HP 15-f009wm: impossible to get bluetooth to work

Similar Questions

• Equium A100-147: Impossible to get Bluetooth to work

  I bought an Equium A100-147 last week and noted in the manual it should have Bluetooth capabilities. However, I can't get this to work. I looked for my phone, and it does not pick up the computer as a bluetooth device. In the help files, it says I can set it up in the bluetooth settings in the Control Panel, but there is nothing in there. I tried to install the battery Bluetooth Toshiba, but it keeps asking me to install the bluetooth device.

  This computer actually has bluetooth abilities or not? If so, how can I get this to work?

  See you soon

  Hello

  Each unit with BT has BT label in the lower corner. Something like this http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm

  If you do not find it the BT is certainly not available.

• Impossible to get bluetooth to work on the satellite a series

  When I bought my laptop it stated on the box that it is compatible bluetooth. I tried since to know how to use it but can't find anything on the menu, even through the search tool. Bluetooth does not appear in Device Manager (menu assistance took me by that), but after looking in the menu programs and features, it shows "Bluetooth stack for windows by toshiba"!

  Does that mean that my laptop IS bluetooth enabled and if so anyone know how to use it?

  Hello

  BT is quite simple to use. The WLAN switch on IT (the WLAN led should be lit). After you do this using FN + F9 key combination and activate the BT device.
  I guess that laptop will install some components and all components of BT will be displayed in the Device Manager.

  All that s!

• NB520 - get Bluetooth to work

  Hi all

  looking for advice on setting up bluetooth on my new laptop.
  Can't get the bluetooth device work properly.
  I downloaded the bluetooth driver package monitor & filter on the Toshiba site, nothing happens.

  Any advise?

  Also, I was informed there is a bluetooth 3.0 update available, but I am at a loss on how to do it too!

  Any help appreciated.

  First are you sure that your laptop supports Bluetooth?
  You have BT label at the bottom of the unit?
  What NB 520 - xxx you have exactly?

• Satellite L300 - 22 X - cannot get Bluetooth to work

  I got the L300 22 x last week, it says on the box and told me at the time, it comes with bluetooth, but I can't make it work please help!

  on the front of the laptop, there is a wireless switch, which I turned on it lights like orange, but my phone does not find it and when I go into the control panel to try locat any info on the bluetooth is not here to select. I'm starting to wonder if it is installed or not, but why he would say it has bluetooth on the box, if it is not. If anyone knows the answer please help. model nu PSLB8E-0PS007EN.

  Thank you

  Joanna

  Hello

  You will never get Bluetooth works on Satellite L300 - 22 X because it s not equipped with Bluetooth. I put t know who told you this information, but it s wrong.
  A friend told Satellite L300 it s not equipped with Bluetooth too.

  But it uses an external USB Bluetooth dongle which bought in a store of the computer. It wasn't expensive t, but he can use Bluetooth! :)

  Perhaps this is an option for you

• Satellite A300-1MC (PSAG8E) - get Bluetooth to work

  Hello

  I just bought a toshiba satellite a300-1mc and cannot get the bluetooth to work on it. ???

  The box says it has built in bluetooth, but even when I reinstall the bluetooth stack he will not recognize the built-in bluetooth device, it just says: connect a bluetooth device and press ok or cancel the installation? I can't take this wise because it only picks up the built-in bluetooth device?

  I checked the hardware Manager and can not still find something to do with bluetooth

  Any help would be very appreciated that I could really do with the bluetooth on my laptop.

  The box say it has bluetooth, it's why I can't work on why I can't make it work

  I'm not sure that if I deleted something... when I first got this laptop, it took about 5 minutes to start so I disabled a startup programs load... but I do not remember stop bluetooth... and I checked to see if I disabled something.

  HELP me please lol

  Rolex is right. I ve checked the specifications specification and Satellite A300-1MC is delivered without BT module. :(

• Cannot get bluetooth to work on T410

  I have a lenovo t410 I'm not able to get the bluetooth to work. According to the lenovo Web site, my configuration came with it. ThinkPad T410 2537 C 84. However, when I click on the bluetooth icon nothing happens. I've uninstalled and reinstalled the driver and click on bluetooth icon still does nothing. Also the bluetooth does not appear when I press fn + f5 that is only the wireless adapter.

  Sorry for the long break in my response, Mardi Gras is passed here in New Orleans. This is the bluetooth adapter cable. I bought a new cable and adapter, replaced and it works. Bluetooth was not appearing in bios so I thought it should be material. Thanks for your help.

• Cannot get bluetooth to work on my Qosmio F10

  Hi, I have a Qosmio F10 but can't seem to use the bluetooth devices. When I went in the bluetooth devices Manager and tried to add a new device, said bluetooth was off and then I went in an another bluetooth application and who says it could not load the bluetooth startup file (although when I checked, it was on the computer).

  Stupidly, I then installed something called Bluetooth Monitor 2 but this actually took away all bluetooth files and I could not find the bluetooth manager plus. I uninstalled this Bluetooth Monitor 2 but still can't find the old files.

  I was wondering if someone could help? I realize it's a guy very newbie Q but I hardly ever use my laptop and can get the bluetooth works fine on my desktop.
  Any help would be greatly appreciated.
  Thank you

  Hello

  I do not know what F10 you have exactly, but as far as I know that some of them are without Bluetooth. Each unit with BT has a Bluetooth key in the lower corner.

  Also check this please page http://aps.toshiba-tro.de/bluetooth/.

  Good bye

• Impossible to get Firefox to work.

  No matter what I try, I can't do your browser. Something downloaded avast and now ALL I can get is Yahoo. Help, please!

  Happy to help you.

• Satellite M60 - 164 get bluetooth to work

  I want to know if my pc has bluetooth on it, it seems she is in the device maneger but I can't make it work so I'm wandering if he is actuly on the phone it has a section in the control panel can anyone help please

  Hi mucklin terry

  I checked the Satellite M60-164 information and it seems that the Bluetooth is not available on this device.
  In this case, the only way to use Bluetooth technology is to use the PCMCIA Bluetooth card or the USB Bluetooth key.

• Impossible to get Clip + to work in the Honda Accord

  In my Honda, mode to THE, I can't get the Clip + to work.  I was back and forth between the MTP and MSC.  My old Sansa works very well.  What I am doing wrong?

  Your car stereo is probably looking for a device to MSC base. If your music has been loaded from a computer with the Clip + in MTP mode or Auto Vice, your car stereo will be probably able to find.

  If this is the case, change the Mode USB MTP setting, connect to your computer and move (not copy) all the files on the computer. Now tell-connect, switch mode MSC, reconnect and copy (and not move) the files to the player. This will leave copies of backup on your hard drive. Now connect to your car stereo and it should work.

  Note that sometimes the stereo channels is not enough 'smart' see files stored in a folder of music. If after doing the above, you still have problems, try highlighting all the folders/files 'in' you music folder and moving them to the top directory or 'root' (at the same time the music folder). So he could see them. You can delete the empty music folder if you wish.

  Miikerman also has a good point. Your car stereo will not be able to see 2 memory locations, as in the internal memory and external memory card. He reads only the files from the internal memory.

• Impossible to get moviemaker to work on my computer. always get the error message, asking if I want to send an error report. __

  trying to open movie maker I get the winbdow which says "windows movie maker has encountered a problem and needs to close" and then askss to send an error report. Downloaded the program again, but keep getting the same message

  Hi jovato,

  Remember to make changes to the computer before that happened?

  I suggest you try the following steps to refine the question:

  Step 1: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 2: Download and install the latest service pack on the computer

  
  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/default.aspx/KB/935791

   

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to get two SourceStreams work for a data source

  The player does not seem to automatically use all SourceStreams provided by a given data source. I have two that are available through the DataSource #getStreams () function:

  * Video H264

  * AAC audio

  Only the first SourceStream is read in. Is there something special that needs to be defined or added to make all both get used?

  Yes, the implementation of the RIM does not follow the spec of J2ME and the javadoc. A single SourceStream is supported and the rest are ignored. It comes from someone on the EDGE.

• Impossible to get keylistener to work on the app

  I'm trying to get back on the phone button to work on my application, but it only quit the application when pushed. I want to go back one screen. My application to open a browser, and then I created this class:

  public class keylistener implements KeyListener {

  {} public boolean keyChar (key char, int status, int time)
  Returns false;
  }

  {} public boolean keyDown (keycode, int, int times)
  If (Keypad.KEY_BACKSPACE is {Keypad.key (keycode))}
  Consume the event.
  Here I use the event for the escape key
  Returns true;
  }
  Let the system to pass the event to another auditor.
  Returns false;
  }

  {public boolean keyRepeat (keycode int, int times)
  Returns false;
  }

  Can someon if you please help me understand how to make this work?

  How do you need process that EVASION depends on how you arrived at the screen you are currently.  Usually, we'll push a new screen on top of the previous, so all you need to do is to pop this screen the display stack and the old screen will be displayed.  To do this, you could code something like:

  {} protected Boolean keyChar (character char, int status, int time)

  switch (character) {}
  case Characters.ESCAPE:
  UiApplication.getUiApplication () .popScreen (this);

  Returns true;
  by default:
  Return super.keyChar (character, status, time);
  }
  }

  But sometimes you can keep viewing the battery deep, just a screen by pushing and popping when you move between screens - this is what you would do to simulate a screen for example.  If you do this, then to deal with an ESCAPE, you must push the previous screen and then current pop.

  Does make sense?

• Impossible to get Clipboard to work using WINDOWS 7 HOME PREMIUM

  I can't get the Clipboard to work. I use... WINDOWS 7 HOME PREMIUM. I'm pretty calculates illiterate; but can share specific details of Neuropsychiatry. :)

  If anyone can help that doctor who has three masters degrees... but needs quite simple directions, I woud be very grateful.

  Thankx, ANANKA

  08/04/2011

  I don't know exactly what problem you are having with the Clipboard, but the following link can help for a potential problem.  If this isn't the case, answer with more details on what is the problem. Also, if you try to copy the screen to the Clipboard, know that, in addition to PrntScrn, Windows 7 has a key "capture tool" (type Snipping Tool in the search programs and files box immediately above the button Start.  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/where-is-the-Clipboard-on-Windows-7/3bf718eb-5c47-E011-90B6-1cc1de79d2e2  Re this thread, you can also just paste in a painting or another application to see what is in the Clipboard.