HP 15-r043tu notes (J6M13PA #UUF): book 15 Hp Wireless notes, blue tooth and Chip set driver for windows

I bought HP 15-r043tu notebook with Free back.

I reinstalled windows 7 (on Installer Clean)

I try to install the driver software wireless and others that link to Hp support for windows 7

http://support.HP.com/us-en/drivers/selfservice/HP-15-R000-notebook-PC-series/6875200/model/7280264#...

But the driver do not work for the WiFi, blutooth, chipset and storage

Error is that "the program is installed correctly" and the "Re-install the program with the recommended setting.

Product model number is: J6M13PA #UUF

Suite driver are working fine since the same link:

-Audio

-Graphics card

-LAN (NIC)

Please help me on this, otherwise I think I bought a machine to qrong.

Thank you

Hello:

You can probably use the driver chipset Intel directly.  The second file on the list, it's self installation of the file.

https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-

Chipset driver will install the storage controller driver too.

I don't know why you'd want software RST and the driver, but if you do, you can also try the last being from Intel.

3rd on the list file will install the drivers and software.

https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

Wireless:

http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_131223_1

Bluetooth:

http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

Tags: Notebooks

Similar Questions

  • Pavilion 15ab202tx: why I can not install hp pavilion 15 ab202tx driver for windows 7 64 bit

    why I can't install hp pavilion 15 ab202tx driver for windows 7 64 bit. For the most part not completed the pilot usb and network for

    LAN & Wlan.

    HP has posted only Windows 10 drivers for this model. @Paul_Tikkanen we can help to find the drivers for Windows 7?

  • Can not find the ACPI driver for windows 8.1 for g40 - 80

    I can't find the ACPI driver for lenovo g40-80. I tried the win10 version, but it did not work.

    Could someone kindly help?

    To get the ACPI driver for Windows 8.1, you will need to install OneKey Optimizer - link

  • Could not import the music downloaded from iTunes for Windows Movie Maker.

    Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

    Hello
     
    Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
     
    Import video, photos and audio on Windows Movie Maker
    A problem of importing files into Windows Movie Maker
     
    Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
    You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
    For more information, see the link:
    Hope this information is useful.
  • Satellite M30X: DVD - RAM not visible driver for Windows XP Home edition

    Hello

    Satellite M30X-113, I suffered a big problem after uninstalling INCD software. I lost connection with my DVD - RAM burner, the widow could not see. I installed the driver from the site web of Toshiba and installed, but no way.

    I also tried to uninstall the driver and install it again, but no way, still it gave me an error code 39 ad, which means failure or corrupted files. Do I need to install again the window or what can help me? My laptop is new, just 1 month.

    Hello

    Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;314060.

    Good bye

  • LaserJet 1020 driver for Windows 7 x 64 does not!

    Hello. I have the problem. I recently installed Windows 7 x 64, and when I tried to install the driver for my LaserJet 1020 of the site, an error appeared.

    First of all, when I launched the driver installation program, I have subscribed to the license agreement and proceeded. Than, in the loading bar appears, it came with 3 branches of division inside and above text was as "preinstall the driver files. Then suddenly, for a fraction of second text 'Copy of the files on the hard drive' appeared again once «Preinstallation of the driver...» "and he appeared again for less than a second and again and again... "That, after a few times, it's just crushed, with the Windows message"Printer Software Installer"does not work".

    And one more: in Program Files-> HP folder there is a lot of driver files (which seem to not work) and another file with the same file and folder inside HP HP... Recurrence, I think.

    So, what should I do? I can't use my printer for a long time because of this driver!

    I am have not spoken English for a while, so if I explained something strange, ask, I'll try to explain better =)

    Which is awesome? I'm awesome! ^_^

    I used the Russian version of the pilot, worked flawlessly =)

    Take it from here. Happy, if I could help it =)

    http://ftp.HP.com/pub/softlib/software11/COL22237/bi-58689-4/lj1020_1022-HB-PNP-Win64-ru.exe

  • HP 15-p097tx: Synaptics TouchPad Driver for Windows 7 64 bit (sp69001 and sp67269) does not work

    Hello

    I just baught HP Pavilian 15-p097tx, which came with Windows 8.1. I like not this OS so I installed windows 7 64-bit Ultimate and after installation of the hp Synaptics TouchPad Driver (sp69001 and sp67269) support, the system Web site goes crazy, I mean windows deselect automatically and when I try to access the touchpad from the Control Panel options the system hangs. Help, please

    Thank you.

    Hi @SushmitMazumdar ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p097tx and the problems with the driver for the Synaptics TouchPad. If you uninstall the driver and restart the laptop, it will install automatically the best driver.

    Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

    I hope this helps.

    Thank you.

  • Media Player does not start after loading Media Feature Pack for Windows 7 N

    I have installed Windows 7 Ultimate N and wanted Media Player 12, so I followed the instructions and downloaded and installed the Media Feature Pack for Windows 7 N and had no problems with the update.  When I start Media Player I get an error message that says "Windows Media Player is not installed correctly and must be reinstalled.  You want to install the player from the Microsoft Web site? ».

    I'm running x 64 and double checked the update I downloaded was for x 64.  I ran a scan SFC and he returned 100% complete without any problems.  I try next?

    Transfer your question in this forum, please: http://social.answers.microsoft.com/Forums/en-US/w7music/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • my wireless does not work when I download the update for Windows Vista (KB2753842) security

    After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally

    the fact. When I used a LAN cable I internet connection.
    When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.
    The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.
    Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?
    Thank you.
    Roy

    Thank you very much for your answer.

    I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.

    Kind regards

    Roy.

    Hi royhorrobin,

    Please report the problem to the Microsoft Community Forum.
    We will help you solve the problem.
     
    1. What is the brand and model of the computer?
    2. do you get an error message?
     
     
    We would like to tell you that this is a critical update...
    Find information here:

    Here are some steps that you can follow:
     
    Method 1:
    Step 1: Restore the system to the United Nations-isntall the software update.
    Refer
    What is system restore?
     
    Step 2: Put the computer to boot, with warning...
    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
    Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
     
    Step 3: Download and install the update manually to the clean boot.

    Method 2:

    Try to update the Wireless driver and check to see if the same problem happens.

    a. click on start
    b. right click on computer
    c. click Properties
    d. click on Device Manager on the left hand side

    e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
    f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, see:


    Method 3:
    Also, try the steps from the link below:
     
    Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.
  • Why didn't - it not the center of solutions that installs for Windows 8 on a HP Officejet 4500 HP?

    I uninstalled and reinstalled the update of the software of HP OJ_AIO_4500_G510n-z_Full_Win_WW_140_408 for Windows 8.  The HP Solution Center will not complete installation.  I went through the installation process 16 times in all conditions.  Same results, Center solutions HP shows and error that installation was not complete.

    I bet that the first installation has no uninstall completely clean. There may be something stuck in the registry that prevents the installation ended as it should. Try using the brush included in the CD or download.

    Starting a download:
    1. run the disk cleanup on your computer
    2. download and run the software and the drivers below.
    Driver and HP Officejet Full Feature software
    3. once the download is done retrieve, cancel the download.
    4. press on the Windows key + R to bring up the run window.
    5. type % temp % in the field of race
    6. Locate and open the folder starting with 7z (example: 7zS2356)
    7 open the Util folder
    8 open the CCC folder
    9. run the L4.bat uninstall_ for computers not HP. For HP computers, run the Uninstall_L3.bat
    10. once the uninstall is complete, restart the computer
    11. install an Accessories\ System Tools Disk Cleanup
    12. download and install the latest version of Adobe flash player
    http://goo.GL/R1hy
    13 use this tool to clean the system and the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
    http://goo.GL/tbpvF
    14 download the drivers and full software features
    Driver and HP Officejet Full Feature software
    15. run the download to reinstall the printer

  • Business Inkjet 2300 driver for Windows 7, Windows Update does not work

    Bought an inkjet 2300 for my office, but the driver does not work for Windows 7 (64) and despite what all the forums and guides say, Windows Update don't shoot the pilot.

    There must be a way to get the driver directly - any help would be much appreciated. I don't want to take the camera for what seems like it would be an easily solved problem.

    Thank you!!

    Hello

    The drivers should be downloaded automatically,

    You can also download the drivers caraa of the Microsoft Update catalog from the following link:

    Most probably the 3rd result should work on your operating system, depands on your proccessor type, for any SLA question try the result 5:

    http://catalog.update.Microsoft.com/v7/site/search.aspx?q=inkjet%202300

    Once download you the drivers, you can follow the document below to extract and install via the add a printer dialog box:

    http://support.Microsoft.com/kb/323166

    Shlomi

  • OfficeJet 7210 printing preferences does not work with the driver for Windows 8

    I have successfully installed the driver of Windows 8 (64 bit) full of features.  Printer copy, scan, fax and print from the computer.  However, I'm no longer able to print in grayscale, select a print quality (fast draft, project, etc.) and choose the paper type on the printer menu shortcuts in the printing preferences.

    In the box "what do I want?" and choose fast/economical printing, the selections above will appear in the list of options, but when you go to select an option in the drop-down lists that can empty al.

    You probably work with a more basic driver in Windows 8, and this is why you are not able to use these features. I would check to see if there is another driver that will allow you to use the. Here's a message written by a colleague who deals with how you can do this:

    http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

    Let me know how it goes and I'll get right back with you!
  • HP Laserjet 4350dtn-can not find the driver or install the right driver for Window 7 Pro or Windows XP Pro

    I was able to use a network 4250dtn printer, but can not connect another 4350dtn to computers with Windows 7 Pro or Windows XP Pro.

    I bought a new Lenovo desktop computer and it cannot find/install the correct driver for this printer refurbished.

    Help, please. Thank you. The Hoang

    Hello

    It's correspondence, that HP has HP Laserjet 4350dtn

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=412170&lang=en&lang=en&cc=us&cc=us

    See you soon.

  • Need to upgrade Windows Vista to Windows 7, but printer does not have a driver for Windows 7.

    Hi, I have windows vista running on my system and I'm going to upgrade to windows 7, but my Dell 924 All In One printer is not compatiable with windows 7 and I would like to know how I can run this printer with 7. I checked Dell and did not find anything and I wonder if I can upgrade to 7 and save my vista drivers so I can use my printer, any help would be thank you very much

    Moved from Vista to install, upgrade and activate Forum.

    Donald

    If it's not compatible, it is not possible but you can try to install drivers vista in "compatibility" mode

    To install in compatibility mode do the following:

    Click with the right button on the installer > properties > compatibility > choose OS

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

  • Visioneer OneTouch 8700 USB Scanner Driver for Windows XP SP1 installed SP 2 compatibility mode - does not

    My machine is upgraded from XP SP2 to Windows 7. Support was interrupted by the manufacturer scanner after the pilot XP SP1.   Update of Windows in my system is always sur-installe updates automatically.   The scanner driver has been downloaded from the MFRS. ' site and installed in my computer Windows 7 in "compatibility mode for XP SP2. The scanner icon in my system tray.   To make a physical connection to my system, I get error that it can not be connected or cannot be configured.   I have two USB ports of work attached to the Mo (Chinese-"Weibu") and two USB PCI card is compatible with XP and earlier versions (as shown on the box, no mention of Windows 7).   I tried all these ports, always the scanner does not connect to my system.   In addition, my device manager under USB controllers, shows the exclamation marks in yellow triangles against two elements of the same name: "VIA Rev 5 or later USB Universal Host Controller.   I uninstalled these 2 elements and restarted my system several times, without success.   At each reboot, the yellow marks disappear but soon reappear.  But the scanner worked perfectly fine in my old XP SP 2 system before moving on to Windows 7 and before installing the USB PCI card.

    Is there a solution to this problem up the old USB devices and running in the Windows 7 environment?   (I have a very old IBM PC Camera too that works well in my old XP system, but not yet tried in the current system, even if the driver has been installed).

    If finally I am not able to use the scanner under Windows 7, I reluctantly get Windows XP reinstalled on another drive and boot into it just to be able to use the scanner which is functioning perfectly.

    I am a person of 78 years and enjoy using and experimenting with my PC, which has become an addiction for me.

    Thank you.

    You can buy a copy of XP that would probably cost more to replace the scanner and now is not the right time to install XP anyway.

    Your webcam is a lost cause. Compatibility mode has been designed to work for older programs, and Microsoft does not recommend to use it to install the device drivers. I have no idea why some here suggest a possibility...

Maybe you are looking for

  • Beta of MacOS left still getting update

    I followed the steps to leave the beta version of Mac OS that is listed on Apple's beta site, but my App Store shows the new beta of the pubis as a download available. I did a clean install and restored my data from a time machine backup, but the App

  • Cover photo

    Hello is it possible to choose a still image as an image of the cover for a completed film? At the moment it seems to randomly select a photo, I do not know how, but I'd like to have a specific image as the cover of the movie. How do I do that? Thank

  • bookmarks in Safari are not synchronized

    I want to synchronize the bookmarks from my macbook to iPhone, but it did not work. Then I tried to delete all my favorites in my macbook and iPhone, but the record are reload after I deleted several times. I also tried uncheck "safari" iCloud synchr

  • The mouse to stop that rises to the top of the page when I scroll to the bottom of the page

    How can I get my mouse to stop that rises to the top of the page when I'm scrolling down the page? my mouse

  • setPreferredTransportTypes for the LocationProvider

    Is there a way to setPreferredTransportTypes for the LocationProvider in 5.0?  I have problems with the connections on the company's intranet.