HOWTO disable writeback = flashcacheMode

Similar Questions

• HOWTO: Disable persistent DPD on SAA

  Hello...

  I have remote access IPSec VPN configuration (ASA 7.1 on 1 side - customer VPN v 5.0 on the other end) and I have a question where the connection is down regardless if it is traffic sent through the tunnel or not!

  The tunnel remains during different periods of time, but in the end it dropps!

  I gather the following ASA error message:

  ASA-EVOTO #.

  PIX % | ASA-3-713123: IKE has lost contact with the remote peer, removal of connection (type keepalive: DPD)

  This message indicates that the remote peer IKE did not meet the persistent in the window of time, so the connection to the peer IKE was stopped.

  The message contains the mechanism used.

  So, is there a way to disable persistent between the VPN Client and the plateau of the ASA?

  What else could solve this problem

  Thank you very much

  Hello

  'disable isakmp keepalive' in a Tunnel Group Configuration.

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/i3_72.html#wp1732140

  Kind regards

  Arul

  * Rate pls if it helps *.

• Pop - up to remove after pressing rejects three times (howto disable)

  Whenever I reject 3 pictures in a row (by pressing X), I get a boring pop asking me to "remove selected photo form the disc or only from Lightroom". The options are remove the disc / cancel / remove

  

  I have no idea why this pop-up shows after only three rejected images every time? It's annoying because I have to press on enter it each time.
  Someone has any idea how to disable this question?

  This topic can be closed. The problem had nothing to do with Lightroom. The problem occurred because I had a shortcut in TextExpander that triggered when you press xxx. It is strange that the x - are are treated as if they were text in lightroom and so activatie TextExpander. After you delete the shortcut in TextExpander, the problem is resolved.

• Solved: Howto disable Rule DRS

  Hello

  I searched and searched, but couldn't find a solution.

  How can I disable a Rule existing DRS with perl?

  Here's where I start but do not get further :-(

  my $cluster = "mycluster."

  # The connection to the Web of VMware Infrastructure service

  Vim::login (service_url = > $service_url, user_name = > $username, password = > $password);

  My $cluster_view = Vim::find_entity_view (view_type = > 'ClusterComputeResource', filter = > {name = > $cluster});

  my $rules = $cluster_view - > configurationEx-> rule;

  foreach (type {$a-> name cmp $b-> name} @$rules) {}

  My $rule = $_;

  #rule active = 1, disabled = 0

  $rule-> active = > 0;

  My $rule_status = $rule - > enabled;

  My $rule_name = $rule-> name;

  Print "$rule_name status: $rule_status \n";

  }

  Kind regards

  Rainer

  My part - in ClusterConfigSpecExtype, the property is named rulesSpec, not ruleSpec.

  #! / usr/bin/perl

  use strict;

  use warnings;

  use VMware::VIRuntime;

  My % opts =)

  cluster-online {}

  => Type ": s"

  necessary,-online 1

  },

  );

  OPTS::add_options (%OPTS);

  OPTS::parse();

  OPTS::Validate();

  Util::Connect();

  My $cluster_view = Vim::find_entity_view)

  view_type-online "ClusterComputeResource."

  filter => {name-online Opts: get_option ('cluster')}

  );

  my $rules is $cluster_view-> {'configurationEx'} {'rule'};.

  My @rule_specs = ();

  foreach my {$rule (type {$a-> name cmp $b-> name} @$rules)}

  My $is_enabled is $rule-> active;.

  My $rule_name = $rule-> name;

  Print "$rule_name $is_enabled \n";

  My $rule_change = new ClusterRuleSpec)

  operation => ArrayUpdateOperation-> new ('edit'),

  Info-Online $rule,

  );

  # Enable or disable the rule

  $rule_change-> {'info'} {'enabled'} = 0;

  push @rule_specs, $rule_change;

  }

  My $cluster_spec = new ClusterConfigSpecEx)

  rulesSpec-online \@rule_specs,

  );

  # Must obtain and check the status of the task, we're going to be lazy and use the version no-Task

  $cluster_view-> ReconfigureComputeResource)

  Spec => $cluster_spec.

  change-online 'true '.

  );

• HOWTO disable a button within the APEX?

  This may seem like APEX for Dummies, but I currently have a problem with presenting a plain old HTML in the APEX in mode button disabled (not clickable). In HTML, this is no problem when you use 'disabled', but in the APEX, it does not work because the apex"disabled =" off "disabled".
  
  1. How can I display the button in a status of "disabled" in the APEX?
  
  2. How can I dynamically determine whether the button should be displayed as disabled or not?
  
  Any help is appreciated.

  Hello

  I did something very similar recently (and to be honest, the methodology is very close to what Riedelme suggested already):

  (1) create an item hidden in the area containing the keys to be turned off (make sure it's AFTER the buttons you want to disable)
  (2) in the message text of the element element field, enter Javascript to disable the button (s) - for example:
  
  (3) set the conditional display of this point on the result of a PL/SQL function returns BOOLEAN - in this case, it would be your authorization feature, or whatever. Or you can use regardless of the conditional formula meets your configuration.

  In this way, every time this hidden item is loaded i.e. authorization fails for example, the javascript code snippet will be loaded and executed, and your buttons will be disabled!

  Hope that makes sense!

  Chris

• writeback corrupts my records

  Sometimes, I get a message saying that the writeback has failed for a drive letter. Then, the reader gets corrupted. He did fatally with a usb flash drive and a virtual hard disk. Luckily, nothing serious happened to my c: drive. How can I completely disable writeback for all readers?

  There is no scale setting to disable the system write cache.  Try this:

  In the VMware Server Management console: turn off the Virtual Machine, then go to settings, select hard drive, go to advanced, uncheck write caching.
  Restart the Virtual Machine, take advantage of the faster hard disk access times!

• Volumes over 2 TB

  I have the volume on our EqualLogic PS4000 that holds about 20 vmdk for ESXi enviornment.  I want to increase the capacity of this volume of 2.5 to support future growth.

  When I do this in the Group Management Console, I get a warning that says that some operating systems do not support volumes over 2 TB.  The volume contains a combination of Ubuntu and Windows servers and none of the drives are more than 100 GB individually, and they all VMDK located just on the volume.

  When I increase the size of the volume, it should not affect the ability of servers to see the volume at right?  Which applies only when I was going to put a system of files directly on the volume (and it is longer than 2 TB)?

  Thanks in advance.

  Hello

  What is important is the operating system that is connecting to the volume.  You run ESXi v5 and v5 VMFS file system?   Older versions of ESX and VMFS v3 have a 2 047 GB limit.

  However, rather than keep the extension of a volume, I would suggest creating a new volume.

  Mulitple volumes give better performance.   Each volume has a limit negotiated on the number of IOs in circulation that can be treated.  More medium-sized volumes most outstanding IOs can be processed.  In addition, all the virtual machines on a single volume to run into this limit.   In addition, sometimes a node ESX must exclusively a reserve volume.  Meanwhile, only that node can access the volume.  With more volume, IO would continue to be managed on a non-reserved volumes.

  Here are a few quick recommended practices for ESX and EQL as well.

  Disabling delayed ACK, large receive offload, ensuring you that virtual machines with multiple VMDK/RDM do not share a single virtual SCSI controller.  Each virtual machine can have up to four SCSI controllers.

  Solution title HOWTO: disable large receive unloading (LRO) in ESX v4/v5

  Details of the solution in VMware, the following command queries the current value of LRO.

  # esxcfg - advcfg - g/Net/TcpipDefLROEnabled

  To set to zero (disabled) LRO value:

  # esxcfg - advcfg - s 0/Net/TcpipDefLROEnabled

  NOTE: a server restart is required.

  Here's how to disable delayed ACK

  KB.VMware.com/.../Search.do

  Some links on virtual SCSI controllers adding

  KB.VMware.com/.../Search.do

  KB.VMware.com/.../Search.do

  Kind regards

  Don

• PS4100X - Set Initial configuration (vSphere 5)

  Hi all

  We just bought a PS4100X with 12 x 600 GB 10 K SAS (7.2 to RAW)

  This unit is due to replace our existing Powervault MD3000I device is used in a Vmware ESX environment.

  What RAID / Datastore ESX configuration would people recommend.

  Currnently, we have implemented for example what follows.

  2 x Raid 10 groups of drives with 1 TB of virtual disks on each.

  Records 1 to 2 are then presented to the ESX and used by 2 data warehouses.

  Congratulations in advance.

  I suggest you cut up TB volumes smaller. That is 600GB (depending on the size and the number of virtual machines on each datastore) each volume has a queue queue defined, usually 32.   More medium-sized volumes most exceptional IOs may be running.   Also there are times when ESX must block (reserve) a volume, so that reserved no other node may make the e/s to this volume.  So more volumes reduces the question and other volumes have current IOs.

  Here are some best practices

  People with DISABILITIES ACK delayed 1.)

  2.) large receive Offload DISABLED

  3.) make sure, they use VMware Round Robin (with IOs through changed to 3), or preferably MEM 1.1.0.

  (4.) if they have multiple needs of VMDK (or ROW) in their VM, each of them (up to 4) its own virtual SCSI adapter.

  5.) updated latest version of ESX, to get the latest NIC drivers.

  6.) too little volumes for the number of virtual machines that they have.

  This is a material source for the delayed acknowledgement

  KB.VMware.com/.../Search.do

  virtualgeek.typepad.com/.../a-Multivendor-post-on-using-iSCSI-with-VMware-vSphere.html

  How to disable LRO

  Solution title HOWTO: disable large receive unloading (LRO) in ESX v4/v5

  Details of the solution in VMware, the following command queries the current value of LRO.

  # esxcfg - advcfg - g/Net/TcpipDefLROEnabled

  To set to zero (disabled) LRO value:

  # esxcfg - advcfg - s 0/Net/TcpipDefLROEnabled

  NOTE: a server restart is required.

  Info on LRO change in the feedback network.

  docwiki.cisco.com/.../Disable_LRO

  How to add virtual SCSI adapter:

  KB.VMware.com/.../Search.do

• Possible bug APEX 4.0?

  As a result of this thread Howto disable a button in the APEX? I disabled a button in my apex 3.2 application and it worked.
  
  Basically, in the Post of a hidden element element text field, I entered Javascript to disable a button.
  
  
  But when I exported that app at apex4.0, I do not see where is the message element hidden item text field. But the button still works.
  
  Where is the javascript code that I added to the text of item Post of the hidden element field.
  
  
  Thank you
  
  Published by: user5406804 on April 15, 2011 18:44

  If you change (you don't have to save) the element (tell textfeild) type, you should see the indicated area of the element.

  Apex 4, features that are not relevant for each type of item is hidden in the page change using Javascript and appear when you change to something that uses these features.

• HOWTO enable disable items of the menu bar in actionscript

  Hello
  My problem is I want to toggle buttons in a menu bar according to the loaded page.
  So what I did when the user clicks on the menu bar, it triggers a function. Inside that function it will become a check on what page is at the front. According to this page I put on and outside menuitems.
  It's the idea that I had, so now my problem.
  First of all, I try to create a simple solution as my code under.
  ----------------------------------------------------------------------------------------- ------------
  

  I suggest you to change things around. See if the following works for you. The clickHandler() method has the syntax you're looking for.

  TS

• Whenever I get up for a minute, my computer turns off is there a way to disable the functions "sleep" and "hibernate"?

  My computer used to stay... since I work with clients, my computer work is often interrupted. He is turns off if I stop for a moment and it's annoying to keep back on each time. The function 'Start'-j' looked where you shut down your computer and noticed "Sleep" - who says turn to turn off and saves the info... and "Hibernate" - which goes out and saves the info... but I don't remember always those who are there. Is there a way to disable this option, so my computer stays on?

  It is not related to firefox, but I think I can help you:

  1. Click on the stack (if you are connected, there a picture of a plug) in your taskbar (near the clock) windows
  2. Click more power Options
  3. Otherwise, go to control panel-> power options
  4. Click change when the computer sleeps
  5. Adjust the settings so that your computer does not sleep for a long period of time.

  See also: http://www.howtogeek.com/howto/windows-vista/disable-power-management-on-windows-vista/

• Satellite M100 - is a disabled firewire port saves battery power?

  Hey everybody

  I'm not so IEEE...
  If I disable firewire in Device Manager it will stop it and it will help save the battery?

  Hi Dmitrij

  I doubt that disabled firewire port will help to save the battery.
  If you want to save battery power, you should check the options and settings of Toshiba Power Saver.

  Check the HowTO document
  + How to configure my computer for optimal use of battery? +
  You can find it in the Forum s box HowTo.

  If you are using Vista, then I recommend that you check the Vista power settings.
  More details you will find in "HowTo" doc:
  + How to manage Windows Vista power management features? +

  See you soon

• How to disable the Windows 7 startup splash screen

  After that the PC starts the "sign-in" screen comes up. Click and go to the desktop and the program of your choice. If reading or not active on the keyboard or the mouse in about 15 seconds the start screen comes back. All view timers are defined for 45 min.

  A help site says to disable all elements of microsoft - it does not help.

  Suggestions?

  Open screen saver settings by clicking on the button start , by clicking on Control Panel, appearance and personalization, on personalization, and then clicking screen saver.

  • To disable all screensavers, under screen saver, click (none) in the drop-down list, and then click OK.

    If the problem persists, try the information available on the following link:

    http://www.howtogeek.com/HOWTO/9090/learning-Windows-7-manage-power-settings/

• HOWTO fix Labview 2010 delays

  My Labview 2010 causing huge delays ~ 30-40 years compiling and when using the restore function.

  It blocks the (useless) pc for its time.

  I tried several times now, but the work of development with this break is not possible.

  System: MS XP32, Athlon 64 3800 + with 2 GB of RAM is not recent, but clearly within the min. requirements: Pentium 4 and 1 GB

  The app is first written as LV 6.4/8.0 and use very less stuff express vi.

  HOWTO solve the problems of delay with LV coming 2010?

  1. do I need to rewrite my whole program express screws...

  2. can I disable certain features to reach LV 8.0 performance...

  3 do I need a faster cpu and more RAM...

  ((4 can I I restore this program to OR because of) a lack of compatibility and b) minimum requirements of evil

  BTW... can Labview be completely uninstalled at all...?

  Sorry to ask a little aggressive but this "program OR" cost me a couple of days now for nothing

  Tips in particular to Question 2 would be much appreciated...

  read it twice, I discovered a very interesting aspect now your answer Putnam... Thank you

  I think this indicates that the solution...

  sound in this line here...

  > Currently using LV 6.1 - LabVIEW 2009, RT8.5

  I'll go and reinstall 8.0 and available banks of LV and recommend seriously

  for all LV users do not update to LV 2010.

• My Security Center service is disabled and cannot be restarted.

  My Security Center service is disabled and cannot be restarted

  also windows defender' cannot be found.

  [Moved from Community Participation]

  Hello

  What version of Windows are you using?

  What is the exact message that is shown when you click the 'Activate now' button to the center of the Action?

  Make sure the service is started

  Start > type services.msc

  Double-click the "Security Center" service

  Set it to automatic (delayed start) and click Start.

  What antivirus do you use?

  If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  Microsoft Security Essentials has its own version of Windows Eefender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/