How trivial boot windows server 2012?

Similar Questions

• How to install windows server 2012 and windows 7 or 8 on the same computer

  Hi, I want to install windows 7 or 8 and on the same computer that I want to install windows server 2012 or 2008 I have not decide which one to buy again, and my question is, at the time where there was windows xp and windows me (x 9) for example, you must install first as millennial basic then install xp on another partition in my case I want to know is - it possible to do it without the virtual machine, and if this is the case, which windows must be installed first as the basis...

  Thanks a lot for taking time reading this, looking forward to your reply...

  You will need to ensure that the old version of Windows is installed first of all, in this case (Windows 7), then you can install Windows 8 or Windows Server 2012 after on logical partitions. Please see the following:

  See the following for how to dual boot Windows 7 and Windows 8 (the same principles can also apply to Windows 7 and Windows Server 2012)

  How dual boot Windows Vista/7 and Windows 8

  If you plan to have all three installed, make sure that configure you partitions in advance with ample space for all three.

  See:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

• How to enable Windows Server 2012 R2 Datacenter assessment within a virtual machine supplied by ALM VS

  I can start to connect to the virtual machine. However, I can't activate windows. And running: slmgr.vbs-dli gives result saying timeout.

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How can you apply CALs for Windows Server 2012?

  I have 2 new boxes of Windows Standard Server 2012 and the additional CALs for each. How can I request client access licenses? The only references I've found are from SBS and RDS, or applicable in this case.

  Hi Frank,.

  The question you have posted is related to Windows Server 2012 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope it will be useful.

• How to install Visual Studio 6.0 on Windows Server 2012

  I have a build server that is located on Windows Server 2012.  I need to install Visual Studio 6.0 to build some of our VB and C++ components.  Whenever I run the Setup fails.  Can someone please tell me know how to install VS 6.0 on Windows Server 2012?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to migrate Windows 2003 R2 to windows server 2012

  I am tired of doing the Migration of Windows 2003 R2 to Windows server 2012, but there are some documents are only available in windows net Tech, I installed the migration on Source and destination server tools and its seat, but I don't know how to transfer roles from 2003 to 2012.

  If a know the steps please please let me know.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How to update the model of RDS for Windows Server 2012 collection?

  Hi team,

  I want to know how to update the collection of RDS model (model master sysprep) which is used to create the collection?

  I tried the below way but did not get the update of the collection of virtual machines.

  -Start the image of mater of sysprep

  -install the required components

  -resysprep the image and stop it

  -East went to the RDS Collection and added new virtual machines in collection (removed the old his)

  Once created, I opened a session in the machines, but I don't see the updates (I installed some software in the sysprep image however and no is not there in the virtual machines in the pool)

  Can someone let me know if I need to create a whole collection again or the way I do it is a proper way? If it's a good way what could be the reason why I get the new installed software model sysprep image in virtual machines created in the pool, based on the model?

  How do we actually updated for security and other regular patches updated in virtual machines? In my view, we use the same approach?

  Any suggestions will be appreciated.

  Kind regards

  original title: Windows Server 2012 RDS - model Sysprep update process and collection of creation

  Hi MS Expert 2010,

   

   

  I wish that you post your question in the TechNet Forums as it is addressed to an audience of it professionals.

   

  Check out the link-

   

   

  TechNet Forums

   

  Hope this helps!

   

• How can I add a language bar on taskbar domain member station work by windows server 2012 group policy

  How can I get the language bar on workstation member domain "taskbar of Windows server 2012. GPO

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to resize the disk hard virtual fixed on Windows Server 2012?

  Original title: resizing VHDX fixed disk

  I recently converted a dynamic VHD disk of 95 GB in size (use only 60 GB inside the guest) and now as a fixed disk it's 170 GB in size.

  How can I resize the fixed disk newly created less than 80 GB in size?

  I am running Windows Server 2012.

  Hi Travis,

  Thanks for posting your query on the Microsoft Community.

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=winserver8gen&filter=AllTypes&sort=lastpostdesc

  If you have problems with Windows in the future. Not to contact us.

• How to properly install VMware tools under Windows Server 2012 RC

  After you have installed Windows Server 2012 RC VM works very well.

  After that, I installed the VMware tools-> result-> black flashing screen.

  Boot in F8 mode-> try to remove tolls-> not installed VMware?

  What can I do to retrieve this black flashing screen.

  Not sure at 100%, but I'd say you check/download the vmtools package here: http://packages.vmware.com/tools

  HTH

  Sam

• How can I get Windows Server 2012 Essentials recognize my HARD drive when you turn an external HARD drive in a drive HARD internal storage?

  I recently had a pool of storage space using 3 external drives USB 3.0 in Windows Server 2012 Essentials.  I decided to take the readers out of the enclosure and connected directly to the internal SATA connectors on my motherboard.  When the server was launched upward, these 3 discs now display as disconnected in storage.

  When I do the command 'get-disc' physical in PowerShell, the drives appear as "drives physical 1,2 & 5" and are 2.72 to each. "."  But it also lists disks Seagate Expansion as well, with a status of "communication lost".  These are the same three disks that are now internal.

  Nothing has been deleted or erased, so all the data is still on each individual unit and assume that if I managed to put back them in the external enclosure, would immediately online.  I thought that everything simply moving them to a new HARD disk controller (internal SATA USB) would not cause the pool to drop the readers, they are always connected to the same server.

  Is there a way to get storage space to see and read the 3 internal drives to bring my pool/area back online without losing any data?

  Server experts are found in the forums below.  The forum you are now is for questions to the consumer of Windows, not Windows Server issues:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Question: How can I format Ubuntu 10.10 on my machine for the installation of Windows Server 2012

  My machine is installed with Ubuntu 10.10 and together as a web server for a few months.

  Now, I need to totally remove the Ubuntu and install the large Windows Server 2012 RC.

  Easy steps?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.