How to wipe & restore PH3100U-1EXB to factory default configured using Vista?

Similar Questions

• How can I restore my computer to factory settings with using the computers original disc?

  Original title: ' ideas: insert an error code or give a brief description of what you're trying to accomplish or difficulty. " __ »

  I want to know how I can restore my computer settings to factory with using the original disk of computers or to create a recovery disk

  Here you are options to reinstall Vista:

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to add programs to the start of the file using Vista

  How to add programs to the start of the file using Vista

  Hi Harry,.

  Oddly enough, you can actually do it in msconfig except if it is already there and simply not checked as opposed to not being do not at all (although you would think that they would understand this option).

  The easiest way is to add the program (or a shortcut to the program) in the folder all Menu Programs Startup.   Here is the procedure: http://www.ehow.com/how_5098465_add-startup-programs.html.  Remember, to do this, you must either a shortcut existing (perhaps on the desktop or elsewhere in the menu all programs) or you need to find the source file (probably somewhere in C:\Program Files depending on what you want to add) and either copy it and add it to the startup folder or right-click on it and create a shortcut to copy into the startup folder.  Once you reboot, this program starts during the initial commissioning process and you will now be able to control using msconfig.exe, if you wish.

  Another option is to do this by using the registry editor.  If you decide to try this, first create a restore AND system restoration point backup of the registry before you begin.  Here is the procedure: http://www.ehow.com/how_7304438_add-program-msconfig-regedit.html.  I recommend to use this ONLY if the previous procedure does not work for some reason any as long as that the procedure is simpler and safer.

  If you want a simpler way to manage and control startup programs, you can try it free WinPatrol http://www.winpatrol.com/download.html that change monitors for startup programs if you set it to run in real-time so that you know when to try new programs are added to your Start menu and, for the purposes of this question includes an Add button which opens a link to a window of Windows Explorer where you can browse the program you want to add, click open to select and then add it directly to the commissioning.  If you prefer it does not work all the time, you can simply uncheck the box which includes this program and it will work only when you choose to run (but at the start, will work as an indication otherwise or configured).  It will appear not in the start menu in all programs (Finally, WinPatrol is, but not programs, it adds to the start), but it will appear in WinPatrol (which also lets you manage what you want or not start with checkboxes as in msconfig) and sure in msconfig - but only after a reboot is complete the process of adding.

  I hope this helps.  Personally, I use WinPatrol myself and let it run in real time.  Since I do a lot of installations, it helped me often prevent the addition of a startup item I haven't really need and reduces how many times I actually need to check what is happening out there.

  If this answers your question without the need to repost in another forum, please mark it as an answer.  If this isn't the case, then of course you must republish as suggested above.

  Good luck!

• At startup I get "' 0251: System CMOS checksum bad - default configuration used." " How do I fix this?

  On startup, I get '0251; System CMOS checksum bad - default configuration used"and I have to reset the date and time. How can I fix this?

  Sounds like your bios cmos battery may be defective.

  How you replace depends on your PC make and model

• How do I restore my laptop to factory settings?

  Toshiba how to restore factory settings (by pressing 0 on boot dosnt work)?

  Hi guys

  How can I restore my Toshiba L650 to factory settings? I haven't tried the 0 to start any work that I have installed a new version of w7 (from home premium to professional) and it is a little screwed to the top of my drivers and all Toshiba software.

  Thanks in advance!

  * ADDITIONAL INFORMATION * when I press ESC I get a red screen with white writing that says windows ith slic, windows without loader, windows with charger lic (US alternative method) etc... F8 lead me to repair your computer safe mode tc... fix your computer doesn t do anything to restore the factory settings. I heard on the bios, there is a button that takes u can't find it... Thank you again once in advance guys
  BTW I can't download the drivers, I m getting pretty annoyed now!

  Can I do a USB recovery?

  Installation procedure for recovery image, and how to do this, you can find on following Toshiba document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  > I installed a new version of w7...
  Did you clean Win7 excavation or update?
  Problem is that once the clean OS install of that you will not access the recovery image saved on the HARD drive and the best option for the installation of the system recovery disk using. Did you create recovery discs after recommendation of Toshiba?

  You cannot create USB recovery on this notebookmodel.

• How long does it take to restore a computer to factory default

  I play a factory default restore... it is supported for half an hour... how long should it... something is wrong... .this which I do...

  Hello:

  On some models of PC consumers, it may take a few hours.

  I would give it 2-3 hours.  If it is not done yet, then try again.

  Make sure that nothing is connected to the laptop but the battery power and power.

• How to get wifi connection after reinstalling factory default DVD for Iconia W3-810?

  My W3-810 Iconia has been reset using Acer Recovery DVD. After that 8 window has been restarted, he not been able to find the wireless device.

  Does anyone know how to get a wifi connection after reinstalling factory default DVD?

  Best is to download the drivers for a different machine, then transfer to the W3 with a USB or SD card. Once they are installed included you be back running.

• How can smartphones blackBerry I restore my phone to factory default?

  I'm having a lot of problems with my phone-people cant hear anything when I call them, I can't answer calls, internet is VERY slow even on wifi. How to restore my phone to default factory settings?

  Thank you

  Tom

  If back to the factory setting, it is what you intend to do, follow these steps.

  From your home screen, go to Options > Security > Security wipe and follow the directions.

  As a precaution, always backup your data via Desktop Manager before proceeding.

  Good luck with your decision.

  P.S. If you're not pressed huge to wipe it, we could look at each individual item to see if we could resolve.  You're ready to tackle each of them with us here first or you jump in the decision of security wipe?

• How can I restore my system to factory settings, after replacing the hard drive?

  Original title: I have a hard nine; how I can start or put in the back of the recovery disc to my old sistem all gane

  I need help to start the recovery disc, in all new hard drive, in order to restore my system whole back

  Hello

  You can boot from the DVD drive with the recovery disk and then follow the manufacturers installation instructions

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• How can I restore my cpu to factory settings

  tsj215

  I need help. It seems that I have on the same topic so apprently my partitioned original disc where recovery is sopposed to be is on the other partition. I have even a file that says (recovery of move) and the date it happened that I had only had the pc 2 months at the time my questions are this
  1 Although I have my restore disk tht was made when I brought her home, it is not clear, instructions for use and the closest to you I could find said put in the closed disc then reboot... and at this point where the system will be basically take control his does not work

  2 How to use the restore recovery which has been done apparently just before moving out of the partitioned drive
  Please help my system worsens every min

  Melissia

  Hello

  a restore point lets you not reinstall vista

  a restore point puts the computer settings to an earlier point in time

  That's all

  If you have problems with the recovery discs that you did or the process of recovery in general you will need to contact the manufacturer of the computer

  It's their recovery process not microsofts

  and you don't have to boot from the recovery disk and follow the prompts

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and here is the General information on the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Save all data, because it will be lost, do the above

• How can I restore my computer to factory settings?

  Original title: looking for professional help, big questions.

  Hello, I have a Dell Latitude d630 laptop, and it has some major problems, I can not understand.

  I am running windows xp service pack 2

  for one my mouse keeps moving left and right all by its self, not even try to figure this again

  I have a hidden player called drive X, it is also the boot drive, the only way I can access this hard drive is by selecting the

  also repair option when installing my software, this disk is write protected. Don't know, I installed a new hard drive and drive X

  rest, I installed new memory chips and still have the X drive, I don't know where else to look, where this information

  can be stored.

  I try Dariks boot and nuke, kill the drive, tried to format it, tried to remove all across BACK, once I turn the system

  stop and restart, all the information is back.

  also the files and folders have a tendacy auto recover, when deleting files and folders through BACK I get access denied much, have

  tried using Calc to support, but it don't work, suggestions for anyone who would be appreciated, I'm at the point where I am

  ready to pull my hair.

  Looking for programs or on back of syntax remove items from memory, I know that LH high load is used to put programs in upper memory

  blocks, but how do get out you? you are looking for a way to defeat the drive is write-protected, so that I can remove that darn pesty X drive.

  and anything else you might think you will help. tried sdfix download, but I can't, whenever I get to a link where I can download it

  Windows crashes. Help!

  Considering everything you wrote, your best option is to take the laptop to a reputable local computer professional, not a BigBoxStoreUSA or GeekSquad type of place.

• How can I restore audio to the factory specifications?

  I use Skype with success and then decided to try to record something.  Now I can't be heard on Skype, and I don't remember what I did to change the settings.   How can I get the default back to the original settings?

  You probably have to go that far.

  First make sure that:

  in the Skype that your microphone is set as the default input device.

  * in Control Panel > sounds, make sure that the microphone is also chosen as a default entry camera to (record)

  * Double-click on the speaker icon in the systray and make sure that the microphone recording options, is the input device (check).

  If people still can't hear you, re-post giving number of make, name, and ref of PC/Laptop.

  See you soon,.

  Jerry

• How can I restore my computer to factory settings so that I can give it with peace of mind about my personal information?

  I would only delete personal files.

  Hello

  Remove only the personal folders is not the way to do

  Everyone can recover with the software of data recovery and your user account name, parameters, etc rest...

  And if everyone would recommend "Dban"; who will even remove any recovery partition (which if necessary for purposes of relocation), because it deletes (as its default action) information on any hard disk that it finds in your computer and you need to reinstall the operating system.

  The way to do what you want to do is to reinstall the operating system that your header request initially (but remember the only way to know that your data is never recoverable is to physically destroy the hard drive!).

  Here are the various ways to reinstall the operating system:

  Contact your computer manufacturer and ask them to send a set of recovery disks to reinstall from.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer (this is why I did not recommend the use of Dban).

  The recovery process can be started by pressing a particular combination of the key or keys at startup.

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• How can I restore my pc to factory settings?

  I want to restore my computer by default. I have a dell dimension E521 and its windows vista. I did not the recovery discs and I can't restore my pc to an earlier point.

  Message edited by sonia01 on 12/06/2008 18:47
  Message edited by sonia01 on 12/06/2008 18:49
  Message edited by sonia01 on 12/06/2008 18:50
  
  

• How to reset the airport extreme to factory default

  My Airport & time capsule are not connected to the modem, saying no dns server is available, however the modem works when connected to the computer. (Macbook) After hours of troubleshooting, I would just restore default settings and see if I can get it going again. Can anyone provide info on restoring the default settings?

  Thank you!

  • Turning off AirPort Extreme for a minute or two
  • In the reset button on the back of the AirPort Extreme first... and keep taking them for 7 to 8 seconds... while simultaneously you reconnect the power on the AirPort Extreme.  (This step is a bit complicated for most users, because it takes almost 3 hands to do it properly)
  • Release the reset button to zero after the period of detention and allow a minute for the AirPort Extreme back on the way to a slow, flashing amber light status

  AirPort Extreme is now back to the State it was when you took it first out of the box.