Connect my Palm TX for Palm desktop on my laptop Windows 8

Similar Questions

• Cannot download the 6.2 Palm Desktop and HotSync Manager (Windows)

  Cannot download the 6.2 Palm Desktop and HotSync Manager (Windows) for Tungsten E2.

  I get the error message: "unable to 1607 to installInstallShield Scripting runtime.

  Is there a solution?

  Thank you.

  Found this on the Palm.com support plate:

  http://KB.Palm.com/wps/portal/KB/common/article/20727_en.html

  WyreNut

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• Palm Desktop 6.2.2 Windows 8 missing modules after the update to version 4.1.4

  After installing Palm Desktop 6.2.2 version 4.1.4 on my laptop to Windows 8 for use with my Palm Tungsten E2, I now only 4 modules... Fees, Note Pad, media and install. Where have calendar, addresses, etc., disappear to?

  Version 7.0.2 HotSync Manager also offers, USB, network and series, but NOT the Bluetooth in connection settings. I use an IVT BlueSoleil Bluetooth adapter and their driver/software version 8.0.395.0, which works very well with anything else.

  GoneFishin6, I suggest you clean uninstall/reinstall Palm Desktop.

  Your question is the first I've heard of.  Others report success with Win8.

  These instructions are for Vista, but should work for Win8.

  You first need to you a copy of your data to have just in case something happens. You can find your data files by clicking on start-> Documents-> Palm OS Desktop. Highlight your Palm Desktop user name and right click and copy. Then go to the desktop of your PC, click on a blank spot block and select.
  
  If this is the first time, you install Palm desktop and encounter a problem, go to the previous step. If you are not concerned about your data at this stage, go to the next step.
  
  Now, you want to uninstall Palm Desktop and remove anything that has to do with Palm Desktop on your computer. Go to the following locations on the PC and delete the folders listed below. [C:\Program Files\Palm or C:\Users\[Vista Palm connection name] \appdata\local\virtualstore\Program Files\Palm or PalmOne C:\Users\[Vista Login Name] \appdata * note you may need to show hidden folders to join appdata. To do than to go into your control panel and open folder options. Go to tab and uncheck hide hidden files.
  
  When you use Palm desktop 6.2, look in my documents or documents and delete the folder Office of PalmOS. It is the location of the PD 6.2 data files.
  
  Once this is done, you will need to remove certain keys in the registry of your PC operating system.
  
  Word of warning, go here and removing the wrong thing can cause your PC to start, crashing and deletion of programs and data. If you feel that you are not sure of yourself, see if you have a friend who can help you or a PC technician that you can pay to help you. This procedure will show them everything they need to remove. To make sure that we have a good copy of the current registry, we make a backup of the registry.
  
  Go to start on your PC in the search box type "regedit.exe" without the quotes.
  
  Point peak COMPUTER, go to file-> Export. Should appear with a save as box. Current place of residence is fine, must be within My Documents, or save to a location that you will remember. In the name of the file in low type "backup [todaysdate]" i.e. backup07072008. Then, the most difficult part.
  
  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. You will be asked, you of course. Say Yes. Do the same for all the keys below.
  
  If you make a mistake, stop what you are doing. And call a PC technician. BUT do not turn off your computer.
  
  The reg keys are as follows (Note: some of the theses reg keys will not be here, but if they remove them)
  
  * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer * Robotics\Pilot Desktop HKEY_CURRENT_USER\Software\U.S. * HKEY_CURRENT_USER\Software\Palm * HKEY_CURRENT_USER\Software\Palm, Inc. * HKEY_CURRENT_USER\Software\PalmDesktopAutorun * HKEY_CURRENT_USER\Software\palmOne * HKEY_CURRENT_USER\Software\PalmSource * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
  
  Then, restart your computer.
  
  Then, reinstall your Palm desktop from the CD and do a hotsync. If request you a user name, enter the name that is on your device in the upper right of the screen to hotsync.

• Help w / lost notebooks (Win7, Palm Desktop 6.22) using WIndows player

  Hello

  Just to start with a new company (I copied my files Palm OS Desktop of old computer system) and after installing Palm Desktop 6.2.2 by Access.  I copied on my copy of Palm OS Desktop File System info) and I could see my addresses however, my memo were there intermittently.  However sometimes I can launch Palm Desktop and my memos are present and othertimes they lack UGH.

  I copied my files and still nothing.  I reinstalled Palm Desktop and now the memos are still missing.

  I don't have the installation path for the instance of WIndows 7 is c:\pgm files x86\Palm and also noted information has been written for C:\users\me\OneDrive\MyDesktop\Palm OS Desktop

  File names and sizes are:

  Memopad.dat = 2836 KB

  notebook (without extension but watch to be associated w / MS Access) = 100KB

  Memopad.mdb.bak = 100 KB

  Memopad.mdb = 100 KB

  Uiprefs.dat = 1 KB

  After discovering the OneDrive info, I thought I could have the system shutdown event a replication and corrupt it however, I played a bit to rename the memopad.dat to .old and still nothing seems to me my pads.   I copied my files Palm OS Desktop system in the Office of OS C:\users\me\OneDrive\MyDesktop\Palm to see if that would help and it did not.

  I have data in Notepad format mid-90... really need my data!

  Is there another tool that I can use to open these categories memopad and pads?

  Really need help,

  Keith

  The installation directory is strange - I agree that could be the source of the problem.

  On the laptop ready Win8.1, I have the HP (for my participation in the Forums), the directory is:

  C:\Users\ < I > \Documents\PalmOS Desktop

  I backup the user data, uninstall Palm Desktop, and then reinstall and pay attention to where she has choices.

  A clean uninstallation may be necessary:

  These instructions are for Vista, but should work for Win7.
  
  You first need to you a copy of your data to have just in case something happens. You can find your data files by clicking on start-> Documents-> Palm OS Desktop. Highlight your Palm Desktop user name and right click and copy. Then go to the desktop of your PC, click on a blank spot block and select.
  
  If this is the first time, you install Palm desktop and encounter a problem, go to the previous step. If you are not concerned about your data at this stage, go to the next step.
  
  Now, you want to uninstall Palm Desktop and remove anything that has to do with Palm Desktop on your computer. Go to the following locations on the PC and delete the folders listed below. [C:\Program Files\Palm or C:\Users\[Vista Palm connection name] \appdata\local\virtualstore\Program Files\Palm or PalmOne C:\Users\[Vista Login Name] \appdata * note you may need to show hidden folders to join appdata. To do than to go into your control panel and open folder options. Go to tab and uncheck hide hidden files.
  
  When you use Palm desktop 6.2, look in my documents or documents and delete the folder Office of PalmOS. It is the location of the PD 6.2 data files.
  
  Once this is done, you will need to remove certain keys in the registry of your PC operating system.
  
  Word of warning, go here and removing the wrong thing can cause your PC to start, crashing and deletion of programs and data. If you feel that you are not sure of yourself, see if you have a friend who can help you or a PC technician that you can pay to help you. This procedure will show them everything they need to remove. To make sure that we have a good copy of the current registry, we make a backup of the registry.
  
  Go to start on your PC in the search box type "regedit.exe" without the quotes.
  
  Point peak COMPUTER, go to file-> Export. Should appear with a save as box. Current place of residence is fine, must be within My Documents, or save to a location that you will remember. In the name of the file in low type "backup [todaysdate]" i.e. backup07072008. Then, the most difficult part.
  
  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. You will be asked, you of course. Say Yes. Do the same for all the keys below.
  
  If you make a mistake, stop what you are doing. And call a PC technician. BUT do not turn off your computer.
  
  The reg keys are as follows (Note: some of the theses reg keys will not be here, but if they remove them)
  
  * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer * Robotics\Pilot Desktop HKEY_CURRENT_USER\Software\U.S. * HKEY_CURRENT_USER\Software\Palm * HKEY_CURRENT_USER\Software\Palm, Inc. * HKEY_CURRENT_USER\Software\PalmDesktopAutorun * HKEY_CURRENT_USER\Software\palmOne * HKEY_CURRENT_USER\Software\PalmSource * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
  
  Then, restart your computer.
  
  Then, reinstall your Palm desktop and do a hotsync. If request you a user name, enter the name that is on your device in the upper right of the screen to hotsync.

  WyreNut

• Palm Desktop 4.2: Palm Desktop 4.2 on Windows 32-bit 10

  This isn't a question, some information for fanatical Palm users who might be interested.

  Because I have some old software I want to continue to use, I installed the 32-bit version of Windows 10 on my HP Pavilion 1d21dx g6.

  I used to synchronize my Palm Centro on a machine to Vista 32 bit running Palm Desktop 6.2. Because some very useful features (such as the birthday in the calendar reminders) disappeared in this version, after setting up 10 32-bit Windows, I decided to try to use Palm Desktop 4.2, the version supplied with my Centro. I am happy to report that I have installed the software, did a HotSync, and everything went very well [WELL, i thought THAT this was the CASE - SEE below]. Now I have all my stuff on the phone and on the machine Windows 10, complete with birthday in the calendar reminders.

  The only problem that I had was settting place pipes HotSync for some Palm OS with counterparts of office applications, but in any case, I was able to get the pipes installed by the application of counterpart temporarily running in Windows XP compatibility mode. Once the pipes are put in place, it seem to not need to run anything in compatibility, or administrator mode [WRONG - SEE below].

  I have not heard a lot about the 32-bit version of Windows 10, but I like it. I found that it is very fast, and I still have to find an old Windows application that she will not be executed.

  I found a solution that worked for me. I realized that something on my setup of Palm caused my Palm user directory switch between C:\Program Files\Palm\Username and C:\Users\Username\AppData\Local\VirtualStore\Program Files\Palm\Username, leading to duplicate reports, missing documents and the General problems of HotSync. I do not know what exactly triggers the switch every time (I don't think it was just the question of admin rights as I at first suspected), but I think it had to do with some of my Palm to be older than other applications. In other words, some were apparently designed or implemented to date with new versions of Windows in mind, while others were not, and HotSync Manager could not deal with that, because I had everything installed.

  In any case, everything started to work properly after I installed Palm Desktop 4.2 directly in the folder C:\Users\Username\AppData\Local\VirtualStore\Program Files\Palm\

  (Of course, in all the above examples, substitute your own "Username" username.)

  My thought was to avoid the switch between the location of the traditional repertoire of the Palm and the location of the user directory style Vista by installing Palm software directory in the Vista style directory. I have not experienced any important matter. The only minor issue I have is that HotSync Manager does not automatically start despite being listed in the Startup tab in the Manager of tasks. I'm not going to tinker with compatibility modes and privileges trying to HotSync Manager starts when the computer starts. It is easy enough to just run it whenever I have to synchronize.

  You will also need to consider the order in which you install your office-side applications. For example, I found that one of my apps should be executed only once with admin rights so that he could establish his lines. Which seems to trigger a change in the location of the user directory for another application that I use - that does not allow the user to specify an installation directory. I got around this by implementing these apps in the order that I mentioned, while the other user directory would not be changed after creating the first led her.

  Of course, my solution has its limits, but it works for my single-user installation.

• problem to connect my palm treo750 with my laptop

  can you please tell me what software I need to connect my palm treo 750 with my laptop? also I lost my palm PC SUITE CD and also the data cable... Please help...!

  Harpreet says:

  can you please tell me what software I need to connect my palm treo 750 with my laptop? also I lost my palm PC SUITE CD and also the data cable... Please help...!

  Message is about: Treo 750 (Cingular)

• When I access a shared drive on my desktop from my laptop, WINDOWS SECUITY not WILL NOT stop asking PASSWORD INTERNET

  I read the exact message of 2010 covering this topic completely, and it was NOT resolved, then, or now.  5 years later, STILL not resolved because, like them, I tried Microsoft's answer and it still doesn't (turn off password protected sharing) as my has been extinguished.

  For the last year it wasn't a problem, then all of a sudden, it will be NOT SHUT UP AND GO AWAY.

  I have a laptop and desktop computer in my house. same mfg, same type of model, etc., same OS, WIN 7 Home Premium, 64-bit.

  My office is in my office, laptop is in the bedroom. Since my office is more powerful, I have several TB of STORAGE of USB on the desktop, on the laptop in the room, I remote in the laptop desk console, control and exploit office and the drive of the laptop. .

  To last year, when a shared has been evaluated, there NEVER DEMAND for Internet password until about a month.  But now he more furious than h... l as he won't stop asking the internet password, every start, every player.

  DOES ANYONE KNOW HOW TO MAKE WIN 7 SHUT UP!.  May remember the password as he says he will?

  It says "click the box to store references" What's this? A joke of Microsoft?

  One could think at the time of Win 7 came out, it would have been set.  But even on this Forum, 5 years later I asked the same question they asked in 2010 of this Forum.

  Hello

  Thanks for the update us on the issue and for the detailed information.

  TeamViewer is a third-party software, I suggest you to refer the link below and post a question in the support of the respective forum.
  https://www.TeamViewer.com/en/help/index.aspx

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps you. If you have any question with Windows, feel free to answer us.

• Software blackBerry CANNOT CONNECT MY BB CLASSIC FOR THE DESKTOP MANAGER AFTER the UPGRADE TO WINDOWS 10

  Hello

  I mix TRIED TO CONNECT MY BB CLASSIC BB after upgrade to windows 10.

  was a mistake to remove and reinstall Office Manager

  I have uninstall but could not install again bcs of error

  pls advise

  The best

  Yoni

  I managed to install.
  now everything is good
  THX

• Can I connect my printer on both a desktop and a laptop wireless?

  I have my Photsmartf HP Premium printer connected to my Compaq desktop computer via a USB connection.   Also, I have a HP laptop with wireless and wonder if I can hang it up to the printer using the wireless connection?  Can I use the two types of connectivity with the same printer?

  OK, at the front of the printer: Setup > network > Wireless Setup Wizard.  Run the wizard to connect the printer to the network.

  Then, delete all instances of the printer on your PC (start > Control Panel > printers).  Then, add the printer in this way:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Problem with Microsoft account won't let me sync between desktop PC and laptop (Windows 8) custom settings

  Hello
   
  Synchronization of the custom (for example, my desktop background) settings does not work between my desktop PC and my laptop and vice versa (both running Windows 8). I use my Microsoft account (so no premises) on both devices and have already checked the relevant synchronization (which are lit) settings. In addition, I used the "microsoftaccounts.diagcab", however unsuccessfully fix tool:
   
  Troubleshooting completed, problems found:
  • Problem with the Microsoft account strategy: don't not fixed
  • Some settings have disabled sync: detected (which is false)
  • Customization have disabled synchronization (which is false)
  • You have reached the daily quota of the synchronization. The quota of synchronization fade gradually. Please try again later.
   
  However, as a matter of fact sync was working, after I had created and used a new account from Microsoft on both devices. so I suspect something to be a problem with my original Microsoft account. Could you please check this account on your site and let me know your results?
   
  PS My original Microsoft account (that I created there) is the same account that I used to connect to this forum. If you need more information, please let me know!
   
  Thanks in advance!
   
  Kind regards
  Victor Alberts.

  It worked perfectly for me:

  Follow these steps:

  1. Make sure that the synchronization of personal settings is enabled on all the PC associated with your account
  2. Go here and follow the instructions: http://skydrive.live.com/win8personalsettingsprivacy
  3. Wait a day or two
  4. Do this it fixes going in charms bar and selecting settings-> change PC settings.  On the accounts section, there is a link under your Microsoft e-mail account called 'Disconnect '.  If you click on it and follow the instructions create you a local computer account and then log off from Windows.  Once you connect with your local account, go back to the account settings and reconnect to your account.

  Solved all my problems of synchronization.

  I hope this helps for you also!

  Robin

• Having problems connecting to my cellphone samsung sch-u370 to my laptop windows Vista dell Insp 1750

  Windows does not recognize bluetooth devices

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not resolve this contact the mobile phone manufacturer

• Hewlett Packard light / password for HP Pavilion G Series Laptop windows 7.

  I forgot the password to connect. Now got to a point where, when I switch on, I get a grey-blue screen box with power on password or enter the administrator password. Don't have it but after unsuccessful attempts of 3 disabled Code came up as 92917223. What must I do next that this code does not allow me to open the computer. Help. Thank you.

  Try Billy.

  23675805

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Unable to share files or printers between windows vista desktop and computer laptop windows 7

  I'm trying to set up a home network, I have a windows vista desk top and AComputer laptop windows 7 I have already created a network servant but no machines recognize each other

  Please see the advice contained in the sharing of files and printers with different versions of Windows and networking of computers running different Windows versions . Boulder computer Maven
  Most Microsoft Valuable Professional