Qosmio F60 - ports USB & keys do not work

Similar Questions

• Qosmio F60 - 14Q - FN key does not work with Win 8.1

  Hello

  FN key does not work when I press the FN + F1 keys... F12 after installation win 8.1 instead of win7 which originated with my camera.
  is it possible to make it work even once with 8.1 win and if I need your instructions.

  Can you please tell us what model of laptop do you have?
  Your machine is supported for the own Win8.1 version? Did you check that?

• Qosmio F60 - 11F - FN key does not work

  Hello

  the FN key in my laptop suddenly does not work and so I can't use with combination keys to control my laptop. I tried to make it work with the HWsetup, but there is nothing special for her in the keyboard tab

  I went to the download page for the driver to try reinstalling the driver, but I could not understand what driver should I download

  How can I make the FN key still works?

  My laptop is Qosmio F60 - 11F

  Please check if you can find the option restart Flash Cards in the start menu > all programs > Toshiba > utilities. If you have please use it to restart. If this will not help, try to reinstall Toshiba Value added Package. This package contains the utility of Flash Cards.

  Post comments.

• USB keys do not work in my VISTA PC, but working in the XP computer.

  My PC is only a few months and underwarranty. VISTA is OEM original and authentic. All updates and installed SP2.

  But I have several problems with VISTA.

  One of them is the following:-

  USB keys do not work in this PC. Initially, they are recognized, but as soon as I start the data transfer it stops and does not recognize the keys more. Same USB keys work correctly on other XP computers.

  An external hard drive works perfectly on the same USB port. If the port is fine.

  Hello PG_eu,

  First of all if still under warranty, contact the manufacturer to execute tests for your USB slots. Have you tried to see if other devices work on the USB plug? The manufacturer of your may be able to replace your computer if needed.

  Then, I'd go for the Device Manager to see if you have errors. Go to Device Manager and see if you have a yellow fringe! showing that there are errors with your USB devices. Open the Device Manager in Windows Vista via the management utility of the computer, the Control Panel, or from the command prompt by typing in devmgmt.msc.

  You can go to the different tabs and see if the devices work properly, should be cancelled or update your drivers.
  You can also go into the event viewer and see if you have errors on your hardware devices.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Qosmio F50 - bright/Fucntion keys do not work after update BIOS buttons

  OK... I read a similar post and has FACT EXACTLY what IT SAID TO DO... He solved half of the problem or less... after the update to the new bios that I'd like speed or make my Qosmio energy gave me problem from the first day I installed it...

  The reason why I upgraded to was I thought he could solve my problem of flash memory card. They NEVER APPEAR AFTER REBOOTT... I ALWAYS HAVE RESTART THEM IN THE WINDOWS MENU... I thought that if I do a scheduled task. This would solve the problem. Guess what... It SCREWED my windows calendar place... a mistake self-protection
  This brings me to install the new bios... After you install... He has created ONE MORE PROBLEM, INTOTAL - TWO
  (1) KEYS INFORMED DON'T WORK
  (2) FLASH CARDS DO NOT WORK
  After following the instructions of a thread posted here... He told me to remove the VAP and reinstall... Guess what... it solve the key problem... but MY KEYYYYYY FUNCTION... I restored my pc... He said if your function key is disabled... GUESS WHAAT AGAIN... THE FIRST PROBLEM TO... ILLUMINATED KEYS DO NOT WORK... I later discovered that I can't have both things at the same time according to the instructions... Oh Yes... I forgot to mention;... CARD FLASH showing... shut up has never shown... restoration takes me to the original problem...

  I think down my BIOS version that might solve the problem but can't find it... I don t want to restore because I might install additional software like the game... Assassin s creed... BTW... It works AMAAAZZZINNNN... but the multimedia and function keys keep on bugging me
  I have a Qosmio F50-126 with Vista 32 bit...

  Try:

  Reset the BIOS to its default settings.
  VAP to uninstall and install the latest version from the Toshiba site.

  PS I think you can change the lighting in the BIOS, have you checked this setting?

• Pny 4 GB USB key does not work on my new computer?

  PNY 4 GB USB attached flip key will not work on anything ive tried including the update of drivers on each computer for that material and all the drivers?

  Unfortunately this did not help, the USB is not but the age a year but already had important things, Ive already lost the last 6 months b/c my new windows 7 was a pilot missing and with my boot cd "s out of State, I had to restore to be online for school»

  Unfortunately - when one of these drives (USB thumb drives) goes to the South, more often - it is always toast.  There is no real help to recover the data: that is why everything should be saved.

  You said you tried it on several computers (... on all computers...) so it's probably a Goner.

• Usb keys do not work on HP CM1415FNW

  I have a printer HP CM1415FNW. I need to scan and transfer of files on my usb key. In fact, the printer may read less than 8GB, over her keys cannot read.

  Is there a solution?

  According to this Manual on the walk up to the USB function, the printer does not support USB flash drives, over 2 GB, so it's likely that the 8 GB working.  You could try to do an update of the firmware and see if that gets a job 16 GB, but more probably it won't help.  If you need help with the update of the firmware, I would like to know what operating system using the your and I'll connect you to the latest version.

• Falsh USB key does not work,

  Windows keeps saying disk needs to be formatted, when I click on format, windows can be delivered by saying this format cannot be done. I tried changing the [default] fat to NTFS but always get the same answer.  Have you tried drag / drop images on disk, but nothing works.

  Can someone help please.

  Bigbruv.

  Try another computer. If this does not work on another PC, it broke. teengeek.freehostingcloud.com Microsoft community contributor

• Multiple USB keys do not work on our Satellite A100

  In a conference of 4 of the 5 sticks provided by presenting his colleagues did not. The installation process has started, the message usual flashed in the status line, but then the facilities could not be completed ("Der angegebene Dienst ist kein installierter Dienst", i.e. "the specified service is no installed service' - my translation).

  The problem can be reproduced with a Sony 4 GB Stick, which can be brought to work.

  BIOS update did not help, install the new TI mass storage driver (both from the Toshiba site) did not help.

  Can anyone help? Thanks in advance,
  Martin

  State of the device is visible in Device Manager?
  Do you see yellow exclamation points or some error as the Code 28 error codes?

  If Yes, then I would recommend first installing all the updates of Windows and service pack 2.
  Then remove the USB device from Device Manager. You should remove all the USB controller and hubs from the Device Manager list.
  Reboot the laptop.

  After rebooting again Win XP should recognize the USB ports again deleted and should re-install the drivers.

  In my case it worked!

• Qosmio F60 - Fn key does not work

  Hi all

  My FN key does not work.
  reinstalling the driver as PVAT have no effect...

  Thanks for your help.

  JM

  Hey Buddy,

  Have you reinstalled as Flash Cards Support utility? The FN keys to both tool and value added package.

  Again, you should check the site Web of Toshiba Flash Cards Support utility:
  http://EU.computers.Toshiba-Europe.com > support & downloads

  So uninstall old utility Support Flash Cards and then install the latest version of it.

  Check this box!

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• Qosmio X 300 - 14O - FN keys does not work

  Hello

  I bought a Toshba Qosmio X 300 - 14O to Germany and I installed Windows 7 64-bit. The problem is that my fn key is not working.

  I installed all the drivers I found. I looked upward for this problem on several forums and no solution I found may have solved my problem.
  I hope I can get a solution on your part, because you are the producer and I think you should be able to help me.

  Thank you.

  Hello

  I m queries on your questions because this question has been asked 100 times before ;)
  Have you ever tried the forum search?

  You will find some interesting discussions like these:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58443
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58401
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58344

  As you can just read install package of added value and utility to Support Flash Cards! :)

• After installing new FN and multimedia keys do not work on Qosmio F20

  Hello, my friend buy Qosmio F20 of the Germany, but it comes with Windows Xp with the German language on this subject. I format the hard drive and install Windows Xp Professional SP2. I download all of the drivers who was very available and most of the functions work (like display, sound, touchpad and others), but the multimedia keys and the FN keys do not work (remote work). The other problem is that I can't install the TV tuner.

  With German Windows XP, I try TV tuner but have no SOUND what is the problem? When I try to install the utility software under display appear message that says "Unable to get the information from the BIOS" or something comparable. I have install all the drivers that I found in the Qosmio F20 support page but I have video control with exclamation mark in Device Manager.

  Can you help me?

  Where am I wrong? What should I do?

  First of all he must know that if you are going to install together the Toshiba drivers after installing the OS to do in the right order!
  On the Toshiba driver page, you will find the Installation Instructions. You will need to follow the guide line! It is important to properly work all the functions!

  In addition, you will need to select the right OS. There are two: XP and XP MCE.

  To control buttons Toshiba works correctly, you will need to install the controls.
  But as I said above: follow the instructions in the insulation.

  A few words on the TV tuner:
  As far as I know, you can only use the TV tuner in the country where the laptop was purchased because different PAN and NTSC settings.
  In addition, the TV tuner driver offers TV tuning and recording capabilities using Media Center on your computer. If you have any MCE so I put t know how you want to watch TV.

• Dell Vostro 3550 USB PORT don't DO NOT WORK

  Hi all

  I recently bought the Dell Vostro 3550 (2 days back) and I just realized that only one of the 3 usb ports work.

  1 USB PORT at the BACK (USB 3) does not

  1 LAW of USB PORT (USB 3) does not

  1 works of LEFT USB (USB 2)

  LEFT 1 USB PORT (USB 2.0 / SATA) WORK

  Why not the other. I even updated the BIOS. HELP PLEASE

  Hello

  I recommend you to try the following steps to check the USB ports. First of all I recommend uninstalling and reinstalling concentrators root USB from Device Manager. Please follow the steps below to reinstall the USB root hubs:

  • Click Start, in start search type Device Manager and press ENTER.
  • Expand Bus USB controllers.
  • Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  • Restart the computer and check.

  If the USB ports still do not work, please click the link below and download the USB 3.0 host controller.

  http://Dell.to/PKU06y

  I hope this helps. Just reply to other questions.

• My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports.

  My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?

  Do not use windows update for drivers.

  Update your drivers Lenovo support and see if that helps

  If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work