HP 15-n270sa: variant of the Realtek RTL8188EE for 15-n270sa
Hello
[edited by Moderator series]
Product: F5C17EA #ABU
Model: HP 15-n270sa
OS: Windows 7 64-bit
Firstly the realtek RTL8188EE is a terrible WiFi card of absolutely. Which as your conscious has had so many questions and doesn't always have a real solution.
I'm looking to replace it with another, anyone know of any options that are compatible with the laptop above?
or
There is connect a real driver that truly works with windows 7 and maintains a stable connection, does not take 15 minutes, actually connects and maintains the connection after restart or waking up?
Any help or advice would be much appreciated
Concerning
Hello:
If you want to go with one of the cards in the manual, I would go for this one...
Qualcomm Atheros QCA9565 802.11 bgn 1 x 1 Wi - Fi + adapter combo Bluetooth 4.0 (with a single antenna)
Check if your model has two antennas connected to the wireless card.
If so I would recommend one of these...
This is router Wireless N dual band...
Broadcom BCM943228HMB 802.11abgn 2 x 2 Wi - Fi + 4.0 BT Combo adapter
It would be for a router AC (or if you plan to upgrade to one):
Broadcom BCM4352 802.11ac 2 x 2 Wi - Fi and Bluetooth 4.0 combination WLAN adapt
You can probably find one or the other on Amazon.com
Tags: Notebooks
Similar Questions
-
Need help from the Realtek ALC268 for Windows XP driver
Hi all
I bought a new laptop an it was Vista installed on it.
So I installed Windows XP well. But the audio driver does not work.I downloaded the Realtek dfferent versions, but no one worked...
I've got the Realtek ALC 268 with HD Audio chipset. Anyone an idea how to solve the problem, or where I can download a driver that solves the problem?
THX, FleetAdmiral
If you use Windows XP, you need to install * KB888111 * and * KB835221 hotfix * before install driver sound!
This should help! -
HP Pavilion 17 Notebook PC: Realtek RTL8188EE adapter wifi connectivity issues
Help, please! I had bought this HP Pavilion computer with operating system Windows 8.1 and did the upgrade of Windows 10, when it came out. My wifi worked well until a few months ago. Now, I lose connectivity constantly. I searched the forums and tried everything I can find. I have the Realtek RTL8188EE 802. 11 b/g/n adapter Wi - Fi. All is well with our router, like all other electronic devices in the home are connected to the internet just fine. It is located in the same room and never had any problems connecting to the front. I drove back to 8.1 for Windows, made sure I had the latest drivers from the adapter, and then restored to older versions, tried to change minor settings on the adapter (i.e. make sure that power management area is not checked). I uninstalled the driver and removed the software, then restarted. Checked to make sure that the wireless encryption is WPA. Is there anything else I can try? I use this computer for my business and need to work. Nothing I've tried has fixed the problem.
Hi @jborgwardt,
Thanks for the reply.
Sparkles1 is absent today. I'll follow your post.
I just want to confirm if the current version of the wireless network adapter driver is 1.0.0.17 Rev.A sp68120.exe in your device manager.
Also, please run the test component in the UEFI Diagnostic Hardware for wireless module:
HP Notebook PC - detection of hardware failures (Windows, 10, 8)
Let me know if it satisfies the test of material.
Kind regards
-
In the Device Manager settings, how to fix the sign (!) beside the network controller and the Realtek drivers for the card to operate wireless? in win xp for HP slimline free?
Please indicate where to get a free package of download and installation, if necessary, with the right drivers and you please see a "how to install" because I can't possibly struggle with this more. NO COMPUTER = GRUMPY ME.
Thank you kindly,
Amber
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
Realtek RTL8188EE 802.11 b/g/n wifi adapter failed
I have a labtop HP running windows 8 and just recently... in recent days no wireless connection cannot be found. I ran the troubleshooting and these error messaages arose.
as the subject line (Realtek RTL8188EE failed
* a network cable is not plugged in correctly or may be broken.This is a laptop HP 15 (labtop)
Hello @ty3bis ,
Welcome to the HP Forums!
It is an exceptional place to find answers and information!
You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more
I understand you have lost your wireless network and when you have run the troubleshooter you received two result.
as the subject line (Realtek RTL8188EE failed
* a network cable is not plugged in correctly or may be broken.Have you tried reinstalling the wireless card?
Have you tested for hardware failure? Screening of hardware failures (Windows 8)
Here is a link for troubleshooting wireless network and Internet (Windows 8) that can also help.
You can contact HP support for help also.
Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.
The best of luck!
-
Realtek RTL8188EE 802.11bgn wifi
Buy HP Pavilion Notebook - 17-f123ds and the adapther Wireless does not query my 5 GHz network. I've done many research and cannot find all of the information that works this Realtek RTL8188EE 802.11bgnadapther. There's no sense that this model would not have this feature. I have 2 old Lenovo Thinkpads and, of course, a Samsung Galaxy S5 all use my network 5 HZ. According to the answer I can return this laptop. Any help will be greatly appreciated.
Hello:
HP consumer notebooks have very few cards dual band.
The RTL8188EE is a single band card.
You don't need to do research to understand them.
Any card wireless with a bgn suffix is a single band card.
No matter what with a suffix abgn or agn wireless card is a card dual band.
-
Pavilion 15 with Realtek rtl8188ee can't see 802.11n network
Hello
a new Pavilion 15 with the network card wireless Realtek rtl8188ee - all drivers up to date.
I have a Netgear router which is dual band and there is a network of 11g and 11n.
I can connect and use the network of 11g all very well.
But I don't even see the 11n network.
Any thoughts?
Hello:
If you mean that you cannot connect to the 5.0 GHz band, it's because the wireless RTL8188EE is a unique card band (2.4 GHz) only.
-
Hello, I am running Windows 10 64-bit Edition-Standard-Core family, previously windows 8.1 I could uninstall Beats by uninstalling the Realtek drivers, and then by reinstalling drivers realtek generic on their site, I was able to replace the Panel of Beats Audio with the Realtek HD Audio Control Panel.
When you try to do it now, Beats can reinstall itself even if I use the generic driver from Realtek... Is it possible to prevent this? Or is my only hope to sell this laptop and buy another brand?
Thanks in advance.
lemagex
Edition all the old driver sound
install the new
-
Satellite A210-183: cannot install the Realtek RTL8187B WLAN XP
Hello
I downloaded from the download section of Toshiba, the pilot: RTL8187B_5_6.1135.0625.2008_Silent_Install, but when I try to run the installer, I get the installation program has encountered a problem...
When I try to manually install the driver from the Device Manager I get the message; driver is not appropriate for this material: "the specified location does not contain ifo on your hardware.
What can I do?
Hello
I don't know about you, but maybe it has something to do with the order of poor facilities. The order of good facilities for this Satellite model is as follows:
WINDOWS XP HOME SP2
ATi Display Driver V8.401 - m 070815-052613C
CardBus Controll Driver Memory Stick 6.0.1.10 Reader /Card
Synaptics TouchPad Driver V10.0.11.1
Realtek Audio Driver
TOSHIBA software modem
Realtek LAN Driver V5.674.807.2007 cable
Realtek 802 WirelessLAN. 11a / g Driver V5.1097.718.2007
Bluetooth Stack for Windows by Toshiba
Bluetooth Monitor (Build 20070215) V3.01 + ReadMe1st
UPEK Finger Print Driver version
Chicony Camera
TOSHIBA common modules
TOSHIBA Hotkey Utility
TOSHIBA Touchpad POWER utility
TOSHIBA utilities
TOSHIBA Power Saver
... and so onHave you started the installation of all the stuff in this order? I have no experience with the Realtek drivers, but maybe it's important to install everything in order.
-
Satellite L750 - stuck on the Realtek card reader
Hello
I just got a Toshiba Satellite L750 / 00K and I turned it on for the first time. He asked about the recovery and I chose 64-bit, and then on the settings in the box. It restarted once then I left it to charge. I came back and he was stuck on the Realtek card reader. It has been like this for maybe 2 hours, I can move the mouse but nothing has changed. He said that commissioning could take some time but I don't know if something is wrong. Help, please!
Thank you
Hey Buddy,
Installation of recovery can take a very long time. In your case I'd wait a bit more.
If it helps doesn t you should try to start installing recovery again. You can do this if you access Windows Advanced Boot menu and select Repair my computer.
-
LabVIEW oop variant in the private class data
Hello
I'm new to LabVIEW OOP.
Is there a way to get a control of type variant in the 'grouping of private class data"for a class? If not, is there an alternative for handeling given variant? I use LV 2013.
Thank you.
Just, you use a control of type variant, and put in the big giant cluster. It's the same for any other data type. Is there a specific problem that you run into?
-
Error 91 - try to use the variant of the function of data
I'm running a problem when you try to use variations in my application. I have a setup of State machine that a State creates a list of tasks (cluster of tables), and then converts it to the Variant. The variant is fed into a shift register that allows me to access the list of tasks of a different State.
The problem comes when I try to use the variant of the function Data. I right click on the task cluster to create a constant and then wire to the TYPE of the variant of the function Data. I wire the variant of cluster of task to the terminal of the VARIANT. When I run the VI, I get error 91: or the possible reasons: LabVIEW: the variant data type is not compatible with the data type of wired for the input type. ».
How can I get this error if the type that I have connected to a Terminal TYPE of the Variant Data terminal is a constant created from the exact type created a variant of?
Section of the machine of the State where I wire the cluster variant:
Section of the machine of the State where I use the data out of the cluster variant:
The constant wire to the terminal of data TYPE variant was created from the cluster that is connected to the Variant type data. I don't understand how there is a type mismatch?
Is there another State between these two? I notice you have some tunnels 'Use default if unwired' coming out of the structure of your business. First of all, clear on the tunnels. Second, in cases where you do not only affect the data, the data directly from the tunnel entrance in the tunnel exit of the wire. I recommend using the tunnels linked to make it even easier on yourself.
With the default tunnels being output, your variant coming could really be empty, so the conversion fails.
-
Laptop HP 15: Realtek RTL8188E does not turn off
Have HP laptop, 15; bought with Win 8 but upgraded to Win10 earlier this year. Recently installed a number of system and driver updates from HP. One of them was for the Realtek lan wireless (driver dated 13/10/2015;
ver 2023.19.831.2015). Since that time, LAN will not turn off (light stays on) when you use Shutdown or Hibernate. A difficult start is necessary to extinguish the light of lan and restart the computer. It's a pain. I'm missing the need to change a setting somewhere or is this something that is going to require waiting for a new update for the Realtek driver?
Hello
Try disabling the startup of Windows 10 hybrid - you can do the following.
Open settings and select System. Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.
In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '. Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.
Type (or copy and paste) the following command (including spaces) and click Enter.
Shutdown /s /t 0
Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.
If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.
Kind regards
DP - K
-
Variant to the forestay to enter VI
Hello fellow developers,.
I would like to ask if anyone knows how to connect a Variant such as terminal connector for my Subvi? I can't find a control of type variant at the moment.
I used the variant data and unflatten chain and no Refnum for my Subvi.
Can someone enlighten me?
Thank you
Alan.
Sometimes when I'm not able to locate any specific control/indicator, I prefer for the function block (node) on the block diagram of the right click and select 'Create' > 'control' (or 'indicator').
-
My daughter deleted the Realtek on my Windows 7 - How to get her back?
My daughter deleted the Realtek on my Windows 7 - How to get her back?
Try to use the system restore. There should be a restore before your daughter point done uninstalling.
Choose the point just before the uninstall was made.
This should restore your PC back as it was.
Good luck to you,
UTC/GMT is 17:39 Tuesday, July 3, 2012
Maybe you are looking for
-
Tecra S10 - 'controller PCI of communication Simple' unknow device on Win 7
Hello I'm not able to install this unit. I installed a clean Windows 7 64-bit) I tried to install the driver "Intel AMT" and tried to disable AMT in the bios (has been disabled by default). As sugested in the thread following [http://forums.computers
-
Re: PX1256E-1TVH hybrid USB TV Tuner - see black screen only
HY guys,. I bought this USB to watch a free analog channel on my laptop.I installed correctly the savvy TV software; I get the channels and he finds more than 300 free TV progs.But when I look I see black screen and there is no sound for all channels
-
That means the closing blue screen problem down in WinXP? DMP attached.
Received the blue screen error and need help to interpret .dmp file. Having read the advice here and don't understand the error. DMP link here. Can someone please help? https://SkyDrive.live.com/redir.aspx?CID=5de3dc24cafcbc7c&RESID=5DE3DC24CAFCBC7C!
-
Original title: opening of the pop ups I have Vista Home version. When I connect, I get the pop - ups following: 1.) _Windows sidebar Settings.ini. is used by another system. Recorder 2.) WARNING: Logger! Initialize is not yet call... The log file c
-
Brother laser printer worked fine, now does not print. ????
The strange thing is that it printed fine a few days ago. I don't think that I've changed something such as the registry or Services.msc and the print spooler has started in the Services. I try to print a test page and it comes is in the queue and