HP 110-194 desktop PC: updates pilot Windows 10: is a 8.1 update good enough?

Similar Questions

• HP 110-352na desktop PC: update my graphics card

  Im trying to buy a new graphics card which is ASUS STRIX R9 380 OC Gaming graphics card for this computer: HP 110-352na desktop PC. Right now I use AMD Radeon HD 8400 / R3 series. Well, I want to know if the Asus graphics card fits, and if it's working properly.

  Greetings,

  Your PC comes with a external power supply 65 watt portable. I don't think it's possible to switch to an internal power supply because of the limitations of the chassis.

  THA Asus only graphics card requires up to 225 watts just to power the card.

  Jay

• HP 110-355nl desktop PC: the card wireless on HP 110-355nl desktop PC

  Hello

  I would like to connect my HP 110-355nl desktop PC to the Internet via a wireless network. It seems that the PC has no wireless inside card and I can't find where I could plug a wireless card on the motherboard.

  Can anyone help please? Can you please suggest me a wireless card I could buy for my PC?

  Thank you very much!

  fabioG

  You are the very welcome.

  I used to think that too, but this particular model USB adapter is as good as any PCI or PCIe x 1 card internal wireless I've ever used.

  It even works with Windows 10.

  Dual band means that if you have a double router N wireless broadband, it can connect on the 5.0 GHz and 2.4 GHz bands.

  I just took a glance at the motherboard on your PC support page, and there is no place that I see do any update at all, except to increase memory.

• Connect my Palm TX for Palm desktop on my laptop Windows 8

  I have successfully loaded Palm Desktop on my laptop Windows 8 and given advice on your support page, I'm trying to link my Palm TX using Bluetooth.

  The laptop recognizes the TX as a hand held PC and ask me to enter a password but the TX does not recognize laptop.

  (a) how can I get the TX to recognize the laptop?

  (b) what is the relevant password?

  Thank you

  Hello cardinalw!

  You must follow the instructions in the thread sticky at the top of this section exactly!

  You can't run just one of the files to install the update.

  Good luck!  You'll be HotSync in no time!

  WyreNut

• XP Remote Desktop cannot connect to Windows 7: error 0xc00002fd

  I use Remote Desktop 6.1.7600 on Windows XP sp3 on two different computers and I am trying to connect to a Windows 7 machine on the same domain of one of them.  On the first machine to XP, I have several times a 0xC00002fd error "an authentication error has occurred" when you try to connect to the Windows 7 computer.  On the second XP machine I'm simply asked to password and user id several times.  On both XP machines I have activated CredSSP according to MS kb article 951608.  I'm an admin on the Windows 7 machine and uses my own credentials to connect.  This connection has worked in the past at least one of these XP machines and now all of a sudden it does not, or only intermittently.  Dr Mac OSX version seems to work perfectly.  This makes me wonder if there was an update on the XP side that makes CredSSP work correctly?

  Hi Bruce,.

  The question you have posted is related to the connection via the remote desktop of XP to Windows 7 computer on a domain network and would be better suited to the TechNet community. Please see the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 110-243wb desktop PC: can I upgrade the ram and memory of my HP 110-243wb desktop PC?

  Can I upgrade the ram and memory of this HP 110-243wb desktop PC? What suggest you and you thank in advance.

  What did you find?  Was it a 8 GB module?  Two modules of 8 GB is the MAXIMUM.

  Yes, this is why I suggested the part numbers.  You have to match pairs.

• Can not unlock a desktop session remotely on Windows R2 2012

  If I remote desktop to a Server Windows Server R2 2012 and then Ctrl + Alt + end, and then choose lock to lock the RD session, I don't see a way to unlock the session.  I try Ctrl + Alt + end and it does nothing.  I don't see any buttons and have tried several shortcuts (Windows key +) and had no luck.  I made (mstsc.exe) remote desktop, I have clicked on the Options show, went to the tab local resources and ensured that keyboard is set to Windows apply combinations of keys on the remote computer.  When I try to Ctrl + Alt + Delete, my office shows me the menu (to lock, etc.).  The remote session does not receive this key combination.   My desktop is Windows 7 Enterprise.

  Is there a key combination I'm missing?  or is there a setting on the server that is required/missing?  Or would a group policy to ask this question?

  Note If I have a remote desktop to a Windows 2008 R2 server, I can easily unlock the screen. Furthermore, we use RSA with a connection token.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Remote Desktop connection between my Windows 7 and a new friends Windows 8.1

  Hello. My friend just got his first computer and is completely lost. She has absolutely no experience with a computer and a computerphobe of full tilt. We are 400 miles away and tried to help him by phone with little luck. To make things worse, I think that someone in which she rose to set his computer did not understand 8.1 either. I've been computing for a long time and have studied 8.1 and feel comfortable with it. But I never configured before remote connection and am unsure of certain things.

  First the operating environment:

  My computer: Inspiron 560 s under Windows 7 Home Premium.

  I'm on a home using Netgear network. I'm not using a wifi connection.

  His new computer: desktop HP Pavilion Slimline model 300-413 running Windows 8.1.

  I'm not sure of its network connections.

  Note: I use this to 8.1 as a guide (the link opens the guide for Windows 7...? But I use the guide for 8.1)... http://Windows.Microsoft.com/en-us/Windows/Remote-Desktop-connection-FAQ#1TC=Windows-8

  I think I can happen by steps 1.a. to 1.e. without any difficulty.

  Now the questions:

  1. in step 1.e.1. regarding 'Locations', I don't know what are the options it will present with or should I tell him to choose?

  2. to step 2.b. on the 'system', I know that she must see 'Computer name' and 'Working group', but I'm not sure what she's going to see in which area '? This does not appear on my version of Windows 7.

  3. If I can talk to him through this, she will be able to watch what I'm doing on his monitor?

  Please keep in mind that it is a perfect beginner so no instructions to its end should be as simple as possible, and I am new to 8.1 and uncertain as to what exactly she will see during the installation.

  She told me yesterday that she is so frustrated that she's almost ready to throw it all in the street and forget it. So any help and advice would be greatly appreciated. Thank you.

  Mark

  We can help you help questions.  Frankly McAafee exhale is a good thing IMHO.  I would never use it for multiple reasons

  It can remove using this program to uninstall McAfee and use Microsoft Security essentials

  McAffe often contributes to BSOD

  
  

  I remove and replace it with Microsoft Security Essentials

  
  

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/

• How can I download Google Chrome and IE on desktop in new Dell/Windows 8

  I want to download above on the desktop, but not in 'Windows 8 Desktop mode'.  I would like to use, as much as possible, like Windows 7, for example. Thank you in advance to advise me.

  Just click the tile Office to launch the desktop computer, start IE and download Google Chrome. Except for no Start Menu (which replace the screen and charms), the office works exactly as before.

• Cannot download the 6.2 Palm Desktop and HotSync Manager (Windows)

  Cannot download the 6.2 Palm Desktop and HotSync Manager (Windows) for Tungsten E2.

  I get the error message: "unable to 1607 to installInstallShield Scripting runtime.

  Is there a solution?

  Thank you.

  Found this on the Palm.com support plate:

  http://KB.Palm.com/wps/portal/KB/common/article/20727_en.html

  WyreNut

• game error: 2 zoo tycoon does not work on my windows vita he says I do not have enough system memory

  Tycoon Zoo 2 does not work on my windows vita it says I do not have enough system memory and I have a lot to run the game, I can't understand what is wrong

  ---------------

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• Windows 7 Firewall - is it good enough?

  Hello

  I was wondering if the Windows Firewall is good enough, or if I need a third-party option.
  With Zonealarm, for example, when a program tries to connect to the internet for the first time, he asks me if I want to allow or deny the connection.

  I saw not the Windows Firewall to do this. It's probably Rocky? And you do not want to be asked if a program requesting internet access should be blocked? Or the Windows Firewall is automatically knows which programs are "Ok"? It is said that you can have it warn you when it blocks something, but when it DOESN'T block outbound connections?

  While I tend to think, I still prefer a third-party firewall that will enlighten me when something tries to access a port and asking permission. Brian Tillman [MVP-Outlook]

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)