HP 2 600: Cannot install windows 7 on 600 new G2

Similar Questions

• Portege M400 - cannot install Windows XP on the new HARD drive

  Hello here is my problem,

  I bought an older Portegre M400 E, without a HARD drive. So I buy a new Samsung 400 GB. I looked in the Bios (ACPI BIOS Version 3.40) and it is ok. He shows me the HARD drive with built in Assign LD - 0 status ONLINE, 400 GB size so it seems to be nice. Changed the matrix Raid, described in the manual, in condition to create 1Raid-0
  So, I want to boot from the Windows XP CD, not recovering my own.

  Windows open to the top and after a short period, the installation ends with the message that it is not any HARD drive. This I try sometimes :-( Hope someone can help me.
  Do not forget that I didn't have any HARD disk with the dates of the laptop.

  Thank you Carsten
  (Sorry my English is not so good Im from the Germany)

  Wilkommen!

  > Changed the matrix Raid, described in the manual, in condition to create 1Raid-0

  I don't know much about your model, but I think that something wrong with the raid in the Bios settings. What other options are available in the Bios for the State of the hard drive? I found the RAID driver on the Toshiba driver page. It is possible, that you can integrate in with a program called nlite Windows installation disc or install Windows as in compatibility mode, and install the Raid driver. then

• Cannot install Windows Server on the new server Poweredge T110 II 2012

  HI - just took delivery of my new Dell PowerEdge T110 II with two 1 TB drives in RAID 1, but without any operating system installed.  On the Windows Server 2012 Standard edition installation, the installation routine is unable to detect readers when it comes to choosing the installation location.  I can 'find the pilots', but on the insertion of the Dell supplied DVD, it does not find everything.  I changed different settings, rebooted and tried several times without success.  Entering the system at boot configuration screens, I can clearly see my 2 x 931GB disks and the virtual drives installed on them (I even removed the implementation of RAID and the virtual drives at some point to see if that was the problem).  Any help appreciated.  Regards, Barry

  Hello Barry

  You should have received a disc entitled management of system and Documentation Tools. If you start on this DVD, it takes an option to install an operating system. Follow the on-screen instructions and it should load the required drivers. If this does not work then let me know what RAID controller you have.

  Thank you

• Cannot install Windows 8 with the new drive, because the key will not

  I just rebuilt a 64-bit pc. I had windows 7 on it and decided to do a clean install of windows 8. Bought a version OEM from Amazon yesterday. Arrived today and the disc was in double sealed package of Microsoft Corporation.  The package comes with the key in very small print on the back that I had to read with a magnifying glass. This key is not accepted during the installation of the software. I checked that it was OK and I tried several times but the key has not been accepted. What should I do now?

  Hello

  I assume you are using the disk that came with the OEM key to install your system? If you are then the only people who can help you is the team of Microsoft License, you can contact them here:

  The United States customer service phone number is:
  1-800-Microsoft (642-7676)

  If you need a different language, please see this list http://support.microsoft.com/gp/customer-service-phone-numbers

  I hope that these tips help you a bit

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Cannot install Windows server 2012

  Cannot install Windows server 2012. Whenever I get * error

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error code: 80246007 (cannot install Windows Live Essentials 2011)

  I don'tseem able to install updates automatic, quest is my wide ban and they switched to norton antiviris of a care of windows live, had problems since I went.  Cannot install windows live essentials completely, still the same code error 80246007.

  I already changed the setting in "bits" to allow updates to day and downloads by following the instructions in the help, no change can not load low HP Essentials * msi.

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Cannot install Windows update - error 8007003 - updated fails repeatedley

  Cannot install Windows update - error 8007003 occurs whenever I try to update

  Would have been nice if you included the Windows operating system you are using, but nevertheless (pick that applies to you).

  Windows XP

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Vista

  Windows Update error 80070003
  http://windowshelp.Microsoft.com/Windows/en-us/help/dc8636cd-4742-4e4e-B07C-a8cc9c684b261033.mspx

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0 X 80070002 ERROR_FILE_NOT_FOUND

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you try to download updates from Windows Update on a computer that is running Windows Vista: "error 0 x 80070003 the system cannot find the path specified."
  http://support.Microsoft.com/kb/942967

  And here's one for Windows 7

  Windows Update error 80070003
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070003

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot install windows update kb969947 error code 800F0816

  Cannot install windows update kb969947 (for vista) everytime I try after that restart the computer should go back to a previous restore point to operate

  error code 800F0816

  See the section "How to get help" of http://support.microsoft.com/kb/969947

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• cannot install Windows Live ID Sign-in Assistant 6.5

  Hi, I have a problem with my games for windows is. When I try to run it, it requires to install cannot install Windows Live ID Sign-in Assistant 6.5. So I downloaded and run the installation. In the middle of it, it stops and begins to restore the facility. After that, it says installation "Windows Live ID Sign-in Assistant 6.5 ended prematurely". I have XP SP3. Home Edition

  Thanks for the reply

  Hi Michalcerny,

  I see that you have tried several measures that have been suggested. I suggest that go you directly to Windows Live technical support options for more specialized Forum.

  www.windowslivehelp.com

  I hope this helps.

  Eddie B.

• Cannot install windows XP KB951847

  Cannot install windows XP KB951847.

  Fernando,

  KB951847 is an option, not the security update. Feel free to hide it.

  I. - stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  II. - remove the contents of the download file:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  III. - open Internet Explore (only!) to http://windowsupdate.microsoft.com & run a CUSTOM scan. Uncheck the box/deselect KB951847 and hide ("don't show me this update"). -right click it once HIDE

  Tip: If an update of root certificates is listed in updates software optional (in the menu on the left), install it to take full advantage of enhanced Internet Explorer security, but do NOT install any other optional software , nor updates optional hardware , just hide them, too.

  I V. - start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > [OK]
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  `~`

  The current time and the date now in Baja California, Mexico

  09:19
  Saturday, August 24, 2013
  DST - 0700 UTC
   
  UTC/GMT is 16:19 Saturday, August 24, 2013
              
  Current weather conditions in San Felipe

  Sunny86 ° F / 30 ° C