Help please
Hello
Please check this Toshiba document:
+ How to change the settings of the Synaptics touchpad in Windows 8? +
http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htmDon't forget that the necessary parameters of the touchpad are enabled!
-
Satellite 1900-303 Touchpad: has stopped working
The touchpad on my Satellite 1900-303 has suddenly stopped working for no apparent reason. The touchpad icon has disappeared from the office toolbar & I do not see the touchpad listed in Device Manager. However, the ALPS touchpad driver is listed in the installed programs.
The laptop runs on XP Pro SP2. Can anyone help with this please?
Can you imagine that the TouchPad is defective and this may be the reason why it doesn't work?
-
Satellite C660-1F1 - touchpad has stopped working
I just did a windows update and the touchpad stopped working.i have uninstalled and rebooted but it didn't help. Under the tab in the properties of the mouse it say material of "this device cannot start code 10".
Can anyone help please?
PaulGo to Device Manager and uninstall the device by following this step:
a. click the Start button.
b. Manager type of devices in the search box and press on enter.
c. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
d. click on the view tab, and then select devices show hidden.
e. check to see if you find any device with an exclamation mark on it.
f. If Yes, right-click on it and select uninstall.Once you uninstall the device, restart the computer so that the changes take effect.
-
Satellite A500-1F7 - Touchpad has stopped working
Hello, my touchpad does not work.
Yes its possible, I updated and reinstalled the driver. It actually worked for a few seconds and then stopped again.
Hope you can help me.
Thanks and greetingsHello
The touchpad does appear in Device Manager correctly or you see a yellow exclamation point?
What operating system you have?And have you tested an external mouse? It does not work or shows the same strange behavior?
Theoretically worse that the touchpad could be faulty and needs replacing in such cases, an ASP would help you.
-
After cleaning the laptop keyboard, Touchpad has stopped working.
Original title: Touchpad not working not
Help
I use a Compaq 615, my Touchpad no longer works after you have cleaned my laptop keyboard, but when I checked the setting of the control panel mouse it says "work unit". How can I get the touchpad working again.Hello
This problem may occur if the Touchpad settings have changed.
You can try to reinstall the latest drivers for touchpad on HP website and check if it helps.
a. click Start, select Control Panel.
b. double-click Systemclick on hardwareand then click device Manager.
c. click on the PLUS SIGN to expand unit.
d. click twice on the device driver.
e. on the Driver tab, click on Uninstall.
f. restart the computer.
If the problem persists, you will need to contact HP support for help.
Hope the helps of information.
Let us know if you need help with Windows related issues. We will be happy to help you.
-
On Satellite Pro P300 touchpad has stopped working
Hello.
I have a Satellite Pro P300 equipped of Vista and the scrolling feature broke on my machane too.
I also lost the touchpad icon in my taskbar and function to configure the touchpad.I've uninstalled and reinstalled the drivers, nothing works.
If I had more hair, I would probably be pulling it. Help, please.
Thank you
Hello
What drivers you have reinstalled exactly? Normally, you can download all the drivers from the official website of Toshiba:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversHave you tested the scrolling feature using an external mouse?
-
Satellite C850-F31Q - touchpad has stopped working
This is the 5th time I use my laptop. (Just for 4 weeks now) My touchpad / mouse pad does not work anymore. I tried to install the new drivers, but still no luck. I'm running of Windies 7 and also have a (thankfully) - wireless mouse but it gives also some problems.
My main concern is that the mousepad on laptop does not work.
Help, please.After reading your ad, it is not easy to say what the problem is here. Who knows what's happening with your touchpad?
Are you using the original Windows 7 that you got with your laptop?
You can enable or disable the touchpad by using the FN + F9 key combination? -
Satellite Pro A300 Touchpad has stopped working
As the title suggests.
My laptop is a Satelltie Pro A300 2 4.
The Touchpad is not responding,
I tried FN F9 - nothing happens.
I tried pressing the upper left corner of the Touchpad - nothing happens.
I tried to go to the mouse control panel and looking for an enable bit Touchpad cannot find the mouse set.The operating system is Windows 7
Hello
Have you tried to install the driver for the touchpad?
You can find the driver for the touchpad on Toshiba UE driver page.Extra tip: in some cases possible to enable and disable the touchpad in the BIOS.
Please check this!By the way: is an external USB mouse attached to the laptop? If so, unplug it and try to use the touchpad
-
Satellite A200 - touchpad has stopped working
I have a Toshiba Satellite A200. Touchpad has stopped working, I can no longer scroll. I tried all the settings, but it did not work.
What should do?
Why you n t trying to update or reinstall the driver of the touchpad?
I think that this should be done first of all, you can download the compatible driver since the European driver Toshiba page and could reinstall it.
Concerning
-
Touchpad has stopped working on Satellite A30
The touchpad has stopped working, I tried most of what is obvious
any ideas?Hi Phil,
I assume you tried Fn + F9? This combination activates / deactivates the touchpad on and outside.
HTH
-
Touchpad has stopped working in my Satallite L850
Hello
My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?
Kind regards
DAV> Touchpad has stopped working in my Satallite L850
How to understand this?
You can toggle touchpad by using the FN + F9 key combination?
The touchpad driver is installed correctly?
Touchpad is listed in Device Manager? -
Tecra A8 - Touchpad has stopped working
Hi all!
I have a Tecra A8 (model: PTA83E) who has an ALPS touchpad. The touchpad has stopped working even if it is visible and fully operational in 'Device Manager' and also the 'Control Panel '. Apparently there is nothing wrong with it but the touchpad does not meet the clicks or touchs, it seems as if it has been disabled, but said, in Device Manager, the information is 'this device is functioning.
I updated the OS to Windows 7 Enterprise and I would like to activate the touchpad if not I should always use a usb mouse. I searched the touchpad drivers but it seems they are Don t.
This is the information that I can view in "Device Manager", about the pilot:
-Controller version: 7.0.302.3
-Date: 26/09/2006Thanks to you all.
Hello
You have activated the touchad by pressing FN + F9?
-
Who knows what the solution to the message "Microsoft keyboard driver has stopped working?
Who knows what the solution to the message "Microsoft keyboard driver has stopped working?
Hi Raymond,
Thanks for the quick response.
The question you posted would be better suited in the Logitech Forums. I would recommend posting your query in the keyboard Logitech Support.
Keyboard Logitech support
http://www.Logitech.com/en-us/support/keyboards
If you need further assistance on all issues related to Windows, just tell me and we will be happy to help you.
-
Satellite A300-243 - keyboard and touchpad has stopped working
Hello everyone
I have a serious problem in my Satellite A300-243. I installed a driver for external keyboard using a CD and once I rebooted both keyboard and touchbpad stopped working and to make any order, when I reached the vista welcome page.
What should I do because you know that even if I can't get into the windows to uninstall this driver.Any way to do during windows startup?
Hello
Why you installed a driver for external keyboard? I've never heard of such drivers
Anyway, you should try to start in safe mode and then you are able to remove driver external keyboard to the list of software. After I restarted in normal mode, the keyboard and the touchpad should work properly again.
Maybe you are looking for
-
Why Thunderbird "will not send" tells me that he needs a STARTTLS command
When I try to send a message from one of my addresses, I get the following message "An error has occurred when sending mail. The mail server responded: 5.7.0 must issue a STARTTLS command first. Please make sure your e-mail address is correct in your
-
Satellite C640 - 118 PSC2NE contains Bluetouth feature?
I bought labtop Toshiba C640-118 - psc2ne - 005001AR with windows 7 homeWhen I upgraded to Win 7 ultimate 64 X driver bluetouth keep on asking me to plug the blotouth driver and press ok.
-
Problem trying to recover from a Rescue &; Recovery DVD.
-
PCI simple communication has disappeared
Suddenly my Windows 7 does not recognize my DVD burner/player, nor will it identify my second hard drive. I get an error message telling me that my PCI controller is not installed. HELP, please. I plugged a USB key and get a message telling me that i
-
Update of the RVS4000 firmware to ver 2.0.3.2
Hello I have the version of the firmware 2.0.2.7. I have loaded down the firmware version 1.3 update utility and don't see me a reading or help file. I disconnected the cables according to the guidelines, but receive a "diffusion error" and a "Brows