HP 15-g088ca: issues of recovery and memory Fail

Similar Questions

• Failed hard drive on HP laptop. After replacement, can I put OS and memory?

  I have a HP Pavilion Entertainment Notebook PC, model dv9617nr (HP pn GS730UA).  An error message at startup says "Operating system not found" so my Windows Vista Ultimate 32-bit (updated two years ago) does not load. I guess that means that my hard drive has failed. How can I test this hypothesis? Yet once, guess I am not mistaken, and I ordered the recommended replacement (pn 590736-001 HP) of spare parts warehouse ($142.50 plus port charges). Are there instructions on internet to make this replacement? After I do this replacement, I thought I could install Windows 7 I have and upgrade to 4 GB SODIMM the 1 GB SODIMM memory that originally served as. What problems I have with hardware compatibility with Windows 7? If the memory module that I use has the same features as the HP recommended replacement (pn 598861-001 HP), i.e. 800 MHz, 200 pins, PC2-6400, SDRAM, but greater capacity memory of 4 GB, I have compatibility problems to use it? Please advise me on these issues. Thanks, Jeff

  Hi, Jeff:

  Let me knock your question...

  First, to confirm that your HARD drive is dead, go into your BIOS menu. There should be a diagnostic utility hard disk and memory.  Run the HARD drive Diagnostics utility and see what it reports. More that likely that the disk HARD fell down, and is more usable.

  You can order a replacement disk or you can get just about any hard drive SATA II - 5400 RPM or 7200 RPM.

  You could go to 250 to 500 GB, if you choose. Unfortunately at the present time, HARD drive prices are unreasonably high due to the flooding in Thailand, where many HARD drive manufacturing plants. Some have been damaged heavily, causing HARD drive prices triple almost from one day to the next.

  This is a disc, you can get that I think is better than what you have now: this one is 7 200 RPM. Faster but uses more energy.

  http://www.Newegg.com/product/product.aspx?item=N82E16822136279

  You can get the version of 5400 RPM... too similar. Not as good as the caviar black. It's more along the line of what you would get at HP.

  http://www.Newegg.com/product/product.aspx?item=N82E16822136387

  Read the comments at the same time, or you are free to get HP.

  There are instructions for installing the hard drive and memory on your laptop support and driver page. Click on the manuals on the right side of the page.

  http://support.HP.com/us-en/document/c01278446

  So, you want to watch the maintenance and care guide.

  You can upgrade the memory to a maximum of 4 GB by using 2 x 2 GB memory PC2-6400. You can get it at HP, or you can get it on the link below. It is the memory that I use. In fact I just ordered this same memory to install my sister-in-law in dv6700.

  http://www.Newegg.com/product/product.aspx?item=N82E16820148159

  Now you can install W7 very well. I installed W7 Home Premium 64 bit on my dv6810us which has pretty much the same material as your and 4 GB of memory (the same that I posted above).

  However, here's the catch. It depends on what version of W7 you have. If you have a W7 upgrade version, you must install a qualifying operating system on the hard disk before you can improve.

  If you have a full version of Windows 7, then you can install it on a blank hard drive.

  If you have the version upgrade, contact the HP support and ordering a set of recovery disks Vista. Install Vista, then uprade to W7 if you have the updated release of W7.

  You can use the vista drivers support page of your laptop for all the drivers you need that W7 has no power.

  One thing... NOT (updated flash) BIOS while running Windows 7. You can Flash only using windows vista.

  I hope this helps. If you have any other questions, please let us know.

  Paul

• HP pavilion ab-516tx: disk recovery and other readers gets automatically complete

  my disc recovery and other readers to complete slowly as I began to work, is there any virus or it is an internal problem.

  can you help me out of this, is there a solution?

  Hi @Sahilchhabra,
  
  Please become a member of the HP's Support Forums. I understand that you have disk space issues. I'll be happy to help you.

  Please see the following documents.

  Resolution (Windows, 10, 8) low disk space errors

  Screening of hardware failures (Windows, 10, 8)

  As to your question about a virus here is a link that may help.

  Computer may be infected by a Virus or malicious software (Windows, 10, 8)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Qosmio F15 - issue of recovery PROCESS1_INITIALIZATION_FAILED

  Hi all:

  This laptop has been infected with tons of spyware and a nasty virus disabled things like the ability to view the elements of the workstation in addition to shared folders. He changed the time and instead put the infection by the Virus or something to that effect.

  He had pop ups and was not easy to manage, so I used the Toshiba Recovery and Applications format of the HD DVD, then reinstall it by default. Complete installation with no error message. Then when it restarts, it goes to the start Qosmio screen and then flashes (very quickly) and a blue screen then travels to the menu of the advanced options (where you can choose Safe mode).

  Regardless of the mode that I choose, it will always be the same thing-show the Qosmio screen, a quick blue screen, then return to the menu advanced options.

  XP Media 2005 Edition came with the computer, but as the CD of the plant was not working, I decided to try to install XP Pro. Shortly after that it starts to install the Setup files, I get a blue screen with the following text:

  ************************************************** ************************
  A problem has been detected and Windows has shut down to prevent damage to your computer.

  PROCESS1_INITIALIZATION_FAILED

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000006B (0X0000003A, 0X00000002, 0X00000000, 0X00000000)

  I hope someone has some good advice because I am pulling my hair out. I don't think it could be a HD crashed because he was working fine-i mean of the system has been infected, but the HD worked very well. Someone please help =)

  > I'm completely at a loss...

  Might be time for professional help. What do you think?

• HP15 ab029tx: window update 10 problems should return to 8.1 windows using recovery and come back later

  My computer hp 15ab029tx laptop came pre-installed with win 8.1. I've recently upgraded to win 10. However, after upgrading, I found the following issues. I installed the latest version of the bios and all drivers are up to date on hp site.

  the problems are.

  1. edge flicker browser. Sometimes I use chrome so ok.

  2. autonomy is by 2 hours earlier, that's around 3: 00.

  3. laptop gets very hot. I found coolsense does not. There is no setting of tdp in the power profile. TDP settings was present in windows 8.1.event viewer is full of errors of health active hp, intel dptf, etc.

  error dptf Intel

  Intel (r) platform dynamic and thermal environment: Requested (8.1.10600.150) TYPE: ERROR

  DPTF Build Version: 8.1.10600.150

  DPTF Build Date: June 26, 2015 11:46:12

  Source file:...... \.. \.. \Sources\Policies\PolicyLib\PolicyBase.cpp @ line 693

  Function: PolicyBase::releaseControlofOsc

  Message: Impossible to release the OSC: failure when executing _OSC:

  DPTF Build Version: 8.1.10600.150

  DPTF Build Date: June 26, 2015 11:46:12

  Source file:...... \.. \Sources\Manager\EsifServices.cpp @ line 473

  The enforcement function: EsifServices:rimitiveExecuteSet

  Message: Error returned by the function interface IBSE services call

  Member: NoParticipant

  Domain: NoDomain

  IBSE Primitive: SET_OPERATING_SYSTEM_CAPABILITIES [93]

  Instance of IBSE: 255

  IBSE return code: ESIF_E_UNSUPPORTED_ACTION_TYPE [1202]

  　

  Policy: Policy critical [0]

  Active health HP errors

  COM exception running a command GET Casl EmbeddedController.AuditLog.JSON = return value from the BIOS, which indicates a value of invalid command. : one or more arguments are invalid (Exception from HRESULT: 0 x 80000003)

  4. several fonts of applications is blurred. I use 125% recommended implemented nationally as a 1080 p screen. all drivers intel & nvidia graphics are more recent.

  5. after sleep / standby wireless works irregularly unless I turn it on / off manually & special keys on the keyboard do not work until I restart.

  6. portable seems overall gloomy. (seems to be however performance tests indicate otherwise). Apps to take longer to open.

  So should I go back to earn 8.1 using recovery and wait for more late say 1 year when all bios and driver problems are sorted.

  My main problem is the short battery life and the laptop heats up.

  Concerning

  That's what I'd do - return to Win8.1.

  I have a laptop HP Dv6 Win7 running and the upgrade of Win10 has been a total disaster.  I restored using Win7 HP recovery media.  I'd rather have a BONE more old where everything works, only a new operating system where things do NOT work.

  As to wait a year, the FREE upgrade expires end of August 2016 - so after that, if you still want to upgrade, you will need to purchase a license - and, unlike with previous versions of OS, MS said nothing about the price for upgrade license, or even if such a license will be available then.

• How to use data recovery in memory of "D"? The computer did not contain a wrioter of C/D, so I couldn't make a recovery disk.

  How to use data recovery in memory of 'd' (about 10 GB)?

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask your manufacturer of computers for the EXACT method to restore to factory settings.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• Difference between (minidump) and (memory.dmp)?

  Separated from this thread.

  is there a difference between (minidump) and (memory.dmp) I use windows 10

  The main difference is size. Memory dumps are larger and contain a bit more information.

  In most situations, it is best to configure the computer to produce a dump of memory the kernel in case of system failure. A complete memory dump is a very large file to manage so it is more convenient to work with kernel images of memory when you try to resolve the blue screen errors.

  I suggest that you change your dump file settings to produce an image kernel memory. Select the hotkey Win + X , Control Panel, system, advanced system settings, Advanced tab, and click the button settings to start recovery. Under system failure, select the checkboxes before to write an event to the system log and restart automatically. Change the option Write debugging information by using the scroll to the right for image kernel memory. Click OK , and in the next window, click apply and OK. Restart your computer to apply the changes.

• T60: disk and memory upgrade and OS reinstall

  I have a T60 1951-CZ1, 2 GB of RAM, 100 GB HARD drive.

  I need to upgrade the max memory as possible and replace with a 320 GB or 500 GB HD. What are the supported elements that I need to order?

  Also I have to re-installed factory OS WIndows XP Professional. How to do this?

  I've traveled a lot of messages and lenovo support pages, but I couldn't find a complete answer

  Thanks in advance

  After all, it's easy

  I finally solved it

  I bought the upgrade memory and a new drive

  I ordered the 1 + 5 rescue & recovery and product recovery CD

  I reinstalled the XP Professional factory (rescue and recovery disk is not explicit about the possibility to reinstall on a new drive, if the precedent was broken, but finally I found the way)

  I did all the updates through microsoft software updates site

  Thank you all for your suggestions which lead me to solutions

• How to set the processor affinity and memory.

  We have explicit recommendations of our application provider to set the processor affinity for one of our virtual machines running their product. However, this process is not quite clear to me despite the available docs. We are company ESXi 5.1 more.

  By looking at the tab "resources" for the parameters of the virtual computer you see under CPU:

  Actions (I would do that quite high so that it never goes to confront other good?)

  Booking

  Limit

  The requirement is to set aside x cores for the virtual machine while it is never claim to waiting or resource. They would also potentially implement affinity memory related to the same socket for the effectiveness of the NUMA node.

  We have a host with 2 8-core processors with 256 GB of memory. I'm not worried about the affinity of memory. This should be as simple as the control that the 'reserve any memory comments' correct?

  Is it simpler just set up a pool of resources for cela CPU and memory? The only concern I have is it if the processor uses the same memory channels. We do not want a CPU into a socket using the channel memory of another plug for this virtual machine.

  And it's too late to go back to physics for this system.

  Eeghads! Just FYI, the processor affinity is almost never what a seller really wants, even if they think they do. I can imagine there are valid use cases, but I spoke with several vendors who recommend this, and they were all wrong.

  From what I understand in your summary, the application is sensitive to the latency of the CPU. If the physical compute capacity, actions and reservations will address the latency. Latency is the only reason why they want to set the affinity, or are there others? If there is other, know what they are, because there is a good chance to those who are also invalid reasons. The processor affinity tends to exacerbate the problems you're having with loans time CPU and can often cause latency application MORE CPU than that without it. Yes, you can set up reserves of CPU to address these issues for this particular virtual machine, but you made life more difficult for the CPU scheduler. DRS involved in the loan time CPU, which means she won't necessarily move these other virtual machines on this host, even if they are jointly stop like crazy. While we're on the subject, this virtual machine would need to be excluded from automatic DRS migration, since you cannot vMotion with the processor affinity configured. It also means the virtual machine must be powered whenever his current host goes into maintenance mode.

  In any case, verification 'reserve any memory comments' will not affect memory locality. Will just leave all the pages of virtual memory with physical memory pages (another side effect interesting is that creates the virtual machine is no longer a pagefile on the boot). If you REALLY have to set the affinity to the CPU/memory, memory affinity can be set by changing the settings of the VM, the tab "resources", select Advanced Memory, and you can configure NUMBER here. In addition, if you had already seen it, the processor affinity is configured in the tab "resources", under Advanced CPU.

  I highly recommend you challenge the seller and ask if reservations CPU are sufficient. The planner of UC is already aware NUMA. VCPUs how they ask, anyway? Unless they want to more than 8, it is unlikely to split the virtual machine.

• Toshiba A50-frequency of 106:FSB Bus and memory problem

  Hello
  I have a problem with my new Toshiba A50-106. There are Celeron M 1, 5 GHz inside. That all specifications for this processor FSB speed should be 4x100MHz and for my memory bus speed should be 2 x 133, but when I check in SiSoft Sandra 2004 I see 4x187MHz (748 MHz) FSB and the speed of the Bus of Mem 2x249MHz (4 98 MHz). I can't fix it myself, because there is no such option in the BIOS and there is no standard software from Toshiba.
  Consequence of this is the problem of the temperature of my cpu. It is on average 54 c in an idle state.
  Perhaps you have had the same problem or knows what is in him and you can help me.
  What is a temperature average of your Celeron M?

  Thank you in advance,
  Michael

  Hi michael,.

  to your first question, have you run Sandra 2004 in battery mode because in battery mode CPU manages to set the speed of the FSB and memory also bus speed!

  So, try once more on AC power mode and let me know the results.

  Also, you should check these results with different bechmarking systems because these programs work differently.

  @ temperature problem: there is problem o with 54 HP. The home page of intel, said a 125 C is the maximum and then the CPU stops automatically!

  Rudi Bye

• Bluetooth and memory card in my laptop HP 240 G3 doesn't work!

  Please... this the correct driver file, I need in my notebook for bluetooth and memory card work! I've downloaded several, but continue working... =)

  Hello:

  Your model does not include built in bluetooth network.

  The Atheros wireless network adapter is only wireless, not an adapter without wireless/bluetooth combination.

  You need this driver for the SD card reader...

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  FTP://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72086.exe

• Window Media Player.exe using 100% of CPU and memory

  I have a Pavilion dv4-2145-dx Windows 7 Ultimate SP1, 4 GB of memory. Windows Media Player.exe supports my CPU 100% usage and it is striking all my memory - 4 GB.   It started right after I set up a homegroup.

  I had to go into Admin/service and change the Startup Type to disabled for:

  • Windows Media Center Receiver Service
  • The window media services planning service
  • Windows Media Player Network Sharing Service

  I tried setting services to manual, but Windows Media Player has yet caught all the CPU and memory, he could then I disabled all the.

  I do not know how to disable homegroup and Windows Media Player services work together so I wonder if everything is always operate has designed with the homegroup and sharing my music.

  Hello

  I think this explains the problem.  The 2 entries here should be deleted, because the first will try to index all of your user profile and the second will attempt to index all of the Windows Partition.

  C:\Users\Rick

  C:\

  To remove them, click to the left of the entrance, highlight it, and then click Remove.  When these two entries have been removed, reboot the laptop and you should find that the problem has been resolved.

  Kind regards

  DP - K

• I lost recovery and I do not have disk. Help me, please!

  1. number and product name

  -HP pavilion g4-1016dx

  How can • I find my product name and number

  2 operating system installed (if applicable)

  Windows 7 Home Premium 64-bit

  3. error message (if any)

  I lost recovery and I do not have disc

  For a small fee, you can order recovery from your Support HERE page media

• Graphics update and memory for my A30 161

  My Satellite A30 161 uses 64MBRadeon and 512 MB of memory, the way I use it from the moment looks like im will need an upgrade on my chart and memory. Toshiba can this do?

  Hello

  I think that your graphics card shares its main memory with your RAM and you should be able to adjust the amount of memory allocated to your VGA card since then in the BIOS. The maximum value allowed is 128 MB and can be selected in UMA memory allocation in your BIOS settings. Note that it will have to reduce your available RAM as a result.

  HTH

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye