Satellite L750 - stuck on the Realtek card reader
Hello
I just got a Toshiba Satellite L750 / 00K and I turned it on for the first time. He asked about the recovery and I chose 64-bit, and then on the settings in the box. It restarted once then I left it to charge. I came back and he was stuck on the Realtek card reader. It has been like this for maybe 2 hours, I can move the mouse but nothing has changed. He said that commissioning could take some time but I don't know if something is wrong. Help, please!
Thank you
Hey Buddy,
Installation of recovery can take a very long time. In your case I'd wait a bit more.
If it helps doesn t you should try to start installing recovery again. You can do this if you access Windows Advanced Boot menu and select Repair my computer.
Tags: Toshiba
Similar Questions
-
Satellite M40 - SD card stuck in the SD card reader
Hello!
I have a Satellite M40 and today I had the bad idea to use the Toshiba SD card reader.
I inserted the card into the slot and he's going to profoundly inside. Try to get only back further by pushing.
Now the cards is aprox. 2cm inside the slot and there is no way to get it out.
This must be a joke. Please tell me where the secret button should get out of this card here. I let it go, really...
Thank you
FritzHello
As much as I know Satellite M40 has no SD card but media slot and it supports various media cards. Of course, you can not use all the cards available on the market but only supported formats.
Zim wrote very good explanation of how it works. Of course, with compatible cards only. Issue described can't happen with a SD card. It is too big and may not come 2 cm inside the slot.
I'm afraid that you have used the mini SD card. Am I right about that?
This card cannot be used without an appropriate adapter.Bad thing is there is no secret button. :(
-
Satellite M70-375: where to find the SD card reader driver?
Where can I find the drivers for the SD card reader? It is not in the list of all the drivers of the M70 series.
I checked the s information about this device and it seems that the Satellite M70-375 has a number PSM70E-xxx.
First you must choose the category good pilot because there are two sets of Satellite M70.
In addition there is no own available SD card driver. You must install the driver cardbus.
This driver is also responsible for the use of the SD card. -
My Satellite A100 does not support SDHC cards with the internal card reader
Hello
My Satellite A100 can't stand my sandisk 4 GB SDHC.
'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.is there a software solution?
regrads,
ItockI don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.
I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.
-
TouchSmart 520: update driver for the sd card reader is not available
Recently updated for Windows 10 and since then had to install several new drivers. Last attempt is for the sd card reader driver. Same error comes back constantly, "HP is experiencing difficulties, please try again later". Day 3 same error. I talked to my son-in-law who is a COMPUTER expert and he warns of the use of other than original manufacturers drivers, so I'm stuck, zusammenklappbar to transfer my photos from sd card on my computer. When I called HP support, I am told that they can help for a one time fee $50, something I'm not willing to do, I'll buy another computer before going this route
Hello:
It is not not a 3rd party driver.
There is no driver W10 from HP for your PC.
The reader of card on your PC was manufactured by Realtek, so that they provide the drivers for HP.
It is a universal driver that works on all card readers.
If you're skeptical, then see if this W10 card reader driver HP works. It can not, because it can be for different model Realtek card readers that your PC has.
-
Satellite M100 (PSMA0E) - Driver for SD card reader
Hello.
I have a Toshiba Satellite M100 PSMA0E. I installed win XP and does not recognize the SD card reader. The site Web of Toshiba is not the pilot. How can I fix it? I'm waiting for your answers.
Thank you
Hello
I checked the Web from Toshiba site and for your model M100 (PSMA0E) it is only a Vista driver available for Flash Media reader.
But I founded a driver XP for Satellite M100 (PSMA1E) I think that models are similar, and you should try this one:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversCheck this box!
-
Hello I would appreciate help!
Since download Windows 10 card on the side of the computer reader will download any pictures.
Rose from 8.1 to Windows 10 Windows. Card gives Reader 2 Bell Rings when the card is inserted and 2 Bell Rings when removed and not pictures. It worked fine on 8.1.
This is an old HP Pavilion about 2 to 3 years. Not sure if 32 or 64 bits.
That would really grateful for the help. Thank you.
Hello:
See if the W10 Realtek card reader driver from the link below solves the problem.
You want the first driver on the list.
-
SD card does not work in on my Satellite A100-163 5-in-1 card reader
Hello
I recently bought a 1 GB SD card and tried to plug it into my A100-163 built-in 5-in-1 card reader. Nothing appears in my computer. I tried to go to the Device Manager and, under "drives" "Secure Digital Storage Device" with a bit of yellow! Select this option. I tried updating the driver Module SD, but whenever I do that the installer comes up with an error, basically saying he can find SD Secure Module.msi. He tries to find in a dark temp folder that involves me Installer is not extracted properly.
Can someone help me read my SD card? Help, please!
UPDATE: on the occasion of the strange, it appears in my computer as "Secure Digital Storage Device. When I double click on it, it says:
"E:\ is not accessible. The request cannot be performed because of an i/o device error."
Thank you.
Mike.
Post edited by: toto8462
Hello Mike
One thing confuses me. If the unit has the multi card reader factory settings must be configured correctly. You use your own installation of the OS?
In any case, try to remove device from digital storage secure from Device Manager, then restart the device.
-
8460p: keep the smart card reader attached, even if the card is removed
HP EliteBook 8460p
Win 7 Pro 64-bit
When a smart card is inserted, you are able to see your smart card reader in Device Manager. When you remove your card chip, the chip card reader disappears in Device Manager. Is it possible to always keep the smart card reader attached?
According to the BIOS version (F.22) will there is a fix where you can set the power state of the smart card reader:
'- Fixes an issue where the setup of BIOS (F10) does not display the power of smart card Options once the system is restarted. -Fixes an issue where rebooting the system (reboot) is slow after the modem is turned off in the configuration of the BIOS (F10). »
But this isn't the case to find.
Any suggestions?
Concerning
F27 BIOS and the new card reader is needed to solve this problem.
old player = v1.20
new player = v1.21
/paasen
-
Memory card not seen by Windows XP computer using the USB card reader portable
I use XP SP2 and have recently had a problem where my laptop does not recognize a card of memory a camera when the USB card reader is connected. It automatically launch an Adobe image management application, but I think that the operating system would still see the USB card reader.
Hello BSW58,
Thank you for your message. We will try to take a look at your AutoPlay settings.
Plug your camera card.
Conclusion Adobe once it opened.
Click 'Start' > click 'my computer '.
Right click on your card > select ' Autoplay > Adobe is listed as default application? If so, you can change it here.Please let us know if it did or did not help to solve your problem.
Soon Jason Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader. Someone know whey and how to fix it? Thank you
Run Windows Update - it may install drivers that does not get installed on Windows 7 home.
If this does not help, look for Windows 7 drivers for this device on the Sony web site.
-
My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?
Hello
I see nothing unusual, except that there should be a "0001", or even "0002"...
When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...
Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.
-
Satellite P10 - after installing XP, the SD card reader does not exist
I formatted my Satellite P10 and complete nine with XP SP1 installed. Since that time the integrated SD card reader no longer exists in the system (when I insert an SD card it doesn't work). Is this a problem with a driver or what can be the problem?
Before formatting, it's normal. Pleas explain easily. I'm not a professional user.
Hello
What drive did you use to reinstall Windows XP? If you use the Toshiba recovery disc are all drivers and pre-installed tools because the disc contains a picture of the factory settings.
In your case, I would try to install the latest driver for the European driver of Toshiba download page card reader. Maybe it's just a driver problem you s wrote:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversI m wondering that you only use the SP1 for XP. SP2 or SP3 new contains a lot of important security updates. I recommend you to update your XP version.
Welcome them
-
Satellite L670-DX1 - after the installation of SP1 cannot use the memory card reader
Hello
Since I upgraded my Satellite L670-DX1 of Win7 64 bit to Win7 64-bit SP1 (2 days ago) I can't use my memory card reader, he always says it is a bad card and I should reformat the card with any card.
Does anyone have a similar problem or better yet a solution for me?
Greetings
You have installed SP1 using Windows update option?
Have you tried to roll back the OS to an earlier time to see if the card reader is working properly again?Have you tried reinstalling the driver of the card reader?
-
Satellite A200-1 TB - need driver card reader for Vista 64-bit
Hi all
I just bought a new laptop Satellite A200-1 TB and I installed Windows Vista Ultimate 64-bit (x 64) on it but, unfortunately, it did not the mass storage driver (the driver memory card reader).
Can anyone know where I can download it? I tried on the Toshiba driver page and I couldn't find.
Thank you.
Download this file:
[TI Card Reader Driver for Windows Vista/XP 2.0.0.7 | http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]
but do not install it via the installer. Unzip using winzip/winrar/7zip and manually update the driver in device pointing to the Directory Manager
+ unpacked_archive_dir + \Windows\tiinst\Vista64
works fine for me
Maybe you are looking for
-
I made a video on the iPhone 5 is and it reads at high speed?
I made a video on the iPhone 5 is and it reads at high speed?
-
5200-801: where can I find the bios editing application?
Hellobecause of the businness implementations I've migrated to Windows Xp PRO. I formatted and reinstalled the intire system. All right, but I can't change boot preferences settings. The Toshiba Control Panel is not integrate more. I installed all th
-
Where can I buy the new ATI Radeon 3650 for Satellite A300D mobility?
Hi all very simple question, where can I buy new unused mobility graphics card Ati Radeon 3650 for model toshiba A300D - 16Q, omg help me pls, thanks ;)))
-
HP Probook 6360 b: Hp Probook 6360 b base system device driver
Hi, in my device under other devices Manager his watch that miss me the driver of the basic system for my Probook 6360 b, when I try to install via the internet search, it finds but installion driver fails, and when I try the cd that came with the co
-
Uploaded a few photos off the G12 and then charged the battery and when I reinstalled the battery I could see pictures, but when I switch them to camera mode I have brief purple lines then black. And I'm not able to take pictures. Help!