HP 1217 printer: hp 1217 not light wireless

Similar Questions

• Wireless-G print server will not print

  I just installed my print server Wireless G on my Windows XP Pro and it is connected to my router wireless, but when I try to print nothing happens. My wireless router is a Cisco WRT54G2 V1 and my print server is a WPSM54G V1.1. I can print from my laptop with the print server, but my desktop connected to the print server pc can't. All the lights are on and the printer is ready and he is not in offline mode. I took the documents and he used always print

  My office is a Windows XP Media Center m7560n

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3189597

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  TechNet Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• V525W printer will not connect wireless

  I just moved and had to change my ISP.  Now, my V525W printer which was working fine, will not connect wireless.

  When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable".  The CONTINUE button dark rest.

  I tried every suggstion I find on the Board for more than three hours and still not get this piece of junk to work.

  I have an all-in-one Dell XPS running Windows 7 machine.

  Can someone please?

  Rick,

  After a few "cooling off" days, I decided to TANOE this problem again and it seems that I finally work!

  I went in the menu on the printer and restore the default settings.  I always had the same problem with the Installation of the Dell program I went into the Windows 7 Control Panel and clicked on "Add a wireless device to the network."  He immediately recognized the printer and I followed the steps until the light green enabled WiFi fixed.   Then, I went through the installation of Dell again and was able to print, scan, etc.

  Thanks again,

  Tom

• My lexmark wireless printer seems to not work whenever I run paper he says not comm.with printer

  I have a lexmark wireless printer that seems not to work whenever I run paper, its says not comm with printer

  Hi chinny111,

  ·         If it works well before?

  ·         Did you change?

  ·         What is the operating system installed on the computer?

  You can see the following Lexmark article and check if it helps.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  Respond with more information so we can help you best.

• He tells me printer spooler is not installed. Microsoft fixit did not select my printer HP 4795 wireless to install - it installed my old printer

  I received a message that says that my print spooler has not been installed.  I tried Microsoft Fixit.  They did not set my HP4795 wireless printer spooler, but my old printer downstairs.

  You describe (at least) two different problems.

  Please start by describing what version of Windows you have (right click on my computer > properties).

  Also describe what anti-virus application you have, even if his subscription is current and if she ever allowed to expire.  What other antimalware applications you have, if any?

  Can you give us the complete error message without paraphrase?

  Click Start > printers and faxes.
  Is the white screen or include all printers?  If your "old printer downstairs" appears, is it connected to your computer (wireless? USB?) and can you print to it?

  You have a wireless router? If Yes, what brand and model (see the label on the bottom or back)?

  It is much easier to install HP wireless printers using the CD provided with the printer by doing things manually.  However, before you try that (yet?), you might have to clean things, please answer the questions above.

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• PC not connect wireless to my brother 665 printer

  PC runnign windows 7 64 bit not connect wireless to my brother printer 665 cw. It allows to connect now, it won't. Running thorugh cradle Point router that says its connected.

  any help please.

  Hello

  Thanks for posting questions in the Microsoft Community. It seems that the computer does not connect to a wireless printer.

  In addition to answering these questions that would help us provide a better solution:

  1. what exactly happens when you try to connect to a wireless printer?

  2 have been updated printer drivers?

  3. were there any changes made to the computer before the question?

  Try these methods and check:

  Method 1:

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Try installing the latest drivers from the site Web of Brother MFC-665CW. Use this link:

  http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/DLF/download_top.html?reg=us&c=us_ot&lang=en&prod=mfc665cw_us_as

  a. click on the above link.

  b. Select the operating system. Click on search.

  c. download and install drivers and check:

  In addition, visit this link and check:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. If you have any other questions feel free to respond and we will be happy to help.

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

• Printer will not work wireless

  My printer has worked on my wireless network until a few days ago.  Now it won't print or scan wireless.  I tried to uninstall and reinstall.  She appears as the default printer on the network, but the information said it needs in the event of a problem.  I printed a page of test results who told me that it is connected, etc..  Another question I have is if the IP address must be the same on the printer that is on my computer.  Please help, I'm lost!

  Say, download and run printing HP and Scan doctor, what - what?

  http://support.HP.com/us-en/document/c03286146

• OfficeJet 6600: iPad suddenly can not find wireless HP printer.

  iPad, suddenly cannot find a working HP officejet wireless printer!  He worked recently.

  Hey @dburbage,

  Welcome to the Forum from HP Support.  I understand that you are unable to print from the iPad using your HP Officejet 6600 e-all-in-one printer.  I want to help you with this and can have steps that you need to restore this functionality.  What you describe, it seems that you use AirPrint.  I will answer my advice for this type of installation, but if you use ePrint, please let me know and I'll give the information you need.

  You have confirmed that your printer is connected to your wireless network?  Button on the front panel of the printer the wireless icon and make sure that it is connected and displays an IP address.  If this isn't the case, run the Wireless Setup Wizard to restore connectivity.  If you are connected, powercycle your equipment as explained below:

  1. Unplug your modem/router
  2. Turn off your printer and your iPad
  3. Wait 60 seconds
  4. Plug in your modem/router back in and wait that he reconnect to internet
  5. Turn on your printer and once it starts up as normal, confirm that it is still connected to your wireless network
  6. Turn on your iPad

  After completing these steps, you are able to connect your printer with the iPad?  Please let me know the result of your troubleshooting by responding to this post.

  Have a great day!

• Samsung ML2525W printer does not print, the Red toner light stays on. Replace toner, no change.

  My Samsung Laser printer is less than a year.  I rarely use it.  The red light by the symbol of the triangle (cartridge toner according to manual) came and I was no longer able to print.  I have replaced the toner with a new one cartridge, printer and USB for PC connection and turn it back on about two or three times.  No change.  I even opened a 2nd (new) toner cartridge and replaced thinking one of my 2 new ink cartridges could be a dud.  However, still no printing and the red light stays on.  Any suggestions?

  Hello

  I see that you mentioned that the printer is less than a year, so I would recommend that you contact the manufacturer of the printer to help. The issue seems to be with the material.

• Printer will not work wireless, says that it is offline

  I can't get my printer to work with the wireless.  Message is printer offline.  Went through all the devices help menus. Only to print manually connect computer and printer

  View help and FAQS on your unknown printer support site to the

• Satellite P100: BI - mail/net/print Touchpad do not work

  Hello

  I was not able to get my mouse pad to load the features for a while now, and I thought finally try and find help on this forum.

  Basically, the mouse pad and keys still works without problem, but the 3 icons in Quick Launch bar volume and messaging/net/print icons do not work...

  I can't get the blue light to show on the mousepad either so I think that some kind of pilot is missing?

  I don't know if it was very clear, but if someone knows how to get the special features of touchpad to light again made me know!

  Thank you

  FC

  Hmmm... missing?
  You got your laptop with pre-installed software and I can't believe that something is missing.
  The question is what you did to make it work.

  Have you perhaps installed updates from Microsoft for touchpad?
  What P100-xxx you have exactly?

• HP Envy 4502: printer connection on my laptop wireless problem

  I installed the software on the disc that came with my new HP Envy 4502 printer on my HP laptop. He says that the software is installed correctly, but the printer is not connected wireless. Have you tried connecting via the usb cable and it worked. However, whenever I try to connect wirelessly, it fails to connect.

  I tried troubleshooting tips sevral time but still have no luck.

  My husband was able to insert the disc into his Dell laptop and connect the printer even wireless with no problems at all. This laptop is Windows 7 Professional.

  I'm getting more and more frustrated by the present, thank you I am a novice where computers re concerned, but that he thought that by purchasing an hp printer to go with my computer hp laptop, things would be easy.

  Help, please

  Take a look at this link on the implementation of WiFi.