How writing protected for the system disk?

Similar Questions

• Protection of the system. Responding file or directory is not a reparse point: (0 X 80071126) if please close the property page and try again.

  Three weeks ago, I got a problem of compatibility with nero premium 7 that I installed it, so I had to remove my laptop with great difficulty! I tried restoring the system by removing, and it failed. Whenever I open the system restore, I get a message... "There was an unexpected error in the property page. "The file or directory is not a reparse point: (0 X 80071126) if please close the property page and try again. For the protection of the system disks can not be re-analyzed for the same reason.
  What is the problem and how can I solve it? System repair not even managed to solve!

  Hello
   
  We will first check if the system restore services are set to automatic and started. To do this, follow these steps.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click Windows backup and Volume shadow copy services.
  3. in the Properties window, select the automatic startup type and click Start.
  4. apply the changes.
  5. try to open the system restore and check the result.
   
  If the problem continues, check if the system of protection is disabled. To do this, follow these steps.
  1. Click Start, right-click computer and click Properties.
  2. click on Protection of the system under tasks.
  3. on the System Protection tab, be sure to place a check mark under all available disks to enable system restore or to market.
  4. apply the settings and check the result.
   
  For more information, see this link: http://windows.microsoft.com/en-us/windows-vista/System-Restore-frequently-asked-questions
   
  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change group policy for the system restore will create restore point

  I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.

  I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.

  How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.

  To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks.  Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.

  You can provide any help would be greatly appreciated

  Thank you

  Skyraider 33

  Hello

  You receive an error message when creating a new system for Windows vista restore point?

  Using the Group Policy Editor

  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,

  Follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

• How to create a restore point in the protection of the system in safe mode?

  As topic the question, how to create a restore point in the protection of the system in safe mode?

  Hello

  read a tutorial on the below link for everything you need to know about the system restore

  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  and read this too

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  Hello

  Please follow instructions on the link below to see if the recovery discs are available for your laptop:

  http://support.HP.com/us-en/document/c00810334

  Paul

• I have a mac pro 3.1. How can I transfer the system to a new and bigger drive?

  I have a mac pro 3.1. How can I transfer the system to a new and bigger drive? The old drive is much too small.

  I'm not familiar with your model computer, but there are several ways to do so.  If the computer can accommodate multiple disks, you can install the new drive next to the former.  If she does not accept another disk, you can in these external adapters for about $30, which allow you to attach a bare drive to a computer with USB.  Then, you clone the internal drive to the new. Cloning is a special form of the copy.  It copies all files including startup system files so that your new drive is essentially identical to the first.

  Double clone - http://www.bombich.com/software/ccc.html

  SuperDuper - http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html (shareware)

  IBackup - http://www.grapefruit.ch/iBackup/index.html (free)

  The restore function of disk utility included in directions of OS X. alarm - http://discussions.apple.com/message/8799711#8799711 (a former post but can still work).

  Clone the old drive to the new, then install a new one.

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• instalded new HARD drive, do not recognize the system disk

  I had to replace my hard drive. what I did. implement system sisc restarted.  no system found, just saying., what can I do to make the system disk.

  Of course there is no system found; It's a blank hard drive.

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have Microsoft XP 3 package and some how I lost the ability to restore the system. How can I reinstall the system restore on my computer please?

  I have Microsoft XP Package3 and somehow, I lost the ability to restore the computer to an earlier date. How can I reinstall the system on my computer restore it please?

  Thank you.

  Santosh Mathur

  E-mail address is removed from the privacy *.

  Help us understand what "I lost the ability to restore the system" actually mean for you...

  Are you unable to launch/open the system restore?
  Are you unable to create a new Restore Point manually?
  Your system restore calendar is empty dates?
  You preform a restore and get a message that has failed or nothing has changed?

  If the restore in safe mode will not do, keep reading:

  It would be useful to know a few things about your system:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• I lost my backup for windows xp home disks and now my computer asks me for the startup disk. Is there anywhere I can download the file on a dvd?

  Windows xp starts

  I lost my backup for windows xp home disks and now my computer asks me for the startup disk.  Is there anywhere I can download the file on a dvd?

  Hi DrKathy1950,

  ·         Did you do changes on the computer before the show?

  ·         When she asks the startup disk?

  ·         You get the error message?

  ·         Are you able to boot to the desktop?

  Answer with the information required to help more.

  For reference:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Windows 8.1 - permissions of files - do not have access to the files since the abolishment of all permissions except for the system and my own useraccount.

  I had to put in my computer to the repairshop, so I changed the filepermissions on a large foldertree to all permissions for my own useraccount and all permissions for the SYSTEM account, but deliberately deleted the permissions on this folder to 'Administrator', since the repairshop started getting their own account and I had to make that account a member of the Administrators group.

  Now I'm stuck with a bunch of folders and files (strangely, this didn't happen to * all * files under the folder in question) that I can't read or delete, when logged in as the useraccount with all permissions on the files. I've tried everything, and while I had to click on a dialog box explore asking me to provide administrator access to subfolders in the folder in question, some folders becomes fully accessible (possibly), but some button blown up a "Try again" in explore a dialog box - which has sometimes worked but for some records * didn't * work to resume the TP to my own files.

  I want to know how I can find the full access to these files.

  Talk about the size of a cargojet bug...

  If your own username is a member of the Administrators group, then all you have applied to this group is for you also.

  I would like to start by trying to change only the owner of the files to yourself.  Apply and when finished, close all.  Then go back and change only the permissions that should be easier now that you own on everything.

• On the Protection of the system in Windows 8!

  Hello

  My question is in the protection of the system in Windows 8, I have C and D lit discs! And when you turn on the drive C drive D is also on both at the same time! These drives supposed to be because I was still able to do the restore of the system both off!

  Thank you very much for your help,

  HONEY BEAR 100

  Yes, drive C and drive D are always when the computer is turned on. Drive C is your main drive and D drive is often used by the CD/DVD drive in your computer. The only way to 'turn off' the D drive is by disconnecting the data cable and the power cable on the CD/DVD drive. I have no experience with the system restore.

• Bigfile tablespace for the system tablespace.

  I am trying to create a database with bigfile tablespace for the SYSTEM tablespace as well. Can I use dbca to create and define bigfile tablespace for the SYSTEM tablespace.

  How can I create system with the CREATE DATABASE statement bigfile tablespace?  Can be a help for syntax?

  Even if the normal tablespace is sufficient for the system, I just wanted to check if there is a syntax to create.

  Thank you

  Bigot

  The use of the clause 'SET DEFAULT BIGFILE TABLESPACE' in the CREATE DATABASE command - see creating and configuring an Oracle database

• remote desktop hang at 'Please wait for the system event notification' during logoff

  When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
  This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.

  There is a particular difficulty for this?  I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?

  Thank you

  Hello

  I suggest you to take a look at the answer in this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Sens-could-not-connect-to-the-system-event/4e5a04e9-88f8-4017-9416-2ca67c5ce7c5

  Hope this helps,