How to write < Cntrl > Z to the port

Similar Questions

• How to write a query for the data exchange between two columns?

  How to write a query for the data exchange between two columns?
  
  I tried a request, does NOT work.
  

  update tmp t1 set t1.m1=t1.m2 and t1.m2=(select t2.m1 from tmp t2 where t2.student_id = t1.student_id)

  Thank you.
  
  Published by: user533361 on October 23, 2009 14:04

  Just plain and simple:

  update tmp t1
   set t1.m1=t1.m2,
       t1.m2=t1.m1
  /
  

  SY.

• How to give full access to the port to laptop

  Hello! I need help.
  I get data using xbee connected to the port of the laptop. The problem is with the increase of baud rate, time of receipt does not increase as it is.
  My instructor told me that your com port does not provide complete space to your software (LabVIEW). My question is how to give full access to the com port to LabVIEW? Kindly help...

  Here's my vi... I put the 115200.But baud rate in labview so I get the data and it intrigues, it traces precisely after 8 seconds. But I put the shipment time less than 8 seconds, it does not trace accurately.

• How to write this query in the hierarchy

  Hi gurus,

  Really need your help on this query.  Thank you very much in advance.

  SELECT
    t1.key as root_key ,
  (SELECT
        t2.unit_id AS unit_id 
        level-1 AS level ,
        t2.name,
        t2.creator
      FROM
        tab t2
        START WITH t2.unit_id       =   t1.unit_id            -----check each node as root
        CONNECT BY prior t2.unit_id = t2.parent_unit_id
  
    )
     t1.name as parent_unit_name
  FROM
    tab t1
  

  I'll write a query of the hierarchy as above, and that EACH line (node, totally more than 10200) is checked as root node to see how many sheets are accessible for her... It must be implemented in a single query.

  I know inline query should NOT return multiple rows or multiple columns, but the inline elements are necessary and can certainly be made in a correct solution.

  (env):

  Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production

  PL/SQL Release 12.1.0.2.0

  )

  Test data:

  select 1 as unit_id, null as parent_organization_unit_id, 'U1' as name from dual
  union all
  select 2, 1, 'U2' FROM DUAL
  UNION ALL
  SELECT 3, NULL, 'U3' FROM DUAL
  UNION ALL
  SELECT 4, 3, 'U4' FROM DUAL
  UNION ALL
  SELECT 5, 2, 'U5' FROM DUAL
  UNION ALL
  SELECT 6, 5, 'U6' FROM DUAL
  UNION ALL
  SELECT 7, 6, 'U7' FROM DUAL
  UNION ALL
  SELECT 8, 5, 'U8' FROM DUAL
  UNION ALL
  SELECT 9, 5, 'U9' FROM DUAL;
  

  Final result should be like this

  key unit_id,    level,   name, parent_name
  1    1    0    u1      u1
  1    2    1    u2       u1
  1    5    2     u5      u1
  1    6    3     u6      u1
  1    7    4    u7       u1
  1    8    3    u8       u1
  1    9    3     u9      u1
  2    2    0     u2       u2
  2    5    1      u5       u2
  2    6    2     u6       u2
  2    7    3      u7      u2
  2    8    2      u8       u2
  2    9    2      u9       u2
  
  

  Don't know how get you your output, it does not match your data...

  with tab as)

  Select 1 as unit_id, null as parent_organization_unit_id 'U1' as the name of double

  Union of all the

  Select 2, 1, 'U2' FROM DUAL

  UNION ALL

  SELECT 3, NULL, 'U3' FROM DUAL

  UNION ALL

  SELECT 4, 3, 'U4' FROM DUAL

  UNION ALL

  SELECT 5, 2, 'U5' OF THE DOUBLE

  UNION ALL

  SELECT 6, 5, 'U6' OF THE DOUBLE

  UNION ALL

  SELECT 7, 6, "U7" OF THE DOUBLE

  UNION ALL

  SELECT 8, 5, 'U8' FROM DUAL

  UNION ALL

  9. SELECT, 5, 'U9' FROM DUAL

  )

  Select dense_rank() key (order by connect_by_root unit_id), unit_id, level - 1 as 'LEVEL', connect_by_root name root_parent_name

  t tab

  Start with parent_organization_unit_id is null

  Connect prior unit_id = parent_organization_unit_id

  KEY	UNIT_ID	LEVEL	ROOT_PARENT_NAME
  1	1	0	"U1".
  1	2	1	"U1".
  1	5	2	"U1".
  1	6	3	"U1".
  1	7	4	"U1".
  1	8	3	"U1".
  1	9	3	"U1".
  2	3	0	"U3".
  2	4	1	"U3".

• How to write a query for the given scenario?

  Hi all
  
  I have two tables EMP, DEPT with data below.
  EMP TABLE: -.
  SAL DEPID EMPLOYMENT ENAME EID
  111 RAM 1500 10 MANAGER
  222 SAM ASST MANAGER 2000 20
  KALA 333 2500 10 REGISTRAR
  444. BIMA 20 3000 MANAGER
  CHALA 555 MANAGER 3500 30
  RANI 666 ASST MANAGER 4000 10
  777 KAMAL MANAGER 2400 10
  
  DEPT TABLE: -.
  
  DEPID DNAME
  XX 10
  AA 20
  30 ZZ
  
  Q1: I want the sum of the salary of each Department and for the particular job. Here, in each Department manager, Assistant Manager, clerk positions are there.
  I want to display the result as below...
  10-20-30 JOBS
  --------------------------------------------------------------------------
  MANAGER OF 3900 3000 3500
  ASST MANAGER 4000 2000 NULL
  THE CLERK 2500 NULL NULL
  
  Please tell me how to write a sql query?
  
  Thank you
  SAI

  SQL> SELECT job,
    2         MAX(DECODE(deptno, 10, sum_sal)) "10",
    3         MAX(DECODE(deptno, 20, sum_sal)) "20",
    4         MAX(DECODE(deptno, 30, sum_sal)) "30"
    5  FROM (SELECT deptno, job, SUM(sal) sum_sal FROM emp GROUP BY deptno, job)
    6   GROUP BY job;
  
  JOB               10         20         30
  --------- ---------- ---------- ----------
  CLERK           1300       1900        950
  SALESMAN                              5600
  PRESIDENT       5000
  MANAGER         2450       2975       2850
  ANALYST                    6000
  
  SQL> 
  

• BlackBerry 10 how to write e-mail in the form of text and NO HTML?

  Hello

  I now use a brand-new Q10 of Blackberry and also a Q5 brand new.

  How can I write e-mails as text and not in the html code?

  Some of my business partners cannot receive emails from my blackberry because their

  usually the firewall blocks the html code.

  OK, the only email text is on 10.2.1

  Your response confirms that.

  Who is your service provider mobile (you have filled in this part of your profile on the forum here)?

  Most have released the 10.2.1 and if yours does not, you can update manually if you want, I can give you instructions for this if necessary.

• How to write and read from the cache in Labview?

  
  

  Hello

  I would use "the spreadsheet file reading" to read serial numbers stored on your hard drive. If your file has each serial number on each line of reading spreadsheet file will return an array of 2D with the first column containing numbers. Then use 'Index Array' to get a 1 d of your serial numbers table. In your loop, you will then use VI 'Picture 1 d of research' to check if the SN is in the table. It returns-1 if its not found. If to use build table to add the serial number. Then use 'Write the spreadsheet file' to save the new list of serial number in line.

  Hope this helps

• How to write to .subckt with the function I - V

  Hi all

  Now, I am trying to build a Spice model for a type of diode high voltage for 13 Multisim. Because I do not have the LED electronic settings, and I only have the function of the I - V, I tried to write a file .subckt for him.

  Assuming that the anode is A1 and the cathode is A2, the current flowing through the diode can be expressed only by the function:

  I=((0.581*(V(A1)-V(A2))*(V(A1)-V(A2))/3/3-18.4*(V(A1)-V(A2))/3+144.66)/1000)*U((V(A1)-V(A2))-53)

  With her, I wrote a .subckt:

  . SUBCKT LED A1 A2
  B1 A2 A1 I=((0.581*(V(A1)-V(A2))*(V(A1)-V(A2))/3/3-18.4*(V(A1)-V(A2))/3+144.66)/1000)*U((V(A1)-V(A2))-53)
  . ENDS LED

  This model works well under the IV parser in Multisim 13, but when I connect 2 or 3 of them in series and make a simple circuit simulation, I always get the error report and not always not correct the error.

  Any body can help me to check if my .subckt is correct or not? Thank you.

  It seems that the convergence error is caused by a discontinuity the diode to connection 53V.  Run DC scan using the test circuit.

  

  To prevent the discontinuity, use the express following with the fi works instead. You can give it a small current when V (A1, A2) is less to 0V.

  B1 A1 A2 I=if(((V(A1)-V(A2))-51)>0,((0.581*(V(A1)-V(A2))*(V(A1)-V(A2))/3/3-18.4*(V(A1)-V(A2))/3+144.66)/1000),-230u)

  The attached circuit have a resistance using convergence.

  You can simplify your expression for readability:

  -(V, (A1), (A2) V) = V (A1, A2)

  -If you can do the expression in this form, it will simply be the calculation ax ^ 2 + bx + c

• How to write image files in the current folder in the Release version

  I'm able to do in the sims and on real devices in debug mode, but for some reason when I'm building a Release version I can not write in the current folder. I get write errors.

  I want to write the image easily in qml files in this folder as read when I write in the current folder.

  Write to the data directory instead - unable to write to the application folder & active

• How to write a graphic of the ADF to ppt?

  Hello

  I have a jspx ADF page, in which I show a simple ADF bar chart. It is a component of the deep venous thrombosis.

  The requirement is to write and export this graph on PPT file on a button click.

  I searched a lot for this google, but did not find anything comprehensive.

  We use Jdev 11.1.2.3.0.

  Help on this will be really appreciated.

  Thank you

  Tejas

  Hello

  It was not possible to directly write the graph of DVT to PPT.

  To meet this requirement, I had to go a little twisted way.

  The solution worked under the path:

  -Create the PST component binding in Backing Bean.

  -Binding decision-making using the ImageView from the graph of DVT. Then export this ImageView to the filesystem to the PNG Format.

  -Then read this image file and pass it to the Apache POI API for writing on PPT.

  -Delete the Image file.

• How to write queries nested using the DB adapter?

  I want to write a request nested by using the help DB adapter box...

  SELECT INVOICE_ID, FILE_NAME IN BILLING_INVOICE_PDF_V where FILE_ID =)

  (SELECT MAX (FILE_ID) FROM BILLING_INVOICE_PDF_V WHERE (INVOICE_ID = '12345'))) ;

  Thank you

  RAM.

  Hi Ram,

  It's probably the semicolon at the end of the SQL statement that causes the db adapter for error; Simply enter the SQL custom without a semicolon at the end.

  SELECT INVOICE_ID, FILE_NAME IN BILLING_INVOICE_PDF_V where FILE_ID = (SELECT MAX (FILE_ID) OF BILLING_INVOICE_PDF_V WHERE INVOICE_ID = '12345')

• How to write a query for the following scenario

  Hi I have a table as follows which have values of column as below

  column1     column2     column3     column4     column5     column6     column7     column8
  10000     10     1     7     15     10     9     0
  10001     11     2     7     19     0     8     1
  10002     12     3     9     8     7     15     0

  I want to find the values 7 and 15 on each line together in one of the columns of 4 to 8.
  
  Here, in case I get a first and third ranks.
  
  (Column1, Column2, Column3) is the primary key for the table
  
  Help, please
  
  Hena

  with data as
  (
  select 10000 as column1,     10 as column2,     1 as column3,     7 as column4,     15 as column5,     10 as column6,     9 as column7,     0 as column8 from dual union all
  select 10001,     11,     2,     7,     19,     0,     8,     1 from dual union all
  select 10002,     12,     3,     9,     8,     7,     15,     0 from dual
  )
  select * from data
  where 7 in (column4, column5, column6, column7, column8)
  and   15 in (column4, column5, column6, column7, column8)
  /
  COLUMN1                COLUMN2                COLUMN3                COLUMN4                COLUMN5                COLUMN6                COLUMN7                COLUMN8
  ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ----------------------
  10000                  10                     1                      7                      15                     10                     9                      0
  10002                  12                     3                      9                      8                      7                      15                     0                      
  

  Edited because requirement changed while displaying the solution

  Published by: Cyn on October 30, 2009 15:27

• How do you avoid the port scan?

  How do you avoid the port scan, or how you define system to block the port scan?

  The Windows Firewall and a router allows to hide all current ports of the analysis. You can test it by using the Shields Up link here - http://www.grc.com/default.htm

  Jim

  Microsoft MVP - moderator of the Forum - consumer security live a care - Live Mesh - Microsoft Security Essentials

• Hypervisor-HyperTerminal: how to write texts in HyperTerminal to a VI in real-time

  I use on my PXI system hypervisor. With 'Specifications to build', I built my RT application in a standalone rtEXE file and set it as start VI for my RT system. It seems to work, since I have received information from my "hypervisor-HyperTerminal" while restarting the RT system.  He writes, "Startup Application: d:\ni-rt\startup\RTMain.rtexe. However, I don't see how my RT application is running or if an error occurs.  Therefore, I think to write texts or my RT application information to the HyperTerminal.

  I wanted to use VISA to the serial port of the HyperTerminal on the side-access system in real time. I used the example LabVIEW "basic series write and Read.vi ' to 'smplserl.llb '.  Under the system in real time, I found only a single resource VISA name, which is "COM1".  Apparently, I can write successfully texts at the port "COM1", because no error was shown in the example VI. But the texts do not appear on the HyperTerminal.

  Do you have an idea, what I did wrong in my attempt, and how I had to do it correctly? Thank you very much.

  Kind regards

  Scarletice

  Hello Scarletice,

  You can use the Debug String VI (http://zone.ni.com/reference/en-XX/help/370622J-01/lvrtvihelp/rt_debug_strings/) RT a message programmatically to the console at the time on a Real - Time Hypervisor system LabVIEW Real-time.

  Please let me know if you need additional help, and have a nice day!

  Best regards

  Casey Weltzin

  Product Manager, LabVIEW Real-time

  National Instruments

• How to write expressions/rules/SQL workflow

  Hi all.
  
  We are recent users of CRM onDemand, we would write a few workflow rules, but can't seem to find all the information on how to do it. The help section is limited in the responses, and some of the issues here are not as specific in what we do.
  
  Someone has any advice on books, websites, etc. on where to find the knowledge we need on how to write workflow rules and the use of SQL and expressions in CRM on Demand?
  
  Thanks in advance!

  For your first case:
  1. you cannot create a workflow in r15 for activity but you can in R16

  Create new to create a workflow
  Name: Auto email send
  registration type: activity
  trigger: when the new record
  rules: put your rules by clicking the fx icon IE this is where you enter the rule by saying that the owner is different from the person who creates the activity or the delegate field is filled (another way of seeing things)
  then save the workflow

  In the section actions
  Choose the action 'create e-mail notifications '.
  In the: Section choose "Registration of the user on Relative" and "owner of the activity.

  Save it. Make sure that the activity and workflow are marked active.

  2. in the second scenario:
  How do you create an account and to automatically fill in the name of the sales of the sale - don't know
  But you can create a fill of opportunity and self with the name of the owner of the account using this validation in the field (you need not the workflow), you can use the FieldValueJoin function.

  Hope this helps - btb there's no book you can go thro the help and you will find some directions