HP 14-ac015tu: problem driver hp 14-ac015tu win7

Similar Questions

• NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

  Hi JimmyGoings,
   
  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
   
  In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
   
  You can follow the steps in the article given below to resolve the problem.
   
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
   
  Check to make sure that the controller is enabled in the BIOS, if there is physical damage to a motherboard, it is usually fatal.
  In addition, go to the nvidia /drivers and automatically search the chipset drivers and install it.
   
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• He driver Logitech H330 for Win7?

  my laptop is windows 7 Enterprise Version installed, but I can't find driver Logitech H330 for win7, how do I find the Logitech H330 driver for win7?

  Hello
  As Mike Hall said above, drivers will be included with the update of Windows. Since you get this error when you try to run Windows Update, I think we should start to solve this problem first.

  Please see this thread to try to get smooth it.

  http://support.Microsoft.com/kb/918165

  Once you are able to install the Windows update successfully, the headset should work fine.

• Activation problem occurs when I use Win7 via VMWare.

  Hello guys,.

  I use a Win7 Ultimate installed on my macbook through bootcamp. It is enabled and works well. However, the activation problem occurs when I use Win7 via VMWare. A solution that keeps popping up is to use the phone activation and wait for the representative of the other side to help.
  I am currently in Cambodia, and they have not MSFT representatives here to answer. I'm calling them (the Singapore not. and the Viet Nam not.) with my Skype credits, but I am unable to connect.
  Please advice!
  Thanks in advance!
  
  Original title: activation issues

  Hello

  I suggest you choose the near by countries and by calls to this phone number. If you do not have representatives MSFT, and then try another nearest selection of countries and calls for a number.

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problem Driver ATI 9700 Windows Vista on a P10 792

  I tried Windows Vista beta 5308 in my Toshiba P10-792, and I was unable to get graphics accelartion with Windows Vista Driver for Ati 9700 graphics, which is is built in P10 - 792.
  It displays an error code 43.

  After some research, I found http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=268378&SiteID=1

  Some people suggested to get the last update of the bios for laptop. I've updated to the latest version of the bios, but the problem persists, someone has the same problem?
  Any help would be valuable.

  Thank you

  Hello

  Usually, you use the graphic drivers of Toshiba Toshiba laptops.
  I found the description of the error 34 on this site from Microsoft:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 310123 #XSLTH3439121122120121120120

  34 error code: Windows cannot determine the settings for this device
  Solution:: the device requires manual configuration

  Well, the fact is that Windows Vista is not official on the market and there is a lot of necessary test. Moreover, Toshiba doesn't utter the graphics driver for Windows Vista at this time. In my opinion, wait for Toshiba graphic driver. I m sure that the original Toshiba graphics drivers will work in the future.

• Qosmio F20 - display problem, driver problem-possible

  Good afternoon

  I am in possession of a portable type Qosmio F20, which belongs to a friend. She told me that the screen went all the matrix as so that it was just empty. She claims not to have installed any software or updates recently.

  When turned on, the Qosmio logo on black background appears, then it appears a black screen with a lot of white lines vertically downwards. He then referred to the Windows XP logo, but this time with green lines appearing vertically down the screen, a little style of the matrix, I guess! After that, the screen is completely empty and the laptop will recharge itself, or occasionally I hear it start windows.

  I can enter in safe mode and discovers everything fine. If I uninstall the driver, it works very well and boots as normal, then invites me for a display driver. As soon as I install the driver that I downloaded from the site Web of Toshiba (NVIDIA GeForce Go 6600) and reboot, the same problem occurs. If I install the driver, and then select do not restart, it's ok. But as soon as I go to display settings and try and change anything, the screen turns off instantly again.

  I tried to roll back to an older driver that has been dated to 29/08/2005 v7.8.9.2, but still the same problem.

  Can anyone suggest a possible solution for this? Or is there a problem with this I don't know? The operating system is Windows XP Media Center SP2. He worked very well until yesterday morning apparently.

  Thank you very much

  Hello

  It's certainly a bad operation of the equipment and I'm sure that the graphics card is defective. The warranty is still valid?

• Installation problem driver sound on Lenovo G550 - Windows XP

  I installed windows XP on my lenovo G550. As indicated on the lenovo site, I tried to install 'Conexant Audio Driver' for my audio driver but it is a failure. I open the Readme file, it says something like "change Point: Add.» Net3.5 in the driver package "-it means that this driver installation must dotnet 3.5, or they have updated the driver to support dotnet 3.5?"

  I want to install the driver from the following link

  http://consumersupport.Lenovo.com/en/DriversDownloads/drivers_show_1402.html

  but this driver is a failure.

  Can someone help me please to find the audio driver for windows XP

  Thank you

  Noémie

  subject published

  I solved the problem!

  the path is:

  works

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-69852#audio

  Install it

  next XP find hardware audio

  then use this driver

  http://consumersupport.Lenovo.com/en/DriversDownloads/drivers_show_1402.html

  Audio C:\Drivers\Conexant Driver\XP32

• problem drive hard HP tools

  I have HP G62 - 223CL for a few days now and I have a problem with partition tools hp... I get these notification about small footprint on the partition of hp tools who 93.9 MB of space altogether... now, I have lots of files in there, I can not erase.when I try it says 'this is more in E:\. Check the location of the item and try again"I don't want to spoil something so im asking a notice.

  Thank you

  Please make sure that you not save files on a partition of HP tools.

  If you have insufficient disk space in your drives, then you can get annoying pop-up Windows messages are you low disk space. This can become extremely annoying sometimes, to disable the function of disk space low notification, follow these steps:

  1. start regedit.

  2. navigate to:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  3. create a new DWORD value and name it NoLowDiskSpaceChecks
  4. click on this new value, and then click change
  5 type 1 in the value data field, and then click OK
  6. close regedit and restart your system
  7. the low disk space messages should be gone.

• Problem drive Installation in Windows XP Professional Version 2002

  Hello, I had problems with my Installation of Windows XP Professional disc, that is authentic. I run the Setup, everything is going very well... I get the "Welcome" screen I press F8 and then he said something in the sense of "we see that it is empty and almost died, go buy another drive of installation if you are qualified or something." It is a legitimate disc, I used this before a long time ago, and I have still 3 uses on it. I check my settings, all right, and the computer was made for Windows XP.

  Is there something wrong? What I really need to get an old installation disc, which will probably costs me about $ 50 just to get shammed?

  Please answer.

  Thank you

  Voizak Gyrith

  1 CD can get damaged or dirty, but...

  2. to learn more, you must provide the exact text of the error message.  It appears from your description of the error message, if you have an installation CD 'upgrade '.  What is the screen that you see? -->

  

  If that's what you see, you will need to find a CD for one of the listed versions.  You should be able to find one of these for not much money... very few people is eager to something like Windows 95 install these days.

  3. you shouldn't be pressing F8... at least not with a normal Windows XP installation CD.  For the sequence of screens, you see, look here--> http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

• Download all-in-one problems driver HP psc 1350

  Hello

  I have a Toshiba laptop and a printer all-in-one hp psc 1350.  Both worked fine until Sunday.  Now the printer will not work.

  The light on the printer is constantly on when it is attached to the power, I can press the button, so it doesn't seem to be broken, but the light does not turn off.

  When I remove the power cord, the lights to scroll the Panel of the printer (and the button light goes off momentarily) then the light on stays on and will not turn off.

  I did not download the updated driver from Windows Update or all Web sites automatically or manually - TOSHIBA USB DVB-T/analog hybrid Tuner (391 KB).  Still, the download fails. I also tried installing Microsoft FixIt, but he tells me that he has no problem.

  Does this mean that the driver is the issue, or do I have to buy a new printer?

  Thanks for your help.

  Hi Gerri_31,

  I understand that you are not able to stop the printer with the power button.

  Thank you for your response.
  I'll be happy to help you with this.

  I'd do a power reset to see if that will solve the problem. When the printer is still lit, disconnect the power cable from the back of the printer, press and hold power for 10 seconds to drain any power, if the printer has external power supply with a detachable power cord unplug for 15 seconds and reconnect it. Then, disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  I have provided a document for power issues.

  The HP printer power on not or answer.

  If these steps do not resolve the problem, so that I would recommend to call the HP Technical Support
  more help to see what other options are available to you or to know the
  trade and commerce to the top of the program.

  Contact HP worldwide.

  I hope this helps.
  Thanks for posting on the HP Forums. Have a great day!

• BSOD network, related function for Winsock problem driver-related

  I'll give as much detail as possible in order to get the right answer.

  I'm working on HP G70 - 463CL with Vista Home Premium 64 - bit.

  The problem is that whenever we try to use something that would require a network function, I have a BSOD with the IRQL_NOT_LESS_OR_EQUAL.
  This occurs even if I plug in a network cable, try to run a web browser, or right-click on the signal wireless in the bottom task bar.

  When the computer reboots, I get the "Windows has recovered from an unexpected shutdown' with this information.
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  LocaleID: 1033

  More information about the problem:
  BCCode: a
  BCP1: 0000000000000000
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF80002228C45
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  He then lists the minidump file which I do not know how to open it.

  I went to HP and download the current network for the WLAN and LAN drivers. (I have uninstall the previous)

  I went to Services to see what didn't work and I got these errors when I tried to start them.

  The DHCP Client 1.) -Error 1068: the dependency service or group could start. So I clicked on the dependencies and seen that it relies on the "accessory function for Winsock driver" and the "WinHTTP Web Proxy Auto - Discovery Service" depends on DHCP.

  TCP/IP NetBIOS Helper 2 properties.) -a had the same message according to the 'related function pilot' and it depends on the NETBT.

  I have passed to the command window and tried ping 192.168.1.1, and got the error that transmit failed, error code 1231.

  I have also reset IP address and with the command netsh winsock

  I went to Device Manager and click on devices show hidden.

  Under the pilot no Plug and Play there was a yellow by 'Related function for Winsock driver' symbol when I click Properties, it says under the status it is not working properly or has not all the drivers installed (Code 24).
  I also had a yellow symbol of security processor Loader driver and the same information under properties.

  In searching the Internet, I tried several different things that I found and tried including change something in the registry.  At one point I was able to make wireless work and managed to get on the internet and ran Windows Update and downloaded several items.  After the reboot, I clicked on an Internet Explorer icon on the screen to come back on the internet and I got the blue screen again.

  I ran Malwarebytes and it found nothing.

  I uninstalled AVG 8.5 and was going to install a different virus protection and I have a feeling that this is where the problem started.

  So if anyone can offer help, I'd appreciate it.  I have a feeling that everything hinges on the related function driver but do not know how to reinstall.  The hard drive has a recovery partition, but I don't want to reinstall the OS.

  There are a few issues, including the duplicate property and lack of records relating to the CPU.

  While this can be traced back to file by file, the best way to solve the OS when SFC finds files that it cannot solve is to do a repair of the DVD of the OS installation.

• PCI device & problem Driver control Ethernet in HP 2000-2128TU

  Name of the product - HP 2000-2128TU

  Windows 8 and 7

  After using a few months Windows 8 in my laptop suddenly I did deal with any Modem does not work. Unable to connect to the internet. Then I found after a huge search with some error in PCI Device Driver, Mini Port network.  And I can not solve. Then I downgrade mu camera to Windows 7. Now each Modem works well, but I have the same error my Ethernet Control PCI Device Driver & driver.

  Help me how I solve the problem. I don't know yet what kind of problem it is. but I got the error in the other devices section of Device Manager.

  Hello:

  Here are the links to the W7 drivers you need for these two devices:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104713-1&CC=US&DLC=en&LC=en&os=4063&Product=5305458&sw_lang=

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104710-1&CC=US&DLC=en&LC=en&os=4063&Product=5305458&sw_lang=

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem Driver network Dell Latitude E5570 with MDT

  We received a lot of laptops Dell Latitude E5570. I want to install a picture on them, using MDT. I downloaded the file CAB for Windows 7, A02 08/03/16. Added to the output of the drivers on MDT as usual, then updated the deployment share.

  When you try to start the installation, I get an error in the wizard. Connect to the deployment share could not be established. The following network device has not been installed, PCIVEN_8086 & DEV_156F & SUBSYS_06DF1028 & REV_21

  I tried download the drivers for the network card on the Intel site and their import. This time, I can access the task sequence list. There's nothing wrong with the first part of the installation. When it comes to complete the installation, I get the same error of Assistant on the network device.

  Any suggestions would be welcome

  I finally got mine work. Drivers is must always use a combination of the taxi driver from Dell and Intel driver. If the version 3 of the TAXI driver who has been published will solve the problem?

  I try to import the driver directly from intel first as well as the cab file and see if it works. This is the link I used: downloadcenter.intel.com/.../Intel-Ethernet-Adapters-Connections-CD

  In the end, I think that my question was due to the SSD and the fact that I tried to start Win 7 x 86.

  After reading a couple of different forums, it seems new SSD require UEFi start to run, which is not supported in Windows 7 x 86. I tried an image with Win 7 x 64 and it worked the first time.

• dv4-3106tx: installation problem driver Bluetooth

  Hello and good day,

  Im having a problem with my built-in bluetooth. Before this all works fine until recently I can not discover device bluetooth, send/receive files. And I have every confidence, uninstall the driver for bluetooth device manager with the intention to reinstall using the driver included in the C: drive.

  However, the problem is when keep Windows install that driver with built in driver provided with windows. I thought: Oh ok nevermind, I'll just run the setup and it will overwrite and use the Ralink/Motorola bluetooth driver instead.

  But this isn't the end. When I run the Setup, I get this dialog box

  

  and I select Yes, 'restart the computer now' and click Finish. Then the computer will reboot and restart the installation, and again once I got this same message again... again and again and again.

  So I'm pretty much stuck now. For now, the bluetooth is installed with built in the windows driver used. But I can't find out, send/receive files either.

  Any help is very appreciated.

  Thanks in advance.

  Oh my god. I am completely forgotten this thread.

  In fact, I managed to solve the problem of bluetooth by:

  1 get the driver, my friend backup files. It uses same lappy with me. I asked him to save the driver software Driver Magician.

  2. I run the Wizard software and do the restore. Then, it requires a reboot. Restart the computer

  3. upon reboot, I started the installation of bluetooth driver software and he manages to complete the installation without any problem.