Probe an event reminder vi

Similar Questions

• ActiveX - Reg - led event reminder

  Hello

  I'm building a control for a Laser machine which based its controls in the ActiveX control technology. I had a program in c# that works, but I have because I wanted to change the settings and then connect it to another program Labview, I "translate".

  I start with a very simple operation:

  1. 'Start' ActiveX Server
  
  
  2. "load" a design for the laser.
  
  
  3. program of the "end".

  and then based on event (using the reg event reminder):

  If the "QueryStart" laser signal is activated by a switch, then "run" program.

  If the laser "starts", then light a led

  If laser 'ends', then light a led.

  I have problems to light a led by using the ref (LaserStartedLed) VI. I'm using as a model the Labview example: CWKnob to see a number from the button. But in this case, they use the numbers from the button, in my case are just Boolean, and I try to get data from common event.

  Can you help me with other ideas and corrections?

  Thanks in advance,

  
  

• No output message in the reminder of the event reminder register

  Hello world

  Nice day. I've created a diagram that uses the DLL of our client. I have a hard time to create because I am not no matter what background or experience this level of .expertise which involves DLL files. The DLL file is a type of Assembly code .net. The DLL file will be used for sending specific commands (i.e. read the Firmware Version, serial numbers, etc.) using a NFC (Sony S380) Player. It is the only means of communication about the product that is a digital watch. The problem is on the VI Ref callback, which implies a dialog box & a Message string for the property of 'DebugResponseReceived' node, there is no output, but the dialog box Message only gives me a message OK or info that I need to get. If I put a breakpoint to unbundle it by name "e", it gives a message in the property node power & the dialog box. both the Message property Node & dialog box have the same performance. Please see my Code.

  I'd appreciate your help.

  Thank you

  Leo

  A reminder cannot directly return values. You must use the user parameter of event reminder entry register to pass a reference to a queue, the user event or another way to pass data to a primary application. Research on this forum will be examples, for example here is one I posted years ago (note that screenshots are good, but attached the screws aren't; see further on the wire to correct those): http://forums.ni.com/t5/LabVIEW/How-to-interaction-with-Main-VI-from-Net-event-callback/m-p/1064515#...

• Reg while loop event reminder

  Hi, I try to put an event reminder Reg within a while loop where it need to be updated constantly and I have the following error:

  "LabVIEW: (Hex 0x4A5) you can not record the same event on an object several times."

  If I remove the while loop it works fine, but I need this loop. How to solve the problem?

  Thank you

  You register the event with the same VI reminder each time? You don't need to do. Once registered, the VI reminder will trigger on every triggered event.

  You would only need to re - register the event if you want to switch to another reminder VI. To do this, you must first call Unregister for events on the first recorded event.

• Problem of event reminder of the registry with Linkam ActiveX controls

  Hello

  I have a problem in configuration reference VI to interface with Linkam ActiveX control with an event callback function to register. I created a VI strictly typed with re-entrant execution, with all the correct connectors, as shown in the picture below, but LabView complains of a broken wire. The only difference between the input and the output seems to be that the result stands as an asynchronous function, and the entrance wants (synchronous) normal function? I can't find any option to make my VI reference become synchronous. Does anyone have any suggestions as to what to try next? Thank you very much

  Davide

  

  Hello

  Make a right-click on the terminal 'Ref VI' choose 'create the callback VI '.

  Do not try to build it yourself, it never works. :-)

• events reminder and user

  Hello

  I'm developing a user interface, and in my case, I'll have a lot of controls that meet the same events. One approach is to make the array of refs and use events to manage all of them.

  My other idea was to use callbacks instead of user events. But there is unexpected behavior when I register callback for the control of labview. Code inside the user evend and recall is the same but using callback causes the LV to stop responding.

  Is there a fundamental mistake I do recall approach? Could someone please explain that?

  Example as an attachment

  The solution of event user with a table of references would be my preferred solution. It is not recommended by OR to use reminders for the events of the front even if it can be done, because it masks the code (see Help for recall register) of event management.

• Photoshop CC 2014 Extension - CEP event reminder fires several times by event

  Try to do my extensions to watch a bunch of events and it turns out to be a real pain in the *.

  I hope that there is someone here who has a little more experience to play with them.

  I used the sample code from here (Page 43): http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/CC14_Extension_S DK.pdf

  I modified the code just a little. I removed unnecessary things from her. I also added a counter, in an attempt to visualize the problem.

  Every time I pasted the code here, the global variable seems to reproduce. Eeeeh Yes...  the sample code can be found here.

  The problem is:

  I close a single document to raise the event, but for some reason the recall seems to run several times.

  Even better, it does not seem be consistent on this issue. Sometimes she repeats only twice and sometimes he repeats 160 times.

  It seems that whenever the extension Panel is reopened, it comes up with a new number.

  Currently, if I close a document, it seems to trigger the recall 15 times

  Since it's the screenshot, you will have to take my word for it. I closed only a single document, and the code has been 15 times.

  

  I do something wrong by any chance?

  Edit:

  I think I just find out the reason and a way to recreate the issue.

  I tested the opportunity of expansion by closing and opening the Panel, which seems to have caused the problem.

  It seems every time I close and then open the Control Panel, IT... Adds a run more to the stack.

  -Update the chrome Panel does not seem to affect it.

  When I restart photoshop, it resets to zero. So after the first opening of the Panel, the l' evenement event triggers the callback only once.

  -------

  I forgot to mention that the events of the host application work fine without these issues.

  In fact, I tried to use documentAfterActivate before, but that I could find, there is no way kind of filter specific events within the host application events.
  For example, I can't specify something different happen when a new document is opened.

  As much a side note:

  documentAfterActivate has its own side effects due to the way photoshop works.

  It is triggered when you:

  • Create a new document
  • Open a new document
  • Switch to an open document

  This is the part "Switch to a document open" which makes this event listener to trigger when you close a document.

  Because when you close a document, photoshop switches to the previous document which in turn triggers the event listener when he shouldn't, I guess.

  Of course it does not raise the event when you close the last document since none document to fit right in there.

  .. but it's beyond the scope of the original question.

  I had this problem also with flash panels, but I noticed that this has happened only if the Tribunal was persistent, I solve it by cancelling the registration of events when the Panel was closed.

• Unable to get the reminder of the event RMDocument

  Hi all

  I created processes (attached) workbench that intercepts a RMDocument event and prints a message in the log file.

  More I try to capture data from event reminder such as sub, PrincipalName and EventDetail in variables and also print their values in the newspaper.

  When the event happened my process prints the message in the log, as expected, but from the recall of a few reasons remain empty.

  
  Any help will be appreciated,

  Thank you, Yan

  Make sure you are variable are of the INPUT variables.

  Jasmine

• Recall of NewMenuItem() events data

  Hello

  I can't pass a string to the callback by using NewMenuItem();

  I am able to receive the 'Menu Item Id' correctly in the callback function, but 'event reminder data' is not correctly passed to the callback function. I would like to pass a string as "event reminder data."   A little help please?

  Thank you!

  SINNAS

  With the help of pointers can be tricky that their content could be more invalid later when you want to use them.

  In your case, Ini_GetPointerToRawString returns a pointer to an internal memory area that is not permanent: as you can read by using the function:

  The address of the string will be valid until the next call to Ini_GetPointerToString, Ini_GetStringCopy, Ini_GetStringIntoBuffer, Ini_GetPointerToRawString, Ini_GetRawStringCopy, or Ini_GetRawStringIntoBuffer.

  (highlight is mine)

  In other words, if you call the indicated functions your pointer no longer invalid.

  I guess that it is even more true if you call Ini_Dispose when you are finished reading the. INI file.

  What you need to do is to get a copy of the string with Ini_GetRawStringCopy in a static or dynamic string and pass the address of this channel to NewMenuItem.

• Access to the new data in Event Message user callback?

  I use the Simple OI LabVIEW as a template for my user interface for TestStand.

  The sequence sends a Message to the user to the IO to the string array of tests to run.

  But I'm having a lot of difficulties this string data in table for the VI event reminder.

  I don't want to use a global variable and so my method without success so far has been as follows:

  1. use a Refnum at the matrix and pass in the event reminders VI through the cluster Config

  

  2. the "selected Tests" in the entry in the Config cluster event reminders VI is a generic control Refnum

  

  3. the selected Tests (below) is then delivered and passed in the User parameter

  

  4 but how to convert the refnum control Tests that are selected in the original array of strings in the real callback?

  ???????

  Also if there is someone who can suggest a better way to do this then please let me know.

  The line at the bottom is - how to get the most recent data in the event callback function when it is called?

  Thank you very much

  Ronnie

  Ultimately to get this working, I gave up on the string table and changed to a ListBox instead. It was easy then to access the properties of the listbox through the refnum. Probably a major flaw in my understanding of how string refnum work tables.

• Svchost.exe_EventSystem event BEX64 problem

  I have rebuilt entirely twice because of this.  At least this time it seems to occur when you install a Brother printer.  I saw the "related thread", but everything which was said was "network card drivers have been corrupted.  OK, but what I do about it?  The problem occurs because I couldn't run most applications.  Could not run IE or AIM.  After restoring to before the installation of the printer, I managed to capture the error message and get most of the applications that are running again, but I suspect that it's temporary.
  COM + a event system stopped working
  Prob BEX64 event
  Appl svchost.exe_EventSystem
  Version 6.0.6001.18000
  Error module netprofm.dll_unloaded
  The printer site amenities was when it happened this time, but the earlier incident was for a different etiology, I suppose, since the printer was working for a few months.
  I have a HP Pavilion a6700f, Vista 64

  Hello Dakeller99,

  Thank you for posting.  It seems some of your files may have been corrupted or altered.  You can fix this by using system File Checker to analyze and repair the.  I've included the steps below to make a SFC.  Let try this and see if it will fix the problem.

  Please let me know if this helps you.

  The tool File Checker system to determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start
     Collapse this includes this image

     and then type cmd in the box start the search .

  2. Right-click cmd in the programs list and then click run as administrator.
     Collapse this includes this image

     If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. At prompt command, the following line, and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool. Other troubleshooting methods, such as the use of the tool file system, the System Restore tool checker cannot solve the problem. If they do not resolve the problem, and the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start
     Collapse this includes this image

     type system restore in the Search box, and then click System Restore in the programs list.

  Collapse this includes this image

  If you are prompted for an administrator password or a confirmation, type your password or click continue.

• In the System Restore dialog box, click choose a different restore point, and then click Next.
• In the list of restore points, click a restore point created before you started having the problem, and then click Next.
• Click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones want automatic event reminders on my Blackberry.

  Hi all!

  This is my 1 post in the forum. And I have a problem, hope that someone here will sort it.

  I have Blackberry 8820 and I have about 2000 contacts with birthdays as withevents and detailed information.

  But I am unable to get the event reminders, but also anniversaries. Is there a solution to typemanually every year in the calendar. Please give me a device or an application for automatic reminders ofevents or birthdays that I hate the lack of his birthday wish.

  I don't think that WinReminders is the best option that she perceives $25 ony after 180 days.

  The best option for automatic birthday reminders is to use the directory telephone zebrost. This software is free. This book can be used parellely with our native directory and is available on app.world.

  I had recently installed this, because it is free, but also easy to use. After the installation, all the contacts in the native directory comes to zpb. It gives the provisions to store several anniversaries in single contact. In a single contact, I stored my friend's birthday, her husband, her children, their birthday and their office opening date and I automatically gets the reminder on the date on which all of the above event occurs...

  Apart from that, if anyone is a users zpb and himself instructed his put bcard updated with all events such as birthday, anniversary etc. on the zpb user and I have his phone number in my home directory, and then run "UPDATE CONTACT" in SeeYou cards in zpb, I get the bcard update of these people. ". And if that person has already come birthday then I automatically get the reminder on my phone for her birthday and I care about him from this recall.

  Thus zpb gives me reminders of automatic birthday of those people that I have not yet entered in birthdays or other events manually. Secondly, it allows me to enter the multiple events in one contact with each event reminder service a particular contact.

  Finally even if I change my phone model, I'll copy all my contacts from your old phone again. In this case the birthdays and other things are also transferred. So no need to manually type the birthdays again in the new phone. Also, no need to enter birthdays on annual basis. I am grateful to zpb.

• How can we save the event when Photoshop is stopped?

  Hi all!!

  I have to perform actions on the record of events of a document. I had no problem doing the same thing. But, in the course of the different tests save event trigger scenarios, I fell on the situation in which a document without title is open and the user closes Photoshop. At this point, Photoshop prompts the message "do you want to save the document? Regardless of the user's selection ('Yes' / 'No'), the plugin is unable to obtain registration event, perhaps due to the termination of the application. I get the message of kSPInterfaceShutdownSelector directly. Don't stop to save event reminder.

  How can I make sure that my save event callback is executed each time a user saves a document?

  Thank you!

  You must analyze the close event descriptor. Locate the key keySaving

• macOS Sierra - calendar Agent Crash

  I installed macOS Sierra on my MBP 8.3 (17 "end 2011) - 16 GB of RAM. 1 TB SSD.

  After you have identified a problem with a Logitech mouse driver (and delete) I stopped for a few days to attend to other things.

  Restart today, I had a few problems:

  1. the backlight of the screen did not come until after I entered the word password (took a few reboots hard to understand what was going on.  Once I entered the password, backlight restarted and has been authorized since, even after stop and restart.  Weird!

  2. the problem that won't go away, it's with the agent of the calendar.  He has appeared as a couple of notifications - a single event, reminder of a task.  I rejected the two of them, but they came back several times.  The console log shows the following:

  -Beginning of the inserted newspaper-

  Process: CalendarAgent [312]

  Path: gent /System/Library/PrivateFrameworks/CalendarAgent.framework/Executables/CalendarA

  ID: CalendarAgent

  Version: 8.0 (384)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Manager: CalendarAgent [312]

  User ID: 501

  Date/time: 2016-09-27 16:02:35.685 + 1000

  OS version: Mac OS X 10.12 (A 16, 323)

  Report Version: 12

  Anonymous UUID: 050C98F1-BA2C-E406-1823-28FB21ADFCF3

  Time since started awake: 500 seconds

  Integrity of system protection: enabled

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  Reason for termination due to an untrapped exception "NSInvalidArgumentException" app,: '-[CalManagedMigrationGroup isAutoScheduleSupported]: unrecognized selector sent to instance 0x7f87990fb920'

  ending with an exception uncaught of print type

  Abort() called

  -End of the inserted newspaper-

  There a lot more to it and a few dozen of them in today's newspaper.

  Has anyone else had this?

  Any thoughts on how to solve the problem?

  I'm having a similar error - first Mail crashes with the error below and calendar hangs with a similar error.  Details below.  Everything was fine until I updated to Sierra (clean install, not upgrade).

  

• iCalendar is blocked

  Since I bought my MacBook Air last spring, I had problems with calendar. I initially it synchronized with my Google Calendar. But after about a week I started to have a notice that says 'movement calendars to the server account' and everything freezes. I can only get out by stopping the calendar. Any advice?

  Hello Badgerfan33,

  Thank you for being part of the community of Apple!

  Based on what you said, it seems that you may be having problems with the calendar app.  I have several calandars myself and know how it is important to keep them all in sync, but it works correctly.

  The first thing I recommend is to back up everything on the computer. Nothing that I will propose should result in no data loss, but it's always a good idea to have a backup.  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Once you have a good backup, make sure that the computer is running the most recent version of Mac OS X.  The current version is 10.11.6.  You can check which version of the computer is running by clicking the Apple Logo in the upper left corner, then click on about this Mac.  The window that opens should say "OS X El Capitan" with the Version number below.  If it runs something that El Capitan, follow these instructions:

  Update of OS X El Capitan

  Retest the calendar app once OS X is updated to the latest version.  If the message does not appear, then you should be all set.  If the error message is returned, continue with the following steps.

  If the system is already running 10.11.6, and then do the following:

  1. Quit the application calendar.
  2. Go to the Apple Menu in the upper left corner of the screen.  Click on System Preferences > iCloud.  Uncheck the calendars and reminders.
  3. It will ask you "If you want to remove calendars and events reminder of your system. Click Yes. You should have an up-to-date copy of iCloud.
  4. Launch the application calendar. It should show is no longer the error message 'Moving of the calendars on behalf of the server.
  5. To add the iCloud return account to the calendar application, click Calendar > add account > iCloud.  Sign in with your Apple and the password.
  6. It can take a few minutes for the calendar day.

  This should keep the error message appears again.

  See you soon!