HP 1606. Flashing indicating courses of toner.

Similar Questions

• Satellite Pro L500: amber flashing indicator - battery won't charge

  When power charge light blinks yellow.
  Battery does not charge and if the battery has been removed the laptop stops.

  When this problem does not occur.

  In addition, when the power cord is removed, battery charge for a few moments then yellow flashing lights and load stops. When the stop, the battery charges normal and 100% charged battery gives almost 4 hours of time.

  Can you please guide on the problem. Is the power supply problem? or the battery? or the card mother/material?

  How to check the problem?

  It seems that you already posted a similar topic topic with your laptop a few years ago.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63225

  In the first case, it seems that your battery was the troublemaker.

  You are talking about charging light. I m not very well what LED it should be.
  There are 5 LEDs - from left: DC IN / power / battery / HDD, ODD / Bridge Media Slot

  The first DC IN indicator lights green when power is form adapter correctly provided HQ. However, if the output voltage of the AC adapter is abnormal or if power outages computers, this LED will turn off.

  The second left power led lights green when the laptop is turned on. If turn you the phone mode standby, this indicator flashes orange.

  The third battery indicator show the conditions of the accusation of pulp. Green indicates that the battery is fully charged, orange indicates the battery is charging and orange blinking indicates a low battery level.

  Question:
  Are you able to turn on the unit without the battery, but using only an adapter connected?
  Usually, this should be possible even if the battery isn't inserted.

• Qosmio G20 - 139 flashing indicator power DC only used

  Qosmio G20 139
  System does not boot, gives a flashing orange DC power indicator only.

  No other indicator.
  Seems to be a code. If I read gives 332
  Battery is fully charged and tried more than one power supply.

  Checked the voltage on the inputs MB seems OK
  Have you tried all the combinations of battery and network combinations but nothing changes.

  Hmm... looks like a hardware problem on the mobo...
  Check the memory sticks.
  Remove one and try to power the unit using a module only.
  You should check both with different combinations means you should check also the two memory slots.

  My computer laptop didn t start because of the defective module.
  However, if this does not help, then you will need contact a local technician because the guy could locate the defective part.
  But I think it could be a motherboard problem, which means that the new Council would be necessary and this can be very expensive.

• How can we change the warm tone of the retina face before Flash in a colder tone?

  I'm Asian, and everybody knows we have a yellow complexion. Whenever I take a picture using the front cam, I find myself always looking like a pumpkin due to the warm tone of the lightning. If there is a setting that can change the tone of the lightning in a cooler, it would be a great feature. An example would be Snapchat. He used to have a white flash, but now he has the right to second and third warm tone flash after the first white flash of Snapchat. It isn't even a setting to prevent the flash of retina after the first white flash in Snapchat. On behalf of Asian, I hope that you consider not only the flayed fair.

  Unfortunately, set the tone of the flash is not currently a feature on the iPhone. You can directly send the suggestion to Apple to the: http://www.apple.com/feedback

• Flash Player playing multiple tones at the same time... even when the browser is closed

  I recently updated my Flash drive to 11.3 (latest version). When I go to a site that uses Flash (YouTube, for example), I'll start the video and then 10 seconds later, I get multiple tones at the same time. They all look like advertising, or TV stations. Even when I close my browser, the sound continues. When I opened my sound mixer, it is a "program" listed in "winrscmde", who plays both audio channels. When I go to the Task Manager, "winrscmde" presents itself as a svchost.exe * 32. When I stop this service the sound stops. It will resume again when I access a flash site. When I uninstall Flash Player 11.3, it stops.

  I am running Windows 7-64 bit with latest updates. THAT IS TO SAY 9.0.8112.16421

  Any help would be appreciated.

  Well, I think I solved the problem.

  I found this topic:

  http://www.bleepingcomputer.com/forums/topic442928.html

  On the second post down, the poster recommended download killer TDS winrscmde.exe is disquised as svchhost.exe in the \windows\system32 folder (you click on 'Properties', then the 'Détails' tab and check the original file name... If it is false, it will say winrscmde.exe under the original name).

  I also ran the program aswMBR as well as FixTDSS (http://www.symantec.com/content/en/us/global/removal_tool/threat_writeups/FixTDSS.exe).

  That seems to fix the problem. Just reinstalled Flash and do not get the same questions. The svchost.exe in the \windows\system32 folder is legitimate!

  Hope this helps someone else with the same problem.

• Flash video course

  Any good video course to learn Flash programming? (In fact the action script).

  Thank you.

  gotoandlearn.com has some.

• M553: Flashing indicator waiting after that job is finsihed

  HP Color Laser Enterprise M553

  After the print job is finsihed waiting symbol flashes and the

  'Treatment joib tray x (1 or 2)' is displayed.  This prevent me to start a new job at different plateau.

  Displays Windows devices & printers for this printer show that no print job in the queue or in the process.

  If I turn the printer off and turn it back on I can do what I wanted to do.

  There are no jobs in the queue of processes by poster printer Windows, but the problem is not re-appeared so he must have had a stroke of luck. Thanks for the reply.

  Thurman S.

• Flashing indicating the number of unread emails variable

  Hi all

  would we beable to help me with a small flash variable. not sure how this works, just been asked to do so, doh!

  What I'm trying to do.
  I have an icon of e-mail when there are new messages would indicate the number of emails that are unread. It is simply a number, which indicates how many unread messages

  We pass in the number of unread messages in the flash as a URL query string object.

  
  would we beable to explain how this is done with an example script AS2, or direct me to any technote

  Thanks a lot for your help

  * How or where the case may be, I make ad link to the url that will pass the variable? **

  a.) you to do this in the HTML file by using the Flash object, as shown in the sample file.

  (b.), can you yust directly, call the Flash animation with an HTML Flash object.

  In an HTML file, you create a hyperlink, like this:

  Click me

  creating a textlink in HTML.

  (c.) in Flash you can call HTML using the getURL() function

  Create a button.

  mybutton.onPress = function () {}

  getURL("example.swf?myvariable=999");

  }

• Received a flashing alarm indicating that I had a virus on my MacBook pro.  Could not get rid of it, until I did a hard reboot.  Deemed scan of Malware for Mac software?  All this experience?

  I just got an alarm flashing indicating that I had a virus on my MacBook pro.  Could not get rid of it, until I did a hard reboot.  Deemed scan of Malware for Mac software?  All this experience?

  These alarms are generally scam popups loaded from the Internet and is not caused by malicious software, but you should always look for other odd behavior or unexplained slowness.

  (140573)

• Flash player and excessive popups

  Yes, I suffered once flash player based ads tons of pop-up ads opening so I put the flash drive to ask for activation, solved my problem... BUT I managed to press on "Allow and remember" instead of just "now allows', so my question is, where do I find the list with sites that do not have to ask permission? As I am now plagued by excessive popups once more... I ran the malware and Antivirus scans, nor showed no sign of finding all of the files associated with the ads.

  When Flash Player (or any other plugin) is running, there is an icon on the far left of the address bar that looks like a LEGO. Click on it and it will tell you what plug-ins are currently running on this specific site. From there, you can block the plug-in, now, allow or allow and remember.

• Problems with mail and Safari re Adobe Flash

  I have a MacPro retinal mid 2012 and spin Yosemite 10.10.5.  Two or three days I had a popup on Safari re Adobe Flash is more [work] when I was in the middle of something. I just was I there to make it out of the way. There is an installation of Adobe Flash Player in my utility file manager, but nothing else. Since then, I've been doing almost no mail - usually get account notices and information bulletins, etc. - and Safari does not display a game that I play often. Opens its site, but the game is not. Checked preferences; they look correct. A ran DiskUtility check / repair. Two points related to the Safari have not been repaired after three attempts. Also, ran two Virus checkers. 9.1.1 Safari and Mail 8.2. There is no message re updated or on Flash - of course, I can't receive them. Anyone know if it is related to Google and what should I do about it? Help please.

  Uninstall and reinstall Adobe flash Player.

  1 uninstall Adobe Flash Player:

  Make sure that this step 2.9 is not ignored.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Mac-OS.html

  2 reinstall Adobe Flash Player.

  https://get3.Adobe.com/flashplayer/update/OSX/

  3. allow Plug-ins

  Safari > Preferences > Security

  Internet Plug-ins > "allow plug-ins".

  Activate it.

  Search for Adware.

  Run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select 'open '.

  Select a problem from the menu popup box "Choose a problem", then "Start EtreCheck" in the dialog box.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• System hangs at a black screen with cursor flashing during startup

  Original title: Hp compaq presario cq60 with Windows vista, is unable to start windows, crashes with indicator flashing in the top left corner after startup messages

  I have a Hp compaq presario cq60 with Windows vista, whenever I turn it on it will fail to start windows, it passes through the boot screen and then after that it crashes just with a flashing indicator in the upper left after all the 3rd reset and press F8 to enter the boot options, I chose the press and enter last known good configuration and it works the problem is that I have to continue to do so every time. How to solve the problem

  Hi karltoet,

  Follow all the troubleshooting steps listed in the items listed below:

  What to do if Windows does not start correctly

  How can I fix a startup (startup)?

  What are the system recovery options in Windows Vista?

• Keith General, 'Enable Flash on Nexus Tablet'

  How can I activate Flash on Nexus Tablet?

  Thank you

  Keith

  Adobe support dropped for Flash Player on Android a few years ago.  There are mechanisms for side-loading Flash Player, but the latest published version is missing from the years of security updates and your power is in danger to a malware infection.

  The only good solution I know right now is that browser, which makes the Flash on the process server and broadcasts the result on the device.  This gives you access to a Flash Player course without all of the sketchy stuff that goes along with side loading and one old version running.

  http://www.puffinbrowser.com

• Edited in Camera Raw indicator missing with Adobe Bridge CS6, Mountain Lion

  Hello

  I have always used bridge for many years to change my photo in RAW. last week I just moved to Mac from the PC.

  Usually, when I'm on PC, after I edited my RAW file using Camera RAW 6.5, usually in the right corner of the thumbnail, he would show flashing indicating that the RAW file has been edited.

  But the flag is not how Mac OS. Y at - it an option for re - turn on who? The indicator help really make the difference between RAW and JPEG files

  Thank you in advance,

  Best regards

  Lucas

  Right on the button!

  Command-T activates / deactivates the 'display only thumbnails' menu item (View menu), and the screenshots in post #3 prove that the OP working in this mode.

  Not a problem at all.  PEBKAC, error, also known as the name of the user.

• Galaxy Tablet 10.1 / Android Honeycomb 3.1 will work course Captivate?

  Hello

  Does anyone know if the Samsung Galaxy with Android Honeycomb OS 3.1 10.1 tablet runs Flash Captivate courses?

  I see information about Flash animations, but he will manage the interactive flash courses?

  Thank you

  Dave

  Hi Dave, it does of course. The new Galaxy Tab 10.1 that comes with Honeycomb 3.1 and also with Flash Player 10.3 is able to preserve all interactivity in a Captivate course, including take quizzes and submitting the results to any LMS and Acrobat.com.

  You can watch a video I posted on my Blog, where I show that resembles the experience on a Motorola Xoom, which has the same version of Flash Player that the Galaxy Tab 10.1 and OS. The video can be found here: t-via-the-flash-player-10-2-video/ http://rjacquez.com/check-out-adobe-captivate-elearning-content-on-the-motorola-xoom-table

  Thank you

  RJ Jacquez

  Adobe eLearning evangelist